Used Anvil Substructure for sale (257)

Condition: new, Year of construction: 2026, Aluminum incline conveyor with substructure including leveling feet and machine feet for compensating uneven floors - Feed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Continuous removal plate 2.0 mm galvanized Drive roller + return roller made from S235 steel, welded and machined Ø150x620 mm crowned, shaft fixed with pillow block bearings. Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge 14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted Djdpfeyhzhbjx Afneun Belt material: 2-ply, especially cross-stable Due to the wave profiles on both sides, the usable belt width is reduced: Usable width 500 mm, calculated as follows: (Top view) Crosswise arrangement 50+500+50 mm

Condition: good (used), blacksmith's vise, bottle vise, anvil vise, anvil, blacksmith's anvil, bench vise, locksmith's vise, parallel vise Dodpfedl E Irjx Afneun -Jaw width: 135 mm -Wingspan: 150 mm -Number: 9 vises available -Price: per piece -Dimensions: 450/160/H900 mm -Weight: 35 kg

Condition: good (used), Bezel, steady rest, lynette Dusdjw S T Idspfx Afnsn -Bezel: with substructure, max. passage Ø 265 mm -Centre height: 340 mm -Edition: Brass -technical drawing: in the photos -Dimensions: 660/130/H900 mm -Weight: 122 kg

Condition: used, Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand Duedpfxsgmuz Ue Afnen -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg

Condition: used, Print roller, printer roller, spindle, anvil roller, pressure roller -Print roller: unfortunately no type designation Dodpfx Aegprkuefnsun -Technical dimensions: see photos -Dimensions: 295/100/H100 mm -Weight: 5.7 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Powder coating booth open spray booth Dimensions of the powder booth Width 2,000 mm Depth 2,100 mm Height 2,200 mm Dsdpfxjb Dxnws Afnjun Fan 1 fan 6000 m³/h Power 3 kW (electric motor) Filter 4 pcs. type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 pcs. 1" "Turbo" Italy Absolute filter 1 pcs. pocket filter type Wagner "Prima Sprint" powder gun Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour Powder combustion furnace Internal dimensions length 3,225 mm Internal width 1,400 mm Internal height 2,000 mm Insulation Rock wool 150 mm [75 kg/m³] Temperature Max. 220°C Fans 1 unit 4,500 m³/h Electric motors 1 pc. 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal output 39 kW Doors on both sides 2 manual, insulated with rock wool 150mm 70Kg/m³ Indirect heating via thermoblock, Heating chamber Tubular heat exchanger Burner* 1 electric heater Steel support for fastening conveyor technology IPE 80 *Choice of gas, oil or hybrid for an extra charge Manual conveyor technology Substructure Steel profiles IPE and SQ Bends 9040C 90 degrees, radius 600 mm 4 pcs. Rail system no. 9040 27m Roller units 9842 GLRHT 16 pcs. Connectors 9041 M 12 pcs. Fixing clamps 9047/100 16 pcs. Manual tongue switch 45 degrees 9401 AIYM 2 pcs. Load carrier L = 1000 mm 8 pcs.

Condition: new, Year of construction: 2025, Powder baking furnace 3,500 x 1,900 x 2,000 mm 1 Inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2.000 mm 4 Substructure 1 set of steel profiles 5 Walls 1 set of double-sided galvanized sheets 1mm, outside RAL 6 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m² 7 Floor furnace receives 2 drive-in rails for trolleys 8 Temperature 220°C 9 Fans 1 pc. 7.500 m³/hour 10 Electric motors 1 pc. 3 kW , 1450 U/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 Hinged doors one-sided 2 pcs. insulated with rock wool 150mm 75Kg/m² Heating indirectly by thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burner 1 pc. furnace is heated electrically 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide Dedpjfhv Tcsfx Afnoun

Condition: new, Year of construction: 2025, functionality: fully functional, temperature: 220 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Powder ovens in various sizes 1 Internal dimensions length 1500 - 6,500 [mm] 2 Internal dimensions width 1700 - 1,900 [mm] 3 Internal dimension height 2,000 [mm] 4 Substructure Steel profile 5 Walls 1 mm galvanized sheet metal on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Oven floor receives 2 entry rails for rack trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 Fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 Electric motors 1 - 2 pcs. 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal output 14 - 99 [kW] 12 Sash or sliding doors on one or both sides 2 - 4 insulated with rock wool 150mm 75Kg/m² Indirect heating via thermoblock 13 Thermoblock stainless steel INOX AISI 316 Heating electric or gas heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection Dedpfxjfhv Tle Afnsun

