Used Arunda Template for sale (143)

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Blodpfx Asxzg Ubskaog Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 The Ion OneTouch 2 Instrument performs template amplification as part of the manual workflow for the Ion PGM, Ion Proton, Ion S5, and Ion S5 XL systems. It provides scalable template preparation for all Ion semiconductor chips. The instrument has a small footprint and fits easily on any bench top. For a fully automated workflow, please see the Ion Chef Instrument. The Ion OneTouch ES enrichment module is not included in this purchase. For both the Ion OneTouch 2 Instrument and ES module Efficiency and flexibility The Ion OneTouch 2 instrument integrates multiple manual template preparation steps into a single system. This enables parallel processing of multiple samples per day through modular design. It is flexible and supports scalable template preparation for all Ion semiconductor sequencing chips with up to 400 bases on the Ion PGM, up to 200 bases on the Ion Proton System, up to 400 bases on the Ion 520 and Ion 530 chips, and up to 200 bases on the Ion 540 chip. The need for gas is eliminated by the use of a peristaltic pump. Blodpfsxzg T Dox Akaeg Contributing technologies At the heart of the Ion OneTouch 2 Instrument are three breakthrough technologies that enable automated delivery of the template Ion Sphere particles. The first is the reaction filter that creates millions of microreactors in which clonal amplification occurs. The second is the fully integrated thermal cycler and disposable path amplification plate that enables robust thermal cycling of the microreactors. The third is the integrated centrifuge, which recovers the template Ion Sphere particles. Altogether this allows the OneTouch2 instrument to deliver massively parallel clonal amplification and recovery, all in a small bench top footprint.

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch ES This unit does not come with the Ion Torrent OneTouch ES Enrichment component of the Ion OneTouch 2 template amplification & ample preparation system 110-240VAC Bedpfx Aexzg T Rekaolg 50/60Hz 0.5 Amp

Condition: ready for operation (used), The machine is in very good condition and can be tested on site. Technical Data – Grinding Machine Machining area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (min-1): 5000 Feed rate (hod/min): 150 Table load (kg): 20 Control: BOSCH Bljdpfjwvgidsx Akajg Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20, or 1:50, suitable for rough grinding. If you have further questions, I am at your disposal.

Condition: good (used), functionality: fully functional, For sale is a copy milling machine from Makre Franz Kuhlmann KG, GM 1/2 series. The machine is fully functional and ready for immediate use. Technical specifications: X-axis (longitudinal travel): 330 mm Y-axis (transverse travel): 200 mm Z-axis (vertical travel): 280 mm Template table: 500 x 400 mm Spindle speeds: 4,200 – 20,000 rpm Spindle mount: Collet bores up to 8 mm possible Motor power: 0.5 kW Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) Weight: 430 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to help you. Trade-ins or exchanges are possible! Bjdpfxewal Dhj Akajlg Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: not inspected (used), 3 pad printing machines with comprehensive accessories for sale Bodpfjyrut Uox Akaelg Three pad printing machines are available for sale, all in perfect working condition. The machines only need to be adjusted to your specific printing templates. The package also includes: - At least 200 new, unused printing pads - New, etched printing plates (unused) - Additional accessories All machines operate flawlessly and are ready for immediate use once set up for the respective templates. Ideally, I would prefer to sell everything together as a complete package. Regarding the value of the pads: A single printing pad costs approximately €35–45 each, depending on the model, so the stock of pads alone represents a value of several thousand euros. If you are interested or have any questions, feel free to contact me. Videos of all three machines are also available! Just make me an offer.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, rotational speed (max.): 12,000 rpm, Horizontal cutting range using a stop 230 x 90 mm Blsdpfeyxgzxsx Akajg Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 23-07-12-045, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, table height: 910 mm, cutting width at rip fence: 1,000 mm, The machine is in very good condition with minimal signs of use! The machine was used for processing aluminum. Bjdpfxsytpxno Akajlg TECHNICAL DETAILS Maximum blade diameter: 550 mm Cutting width at CNC parallel fence: 1,000 mm MACHINE DETAILS Machine height: 910 mm Motor power: 7.5 kW EQUIPMENT Table extension: (length: 840 mm) Double roller carriage (length: 3,000 mm) 2 pneumatic quick clamps (application range: 0–90 mm) Eye-level control panel Template holder directly at the control unit Increased cutting height including saw blade tilting TIP-SERVO DRIVE CNC angle fence UNO 90 Additional cross slide incl. connection Front support roller Air cushion table Spray device Note: The machine comes from a business liquidation, has been professionally dismantled and placed in storage.

