Used Alzstar 40 for sale (22,636)

Condition: excellent (used), Year of construction: 2012, Meyn Deboner Type: D40 Deboner type: poultry thighs and drumsticks Performance: up to 2400 pieces per hour depending on application Isdpfeqwguyox Ag Ueht Dimensions: 1500x1300x2000 Weight: 500 kg Year : 2012 We encourage a personal inspection, where you can assess the machine on-site, evaluate its performance, and confirm its high quality Preview Video

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,068 h, load capacity: 4,000 kg, lifting height: 3,240 mm, construction height: 2,300 mm, overall weight: 5,080 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 4,000 kg Lift height: 3,240 mm Overall height: 2,300 mm Fork length: 2,400 mm MACHINE DETAILS Drive type: 6-cylinder LPG engine Front tires: 8.25-15 (70%) Rear tires: 7.00-12 (60%) Weight: 5,080 kg Operating hours: 7,068 h EQUIPMENT 3rd hydraulic valve Rear work lights Iodox E Tgzjpfx Ag Ujht Side shifter

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 220 mm, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 220 mm, center height: 200 mm, turning length: 1,000 mm, TOS SN 40B Gap Bed Lathe Model: SN 40B Swing over Bed: 400mm Swing over Saddle: 220mm Isdpfxjxxyy So Ag Ueht Swing in Gap: 600mm Distance Between Centres: 1000mm Spindle Speeds: 22 – 2000 RPM Spindle Bore: 50.8mm Motor: 5.5 KW Machine with: 3 jaw chuck 4 jaw chuck Quick Change Toolpost Fixed Steady

Condition: used, Year of construction: 2013, Mori Seiki NVX5100-II/40 Vertical Machining Centre with MAPPS IV/M730BM Control, Travel X/Y/Z = 1050/530/510mm, Table Size 1350 x 600mm x 1200kgs, Spindle Taper BT40, 30 Position ATC, Max Spindle Speed 13,000rpm, High-Pressure Through Spindle Coolant, Swarf Conveyor, Machine Weight 7,000kgs, Floor Space (L x W x H) 3084 x 2851 x 2597mm. S/No. NV502130614 (2013) Ihodpfx Asx Syfkjg Ujt Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), axle configuration: 3 axles, first registration: 01/2001, suspension: air, tire size: 385/65R22.5, color: red, Year of construction: 2001, Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Brakes: drum brakes Suspension: air suspension Ihodpfxsx Tph Ro Ag Ust Weights Empty weight: 5.800 kg Carrying capacity: 33.200 kg GVW: 39.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: good (used), axle configuration: 3 axles, first registration: 01/2001, suspension: air, color: red, Year of construction: 2001, Equipment: ABS, Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Weights Empty weight: 5.800 kg Carrying capacity: 33.200 kg GVW: 39.000 kg Ihodpfx Aox Td S Rog Ujt Maintenance, history and condition APK (MOT): tested until 07/2026 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Year of construction: 2009, condition: good (used), Transport wagons, heavy-duty wagons, electric heavy-duty rail wagons, rail wagons, trailers Iedjyam H Aepfx Ag Usht -Manufacturer: Seacom, Trailer heavy-duty rail wagon with drive -Type: GWN 40t -Platform: 4000 x 2500 mm -Load capacity: 40,000 kg -Roller spacing: 1500 mm -Overall dimensions: 4060/2500/H770 mm -Empty weight: 2400 kg