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ distance lower die block / ram gudeway 435 mm Throat 425 mm steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm power requirement 22,0 kW Dsdpfxevzxpbs Afneun weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Forging hammer as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Djdpovuullofx Afneun Forging hammer as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck video at seller's site before dismantling available

Condition: used, Year of construction: 2001, functionality: fully functional, NC rotary table Fibro 10.36.8 with face gear, year 2001 Duodpeyg N Hrjfx Afnon well maintained, very good condition, little used Pitch 120 teeth +/- 1" With hydraulic locking via face gearing, table top does not lift off Rotary table height 380 mm with substructure height 245 mm (total height 625 mm) Table size Ø 1180 mm Top table plate Ø 1300 mm, Table load approx. 5000 kg Table surface smooth, with dirt grooves with Siemens servo drive 1FT6105-8WF71-4EG2 and bevel gearbox Table speed max. 20 rpm with bevel gearboxes itot = 72 Tangential torque with motor operation 7200 Nm Total weight 3.800 kg without fixators, without installation and commissioning

Condition: good (used), functionality: fully functional, conveyor belt length: 4,130 mm, conveyor belt width: 600 mm, conveyor belt speed: 45 mm/s, total length: 4,150 mm, total width: 800 mm, total height: 350 mm, overall weight: 120 kg, power: 0.25 kW (0.34 HP), Equipment: type plate available, TAF item number: 1000005295 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 4,150 x 800 x 350 Width incl. side panel in mm: 660 Width incl. drive in mm: 800 Side panel height in mm: 90 Conveyor length in mm: 4,130 Conveyor width in mm: 600 Belt type: Smooth PVC Belt width in mm: 600 Substructure: not included (optionally available) Sliding surface: steel Drive: head drive Motor type: Gdv motor with brake Motor data: SEW 0.25 KW Conveyor speed in m/s: 0.045 Net weight in kg: 120 Function test: used, fully functional Dusdpoyf Iahefx Afnsn

Condition: new, - extra long - one piece - planing tables (2250 mm) from cast iron - simultaneous opening and closing of planer tables with locking system - heavy duty industrial style main motor - fixed suction hood - planer fence dimension 1200 x 150 mm with small parts fence - feeder with 4 feed speeds and separate motor - thicknesser table mounted on 4 solid spindles and linear guides - high quality steel anvil roller - rubber coated outfeed roller - digital display of thicknessing height - autom. star triangle switch techiscal data: total planer table lenght 2250 mm Dodscq E Uujpfx Afneun max. working width 520 mm max. chip removal 5 mm dimensions thicknessing table 850 x 520 mm min/max. working height 3/ 240 mm feed speeds 5/ /8 /12/ 18 m/min planer head dimension 120 mm/ incl. 4 pcs HSS cutter knifes planer head speed 5000 1/min main motor 400 V/50 Hz/S6 - 40 % 7,0 kW suction hood dimension 1 x 120 mm weight approx. 650 kg - "Teresa"-cutter block Ø 120 mm, mono block, with 4 knifes - additional fence for small work pieces - motorised height adjustment for thicknesser table with digital read out - thicknesser table with 2 rollers

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 90 mm, total width: 685 mm, total height: 150 mm, total length: 3,000 mm, conveying length: 3,000 mm, construction width: 685 mm, construction height: 150 mm, overall weight: 90 kg, working width: 500 mm, empty load weight: 90 kg, TAF item number: 1000005972 Manufacturer: TAF-Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 3,000 x 685 x 150 Width incl. side panel in mm: 685 Side panel height in mm: 140 Conveyor length in mm: 3,000 Conveyor width in mm: 600 Conveyor height in mm: 150 Roller pitch in mm: 90 Substructure: without (optionally available) Support roller axle type: M8 internal thread Support roller diameter: in mm 50 Support roller per axle: 1 Support roller material: steel Drive: Poly-V belt Motor type: 24V motor roller 35 ZMHT Motor data: Kyowa pulseroller Conveyor speed in m/s: max. 0.8 m/s Net weight in kg: 90 Dusdpfsyfh Acox Afnjn Condition: used / fully functional Function test: OK

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, total width: 540 mm, total height: 70 mm, total length: 1,200 mm, conveying length: 1,200 mm, construction width: 540 mm, construction height: 70 mm, TAF article number: 1000005066 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,200 x 540 x 70 Width incl. cheek in mm: 540 Cheek height in mm: 60 Conveyor length in mm: 1. 200 Conveyor width in mm: 500 Substructure: not available Idler roller Axle type: Threaded rod M8 / nut M8 Idler roller diameter in mm: 50 Idler roller per axle: 1 Dedpfxjwz Nknj Afnjun Idler roller material: Plastic Drive: Gravity Net weight in kg: 17 Function test: OK Condition: Used, fully functional