Condition: used, grinding wheel diameter max. 225 mm Blsdpfslf H Tgox Akaog diameter of tools max. 300 mm tool diameter min. 80 mm Weinig Rondamat 929 knife grinding machine for manufacturing profile knives. Production from a straight blank or regrinding of used knives using a template. Max. tool width: 230 mm Includes new coolant pump.

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist Bledpoxak H Esfx Akaog - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm Blodpfx Aksxak D Roaeg - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Bedexak Hxepfx Akaolg Fig. Shows a similar crane system

Condition: used, Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 7BCR250, type of input current: DC, input voltage: 220 V, measuring range X-axis: 200 mm, measuring range Y-axis: 80 mm, measuring range Z-axis: 100 mm, bolt circle diameter: 350 mm, total width: 750 mm, total length: 460 mm, total height: 1,100 mm, overall weight: 115 kg, repeat accuracy: 0.01 mm, input frequency: 50 Hz, The Helios 350‑V is a high-precision profile projector designed to meet the demands of metrology laboratories, machine shops, and quality control departments. Manufactured in Italy by LTF S.p.A., it combines advanced optical engineering, mechanical robustness, and user-friendly operation, making it an essential tool for reliably measuring small and medium-sized parts. Its industrial-grade optical system delivers a sharp, stable image, ideal for inspecting contours, radii, angles, and complex geometries in a non-contact manner. The high-contrast illuminated screen enables profile viewing with excellent clarity, supporting comparison with templates, grids, or digital measurements. The Helios 350‑V features a smooth and stable stage, purpose-built for repetitive measurements with tight tolerances. It comes equipped with a digital readout system for console-based alignment and measurement (Quadra Check 2000). Its illumination system ensures uniform projection, even on parts with complex geometries or low-reflectivity materials. Constructed from high-grade materials with a rigid framework, it guarantees dimensional stability and long service life, even in demanding industrial environments. Blsdoyuv Thepfx Akaog

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Bjdpfx Akowka Ntoaslg Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bodpfx Aeh Axk Ijkaslg Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, color: other, first registration: 07/2010, Year of construction: 2010, Serial number: no template Blsdpswx Ixlefx Akajg We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 08/2006, Year of construction: 2006, Serial number: UNKNOWN NO TEMPLATE. We have a stock of >100 axles. Bljdpfow Tkvujx Akajg Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/1995, Year of construction: 1995, Serial number: NO TEMPLATE We have a stock of >100 axles. Blsdpfjwx I Srex Akaeg Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2005, Year of construction: 2005, Serial number: NO TEMPLATE We have a stock of >100 axles. Bjdpfx Ajwx Nd Aekaolg Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2000, Year of construction: 2000, Serial number: NO TEMPLATE Bodpfxswx Nhze Akaelg We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2005, Year of construction: 2004, Serial number: NO TEMPLATE We have a stock of >100 axles. Bedpfjw Emxkex Akaolg Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 09/2005, Year of construction: 2005, Serial number: no template We have a stock of >100 axles. Bjdpfx Asxf Iqxjkajlg Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 09/2005, Year of construction: 2005, Serial number: no template We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Bodpfsxf Irvox Akaslg

Condition: used, Engraving machine including templates Bledpfxjywd I Ho Akasg

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms Bsdpfx Ajy Au Hqokajlg • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended