Electric forklift lift truck, ant, pedestrian stacker JUNGHEINRICH type EJE 116
machine. No.: 98015892 Year of construction 2010
lifting capacity: 1600 kg
lifting height: 200 mm
fork length: 1180 mm
Operating voltage: 24 Volt
Bscvqsjwfu
Total length: 1750 mm
Total width: 730 mm
Overall height with drawbar: 1300 mm
- Drive battery 24 Volt, 250 AH, type 2EPzS250, year of construction 2016
- Battery automatic charger 24 Volt, 30 Amp.
weight approx. 560 kg
good condition
Three-phase motor, electric motor
-Power: 0.25 kW
-Speed: 1400 rpm
-Shaft: Ø 14 mm
Edfrasags
-Construction: B3
-Protection class: IP 33
-Dimensions: 260/220/H240 mm
-Weight: 12 kg
JUNGHEINRICH AMEISE EJE 214 STAPLER HUBSTAPLER used
We offer here from different company dissolutions articles, which we describe as well as possible, as well as meaningful photos adjust. Further information about the article can not be given.
We offer the possibility to visit Tuesday and Friday in the time between 9 and 16 o'clock after telephone appointment arrangement. If necessary, the article can be taken away immediately.
Due to time constraints, we can only offer answers to this article i...
Forklift trucks, electric stackers
Mitsubishi FB16ANT with only 96 hours
Basic load capacity 1600kg, with 5490mm HH and 500mm load centre still 1400kg
lifting height approx. 5490mm, triplex mast with full free lift
Fork carriage with integrated sideshift
fork length 1150mm
Battery Hoppecke 48V/625AH from 07/2019 with Aquamatik
2 LED work lights in the front, one in the rear
1 key
Fingertip-Control, very sensitive and change of driving direction via switch in the armrest
Switchable between ECO an...
From a company liquidation
Hyundai 14MS(L)-7NTLL42
Year of construction 2012
Operating hours read 290
1400 kg load capacity
Lifting height 4200mm
free lift 1338mm
Triplex mast
serial no. 910332
Emergency switch
Bbgs9gon
overall height 1989mm
with charger 24Volt 30A
slow speed
--horn without function
battery must be renewed soon
Still EXD SF 20 High lift truck
E-ant
+ charger
+ driver's stand lateral hold
fork length 120 cm
Year 2011
From the manufacturer the following information
The EXD-S is a heavy-duty double deck high lift truck that can lift a maximum of 2,000 kilograms when using the initial lift or twice 1,000 kilograms when using the double deck loading and unloading.
With the EXD-S, two pallets can be transported at the same time
- so that trucks can be loaded and unloaded in a time-saving and effectiv...
Electric forklift truck, low lift truck, ant, pedestrian stacker STILL type EXU 16 AC
machine. No.: 710150308323 Year of construction 2009
rated capacity 1600 kg
lifting height 200 mm
fork length 1180 mm
Total length 1750 mm
Total width 730 mm
Overall height with drawbar 1350 mm
Operating voltage 24 Volt
- battery, new from year of construction 05/2021 24 Volt, 150 AH, type 2 PzB 150+BFS
- integrated charger 24 Volt, 30 Ampere
Vughgm
- 611 operating hours read off
- New TÜV inspection UVV
weight...
JUNGHEINRICH ANT EJE 214 FORKLIFT LIFT TRUCK
Ojns0br2
it is offered: EJE 220 Jungheinrich used
(other photos for info)
currently 3 pieces in stock !!
We offer here from different acquisitions articles, which we describe as well as possible, as well as set meaningful photos. Further information about the article can not be made.
We offer the possibility to visit Tuesday and Friday in the time between 9 and 16 o'clock after telephone appointment arrangement. If necessary, the article can be taken...