Condition: like new (used), Year of construction: 2025, functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 60 mm, total width: 550 mm, total height: 80 mm, total length: 1,125 mm, construction width: 550 mm, construction height: 80 mm, empty load weight: 45 kg, TAF item number: 1000005726 Manufacturer: TAF Year of manufacture: 2025 Overall dimensions (LxWxH) in mm: 1,125 x 550 x 80 Width incl. side panel in mm: 505 Side panel height in mm: 70 Conveyor width in mm: 500 Conveyor height in mm: 80 Substructure: without Curve (degrees): 70 Curve radius, inside in mm: 800 Curve radius, outside in mm: 1,300 Support roller axle type: 8 mm steel thread Support roller diameter in mm: 50 Support roller per axle: 3 Support roller material: plastic Roller pitch, inside in mm: 60 Roller pitch, outside in mm: 90 Drive: gravity Net weight in kg: 45 Condition: used / fully functional Function test: OK Dedpfxsxrdkue Afnjun

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll pitch: 90 mm, total width: 605 mm, total height: 80 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 605 mm, TAF item number: 1000003841 Manufacturer: TAF - Industriesysteme Year of manufacture: Unknown Overall dimensions (LxWxH) in mm: 2,970 x 605 x 80 Width incl. side panel in mm: 605 Side panel height in mm: 70 Conveyor length in mm: 2,970 Conveyor width in mm: 540 Roller pitch in mm: 90 Substructure: Not available Support roller axle type: Steel roller with rubber ring Support roller diameter in mm: 50 Support roller per axle: 1 Support roller material: Drive: Gravity Net weight in kg: Djdpjxdnfaefx Afnoun Condition: Used / fully functional Function test: OK

Condition: good (used), MPS EF 410 - 8 color Label Printing Machine Ref.: FGT 25-230 We are pleased to present this 2008 MPS EF 410 - a high-precision, versatile UV flexo press designed for a wide range of applications. The MPS EF 410 model is a servo-driven, 410mm wide, multi-substrate press, capable of running self-adhesive materials as well as unsupported plastic films. With robust features and premium components, this machine is engineered for reliable, high-quality production. _____ Key Specifications & Configuration - Printing Width: 410 mm - Technology: Servo-driven UV flexo press - Substrate Handling: Spiral rollers and chill drums for multi-substrate versatility _____ Machine Features - Unwind Unit with Lift - Web Guide & Splice Table - Teknek Web Cleaner - 8 Flexo Printing Units for optimal color flexibility - Automatic Registration Control ensuring precise alignment - Delam/Relam with Web Turn Bars - enables printing of 2 colors on reverse side - Anti-Static Bars across the web path - 9 GEW UV Dryers providing efficient curing _____ Enhanced Finishing Capabilities - Full Rail System allowing for tool movement along the press - Overlamination/Cold Foil with UV drying for premium effects - Double Die Station: o 1 x K&B Gapmaster Die for advanced control o 1 x Tecnocut Electronically Adjustable Anvil - Dual Web Inspection Cameras (Top & Bottom) - Razor Slitting for precise edge cutting - Waste Matrix Rewind and Product Rewind units _____ Additional Equipment & Accessories - Impression Cylinder Sets (x8): Sizes include 68, 72, 74, 77, 78, 80, 84, 88, 90, 93, 96, 99, 102, 104, 108, 114, 120, 128 - Magnetic Cylinders: Sizes include 136, 144, 148, 154, 160, 168, 176, 180, 93, 96, 99, 102, 104, 114, 120, 128 Dujdpsu Rdgbjfx Afnon - 22 Anilox Rolls in various sizes for consistent ink distribution _____ Technical and Optical Condition: - Technical: 9/10 (checked and in excellent running condition) - Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: new, Year of construction: 2026, KRBS 101 Combined pipe, profile and belt grinder Convenient operation due to easily adjustable clamping device The rotatable clamping jaws of the clamping device allow safe clamping of square tubes, round tubes and flat steel Adjustable grinding angle from 30 - 90° and from 0° - 60°. Due to the optimised quick-change holder, the tensioning pulley can be changed easily and quickly without tools Particularly durable due to larger and improved roller bearings Practical tension pulley holders integrated in the substructure Extensive range of tension rollers for grinding different pipe diameters available as accessories Quick change between pipe grinding and belt grinding possible Powerful motor Dsdpfjcnz Ayox Afnsun Almost all adjustments can be made without tools (operating tool included) Large, hinged protective screen with optimum field of vision 2 belt speeds for optimum adaptation to the respective material (15 m/s best for stainless steel and aluminium, 30 m/s perfectly suitable for steel) With two easily removable chip collecting containers Suction nozzle (Ø 100 mm) for suction systems available Suction units available as accessories Further developed, vibration reducing substructure Scope of delivery: 1 x standard sanding belt grain K 36 2 x spit collection container 1 x screw wrench 1 x sanding roller 42 mm Model KRBS 101 Article no. 3921001 Technical data Mains connection 400 V Mains frequency 50 Hz Motor power 2.5 / 3.3 kW Sc

Condition: used, Year of construction: 2010, functionality: fully functional, conveyor belt length: 3,350 mm, conveyor belt width: 290 mm, conveyor belt speed: 30 mm/s, total length: 2,450 mm, total width: 650 mm, total height: 2,250 mm, overall weight: 125 kg, discharge height: 2,200 mm, power: 0.18 kW (0.24 HP), Equipment: emergency stop, type plate available, TAF item number: 1000005841 Manufacturer: Trio-Technik Year of manufacture: 2010 Overall dimensions (LxWxH) in mm: 3,400 x 650 x 1,860 Width incl. side wall in mm: 380 Width incl. drive in mm: 550 Side wall height in mm: 200 Conveyor length, total in mm: 3,800 Conveyor length, horizontal in mm: 1,500 Conveyor length, vertical in mm: 2,300 Conveyor width in mm: 290 Dsdpsxyk Ehefx Afnsun Belt type: Plastic slats / link chain belt Belt width in mm: 300 Treads (height of treads/tread pitch) in mm: 50 / 36 Substructure: Rollable / height-adjustable Sliding surface: Steel Inlet height in mm: max: 200 min: 140 Outlet height in mm: max: 1,780 min: 1,720 Drive: head drive Motor type: angular gear motor Motor data: 50/50 Hz, 0.18/0.21 KW, 460/400 V Conveyor speed in m/s: 0.035 Net weight in kg: 140 Special features: Programmable cycle control / emergency stop, tunnel partially damaged Condition: used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 280 mm, conveyor belt speed: 80 mm/s, total length: 3,400 mm, total width: 650 mm, total height: 2,450 mm, overall weight: 150 kg, discharge height: 2,450 mm, motor manufacturer: Panasonic, Equipment: type plate available, TAF item number: 1000005844 Manufacturer: DynaCon Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 3,400 x 650 x 2,450 Width incl. side panel in mm: 380 Width incl. drive in mm: 600 Side panel height in mm: with side guide: 300 / without: 200 Conveyor length, total in mm: 4,000 Conveyor length, horizontal in mm: 1,000 Conveyor length, vertical in mm: 3,000 Conveyor width in mm: 280 Belt type: plastic slats / link chain belt Belt width in mm: 300 Cleats (cleat height/cleat pitch) in mm: 50 / 460 Substructure: rollable / height-adjustable Sliding surface: steel Inlet height in mm: max: 330 min: 280 Dedexy R R Rspfx Afnsun Outlet height in mm: max: 2,450 min: 2,400 Drive: head drive Motor type: Panasonic gear motor Motor data: 50 Hz, 400 V, 0.30 A Conveyor speed in m/s: 0.08 Net weight in kg: 150 Special features: programmed cycle control Condition: used / fully functional Function test: OK

Condition: good (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 3,300 mm, conveyor belt width: 285 mm, conveyor belt speed: 65 mm/s, total length: 2,900 mm, total width: 420 mm, total height: 2,150 mm, overall weight: 100 kg, TAF item number: 1000005827 Manufacturer: Fimatech Year of manufacture: 2007 Overall dimensions (LxWxH) in mm: 2,900 x 420 x 2,150 Width incl. side panel in mm: 330 Width incl. drive in mm: 360 Side height in mm: 250 Conveyor length, total in mm: 3,300 Conveyor length, horizontal in mm: 1,200 Conveyor length, vertical in mm: 2,100 Djdpfx Aox Dm Rbefnsun Conveyor width in mm: 285 Belt type: Plastic slats / link chain belt Belt width in mm: 300 Treads (height of treads/tread pitch) in mm: 50 / 320 Substructure: Rollable Sliding surface: Steel Inlet height in mm: 340 Outlet height in mm: Drive: Head drive Motor type: Panasonic Motor data: 50 Hz, 400 W, 0.12 A Conveyor speed in m/s: 0.065 Net weight in kg: 100 Special features: Including cycle control Condition: Used / fully functional Function test: OK