From a company liquidation
Stöcklin EDD 12 with initial lift
Year of manufacture 2018
Serial no.20160518
Operating hours read 1762
Rated capacity 1200kg
empty weight without battery 640kg
Bvy8c7g8
max lifting height 2050mm+ inital stroke 100mm= 2150mm
1150mm fork length
Battery charger flexy Plus year of construction 2017 24 Volt 30Ampere
Emergency stop
overall height 1530mm
horn
optical traces of use
An electric high lift truck is offered from an insolvency
Manufacturer Jungheinrich
Model EJC 12,5G 80-360 T
year of manufacture 1981
Machine no. 721385107
Technical data:
Load capacity 1250kg with 600mm load centre
max. lifting height 3600mm
Clearance height 2250mm
Barge length 1200mm
Protrusion approx. 570mm
Operating hours read 5318,54
Own weight without battery 850kg
Weight of the battery approx. 100kg
Battery 180AH 24 Volt
Be3pi07fuz
--without a charger--
From a company liquidation
Stöcklin EDD 12 with initial stroke
Year of construction 2017
serial no. 2017517
Operating hours read 2972
rated capacity 1200kg
Empty weight without battery 640kg
max lifting height 1450mm+ initial stroke 100mm= 1550mm
1150mm fork length
Charger Powertron E Year of manufacture 2018 24 Volt 40Ampere
Emergency stop
overall height 1210mm
Horn
Bov3m2anm8
obvious signs of wear
Play in the slewing ring bearing (drawbar) must be replaced soon
Offered from an insolvency is an electric low-lift pallet truck
I8iiuojyy
Manufacturer Hyster
Model 9 1.6
Year of manufacture 2019
Machine No. A418T07218T
Technical data:
1600kg load capacity
Battery 24V 2PZS 150Ah with Aquamatik, integrated charger
Own weight 325kg without batteries
130mm stroke
more data will follow...
Condition Used
Bppoi8lbbj
This listing is for a Grant UBR2 Heat block
Field of application: Internal logistics
Icttoco0k
DC motor, servo motor, gear motor, electric motor, direct current gear motor
-Manufacturer gearbox: Atlanta, type 58 44 215 i 14.5
-Power: 2.45 kW / n1 1500 rpm
-Manufacturer motor: Siemens, type 1 FT5072-OAFO1-2 / brake 1 FU1050-6GF
-Motor: 150 V / 10.0 Nm // 3000 rpm
-Hollow shaft: Ø 38 x 125 mm
-Shaft: Ø 16 x 40 mm
Ije9acwy0
-Dimensions: 540/275 / H230 mm
-Weight: 29 kg
Press brake
Model: CNC
Manufacturer: :HACO
Type: :PPES30110
Year of man.: 1989
Power: :110t
Vunuti
Maximum bending width: 3100mm
Control: HACO Robosoft PC-20
Including :tooling.
5 St.
dimensions innen 455 x 600 mm
Furnishing:
- Tool cabinet with 5 drawers
- Tool drawer fully stocked
- drawer extension 88%
- Usable dimensions inside: 455 x 600 mm
- lockable
- mobile
Dmkyval
Field of application: Internal logistics
Bzuudtj
Empty weight: 6.000 kg
Lifting capacity: 30.000 kg
Condition Used
This listing is for a Electromantle EM 1000 MK1
Npihh
Field of application: Internal logistics
Technical condition: very good
Tennant T12 scrubbing/suction machine
* New, demo
* 11 hours!
* Extra high pressure cleaner
* Still new
Bvrzyoqhwn
Workbench, work table, assembly bench
-Width: 2000 mm
-Depth: 995 mm
-Height: 890 mm
Razj2kymp
-Number: 2x drawers
-Weight: 126 kg
Offered is a used and reconditioned 2012 Tennant T 16 ride-on scrubber dryer with 2,186 hours read.
A heavy duty 36 V 320 AH trough battery with Aquamatic filling system is installed. The original Tennant battery charger is also included.
This Tennant T 16 is factory equipped with ec-H2O technology but can also be easily filled with water and detergent like any other scrubber dryer.
This T16 battery-powered ride-on scrubber-dryer lowers operating costs.
Up to 20% lower operating costs compare...
5 St.
dimensions innen 455 x 600 mm
Furnishing:
Bpbllrzyei
- Tool cabinet with 5 drawers
- Tool drawer fully stocked
- drawer extension 88%
- Usable dimensions inside: 455 x 600 mm
- lockable
- mobile
General Data
Measurements width 3850 MM
Measurements depth 1600 MM
Cftxvjz
Measurements height 1700 mm
Machine weight 4500 kg
Control Unit
Brand ATLANTIC
Model SP8
Main Drive
Number of strokes 9 - 17 Hub/min
Media
Main electronic connection 380 V / 50 Hz
Power consumption 7.5 kW
Additional Equipment
Support arms
Electric back gauge
Foot control
This ATLANTIC ATS 3006 shearing machine was made in the year 2004. It is operated through an Atlantic SP8 control unit. This machine works with a cu...
Condition Used
This listing is for a Grant-bio PS-3D Sunflower Mini-shaker with platform3D MiniñShaker provides adjustable three-dimensional smooth rotation of the platform and is designed for mixing blood samples, for minigel staining and destaining, sample washing, blot hybridization reactions.
Bfimmiashs
Field of application: Internal logistics
Working width: 9.100 cm
Tennant T 15 scrubber drier
* Refurbished in 2015
* 2138 hours
Bwoeel9nlw
* Good battery and charger
* Completely OK
Engraving cutters, burin cutters, end mills, end mills, milling cutters
-Incl. Packaging: 18 kg cutter
-different diameters
-Material: HSS, SS, carbide, others
-is only sold complete
Rnby2iuvm
-Weight: 18 kg
Type of fuel: Diesel
Field of application: Grounds care
Empty weight: 870 kg
Working width: 110 cm
Serial number: 235420174
- Brand : Tennant
-Type : 235D
- Year of construction: +/- 1995
- Hours : 1342
- Drive : Diesel
- High tipper body
- Sweeper underside
- Front Sweep Brush
- Dust extraction
- Dust filter
Bxbxujgczh
- Indoor and outdoor use
- Industrial sweeper
- Multiple photos on our website
- Trade-in and transport possible
pressure 100 t
chamfer lenght 2600 mm
distance between columns 2100 mm
stroke - stepless adjustable 120 mm
column arm 250 mm
table width 180 mm
table height 875 mm
ajustment speed 70,0 mm/sec
working feed 7,0 mm/sec
return speed 60,0 mm/sec
Control NC ATL 550
total power requirement 5,6 kW
weight 6.900 kg
range L-W-H 2900 x 1700 x 2240 mm
** Machine with increased installation height
** Cylinders (Y1 + Y2) have been completely overhauled (!!)
Furnishing:
- NC controlled hydraulic press brak...
sheet width 3050 mm
plate thickness 12 mm
distance between columns 3100 mm
table height over floor 900 mm
Bwpvyhyesg
cutting angle adjustment 0,5 - 3 °
no. of strokes 6 - 13 Hub/min
back stop - adjustable 1000 mm
down holder 18 St
oil volume 350 l
total power requirement 22,5 kW
weight of the machine ca. 8 t
dimensions of machine L x W x H 3,96 x 2,38 x 2,22 m
Accessories: electr. back gauge, spare knives
Condition Used
Listing Grant Sub Aqua 12 VDB12EU Digital Water Bath
Quantity 1.0
Cdpapg23
This listing is for a Grant Sub Aqua 12 VDB12EU Digital Water Bath.The Grant SUB Aqua 12 is a robust, high quality water bath for direct immersion of samples. It combines reliability, performance and value for money and provides excellent temperature stability for a wide range of routine laboratory applications.12-litre high grade stainless steel tank (other models/sizes also available)Ambient +5oC to 99oCE...
Field of application: Internal logistics
Haszgir
Tennant T7 scrubber drier
* 2007
* Few hours
* Good batteries and charger
* In good condition
Workbench, work table, assembly bench
-Width: 1900 mm
U7posfen
-Depth: 700 mm
-Height: 845 mm
-Number: 2x drawers
-Weight: 90 kg
Type of fuel: Diesel
Field of application: Grounds care
Empty weight: 870 kg
Working width: 110 cm
Serial number: 235420304
- Brand : Tennant
-Type : 235D
- Year of construction: +/- 1995
- Hours : 978
- Drive : Diesel
- High tipper body
- Sweeper underside
- Front Sweep Brush
- Dust extraction
- Dust filter
- Indoor and outdoor use
- Industrial sweeper
Bxbxvfztvk
- Multiple photos on our website
- Trade-in and transport possible
3
60.000 €
Starting bid plus VAT
9 days left
9 days left
Make: Anton van Kaick
Type: DK BN 38/125-41S
Pj9tr
equipment:
- Oil treatment plant
- switch cabinet
6
1.500 €
Bidding plus VAT
17 days left
17 days left
with evaluation hardware
Bwrieiadph
Condition Used
Bnnvhbtpf3
This listing is for a Grant Boekel Scientific incubator HIS25
Field of application: Internal logistics
Bpd7zb9wa0
Technical condition: very good
Tennant VLX 1870S New, unused!
* New
* Sonnenschein batteries !!
Hot water tank, electric boiler, electric heating
Ryshh8drw
-Content: 80 liters
-Power: 2/4 kW
-Dimensions: 500/500/H970 mm
-Weight: 54 kg
2000pcs available
teflon coated
Bxfqoh0w8t
Field of application: Internal logistics
Empty weight: 2.591 kg
Serial number: M30-1783
EPA Marked: yes
Forklift equipment: Wet/dry vacuum
- Brand: Tennant
- Type: M30
- BJ: 2012
- Scrub wipe combination
- For parts
Ysg2c0
= More information =
Type: Scrubber
Year of manufacture: Jan 2012
Colour: Green
Technical condition: good
Visual appearance: good