Condition: good (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 3,220 mm, conveyor belt width: 280 mm, conveyor belt speed: 100 mm/s, total length: 2,400 mm, total width: 440 mm, total height: 2,200 mm, overall weight: 100 kg, discharge height: 2,090 mm, TAF item number: 1000005820 Manufacturer: Fimatech Year of manufacture: 2007 Overall dimensions (LxWxH) in mm: 2,400 x 440 x 2,200 Width incl. side panel in mm: 330 Width incl. drive in mm: 380 Side height in mm: 250 Total conveyor length in mm: 3,220 Conveyor length, horizontal in mm: 1,100 Conveyor length, vertical in mm: 2,120 Conveyor width in mm: 280 Belt type: Plastic slats / link chain belt Belt width in mm: 300 Cleats (cleat height/cleat pitch) in mm: 50 / 350 Substructure: rollable / height-adjustable Sliding surface: steel Inlet height in mm: max: 320 min: 270 Outlet height in mm: max: 2,090 min: 2,040 Drive: head drive Dodpfx Ajx Dm Itofnsun Motor type: Panasonic drum motor Motor data: 50 Hz / 400 KW, 0.12 A Conveyor speed in m/s: 0.1 Net weight in kg: 100 Special features: incl. cycle control Condition: used / fully functional Function test: OK

Condition: good (used), Year of construction: 2019, functionality: fully functional, conveyor belt length: 2,920 mm, conveyor belt width: 375 mm, conveyor belt speed: 60 mm/s, total length: 2,350 mm, total width: 580 mm, total height: 1,710 mm, overall weight: 120 kg, discharge height: 1,750 mm, power: 0.12 kW (0.16 HP), Equipment: type plate available, TAF item number: 1000005780 Manufacturer: Amboss + Langbein Year of manufacture: 2019 Overall dimensions (LxWxH) in mm: 2,350 x 580 x 1,710 Width incl. side panel in mm: 390 Width incl. drive in mm: 560 Side height in mm: 220 Conveyor length, total in mm: 2,920 Conveyor length, horizontal in mm: 1,300 Conveyor length, vertical in mm: 1,620 Conveyor width in mm: 315 Belt type: Plastic hinged plate belt and plastic cleats Belt width in mm: 375 Cleats (cleat height/cleat pitch) in mm: 50 / 255 Substructure: rollable / height-adjustable Sliding surface: steel Inlet height in mm: max: 470 min: 320 Outlet height in mm: max: 1,750 min: 1,600 Drive: head drive Motor type: gear motor, TP63A4 Motor data: 0.12 KW Conveyor speed in m/s: 0.06 Dsdpfx Afoxv Dd Aoneun Net weight in kg: 120 Special features: Includes cycle control, continuous operation possible, automatic stop in case of belt blockage Condition: used / fully functional Function test: OK

Condition: good (used), Year of construction: 2014, functionality: fully functional, conveyor belt length: 2,510 mm, conveyor belt width: 415 mm, conveyor belt speed: 60 mm/s, total length: 2,040 mm, total width: 660 mm, total height: 1,265 mm, overall weight: 110 kg, discharge height: 575 mm, power: 0.12 kW (0.16 HP), TAF item number: 1000005779 Manufacturer: Amboss + Langbein Year of manufacture: 2014 Overall dimensions (LxWxH) in mm: 2,040 x 660 x 1,265 Width incl. side panel in mm: 790 Width incl. drive in mm: 660 Side height in mm: 220 Conveyor length, total in mm: 2,510 Conveyor length, horizontal in mm: 1,310 Conveyor length, vertical in mm: 1,200 Conveyor width in mm: 415 Belt type: Plastic hinged plate belt and plastic cleats Belt width in mm: 430 Cleats (cleat height/cleat spacing) in mm: 30 / 485 Duodextaaujpfx Afnon Substructure: Rollable / height-adjustable Sliding surface: steel Inlet height in mm: max: 575 min: 325 Outlet height in mm: max: 1,460 min: 1,210 Drive: head drive Motor type: gear motor, TPG3A4N Motor data: 0.12 KW Conveyor speed in m/s: 0.06 Net weight in kg: 110 Special features: Includes cycle control, continuous operation possible, automatic stop in case of belt blockage Condition: used / fully functional Function test: OK