Condition: new, Year of construction: 2025, number 40-teilig weight 47 kg condition Neu FIX KIT 40 - The Comprehensive Solution Set for Welding Tables Stock Number: FIX40 Weight: 47 KG Shipping: Pallet Shipping (not included in the price)# Ijdpfx Agjw T Uzhe Ueht CONTENTS 2x Clamping and Squaring Angle 175 x 50 x 175 mm 2x Clamping and Squaring Angle 275 x 50 x 175 mm 4x Stop 100 x 50 x 25 mm 4x Sliding Stop 150 x 50 x 25 mm 4x Large Universal Stop 225 x 50 x 25 mm 2x Clamping and Squaring Angle 75 x 50 x 75 mm 2x Prism D58 x 90° 58 x 50 (H) - 90° 4x 180° Clamp 300 x 300 mm 2x 45° Clamp 300 x 300 mm 1x Round Brush 1x Grounding Device 12x Quick-Release Bolt 28 x 75 mm Clamping range between 70-75 mm. Also available individually and in a 50 mm version. Specifically designed for welding tables, the FIX KIT 40 emerges as a comprehensive 40-piece fixture kit. With a precise bore diameter of 28 mm, it ensures seamless integration and adaptability. Not only is this set robust and durable, but it's also perfectly tailored to the requirements of welding tables. The FIX KIT 40 offers a tailored solution for customizing your tool equipment. The included modules are carefully selected to create clamps and fixtures with the utmost precision and efficiency. This allows you to optimize your workspace according to your specific needs. In a world where adaptability and precision are paramount, the FIX KIT 40 sets new standards. It's not just a kit; it's a key tool that aids you in making your work processes more effective and efficient.

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Ihsdouddfbepfx Ag Uot Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, Year of construction: 2002, Load per column / Load per cantilever / Cantilever lenght / Rack height / OHRA cantilever racking 5500x600mm 3000kg / per side Iodpfox E Duijx Ag Usht Dimensions Length: approx. 5500mm Arm length: 500mm Arm load: 500 kg /max Per side: 3000 kg /max Year of manufacture: 2002

Condition: excellent (used), Netzsch Type: DSC 200 F3 Maia® Measuring Device NETZSCH DSC 200 F3 Maia® with Intracooler 40 Differential Scanning Calorimeter incl. accessories Description / Scope of Functions A DSC is used for the thermal analysis of materials. It measures the heat flow that occurs in a sample during physical or chemical processes when it is heated or cooled in a controlled manner. The device enables the investigation of the following material properties, among others: - Melting and solidification temperatures - Glass transition temperatures (Tg) - Crystallization - Phase transitions - Reaction enthalpy - Heat capacity - Purity determination of substances Typical fields of application: - Materials research & development - Plastic and polymer analysis - Metal and alloy analysis - Chemistry, pharmaceuticals, ceramics - Quality assurance & laboratory analytics The Intracooler 40 enables active cooling below room temperature without the need for liquid nitrogen and significantly extends the temperature range. Scope of delivery (as pictured): - NETZSCH DSC 200 F3 Maia® measuring device Iodpfxjyaatpj Ag Uoht - NETZSCH Intracooler 40 - Original measuring and handling tools - Calibration and reference materials (indium, tin, bismuth, zinc, aluminum, silver – approx. 400 mg each) - Several original packs of DSC crucibles (aluminum, 25 µl) - Original transport and storage boxes - Comprehensive NETZSCH original documentation (user manuals, instrument manuals, software manuals) - NETZSCH Proteus® software incl. data carrier and USB dongle Technical data (excerpt) DSC 200 F3 Maia® Power supply: 230 V / 50 Hz Power consumption: approx. 500–800 W Temperature range (with Intracooler 40): approx. -40 °C to +600 °C (depending on configuration) Measuring principle: Differential Scanning Calorimetry (DSC) Intracooler 40 Power supply: 230 V / 50 Hz Current consumption: 2 A Refrigerant: R507 Protection class: IP21 Max operating pressure: 24 bar Dimensions & weight (approx.): DSC 200 F3 Maia®: Dimensions (W × D × H): approx. 60 × 45 × 25 cm; Weight: approx. 35–40 kg Intracooler 40: Dimensions (W × D × H): approx. 30 × 40 × 50 cm; Weight: approx. 30 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we would be happy to answer them by phone.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: IRB4600-40/2,55 IRC5, load capacity: 40 kg, arm reach: 2,550 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot. 100% complete and fully functional: includes robot arm, controller, all cabling, and teach pendant. Supplied with our warranty and a detailed 77-Point Protocol evaluation, performed by our in-house robotics engineers. Brand: ABB Model: IRB4600-40/2.55 IRC5 Controller: IRC5 Payload: 40 kg Reach: 2.55 m Mounting options: floor, shelf, inverted, or angled Robot arm weight: approx. 465 kg The IRB 4600 is a highly productive, general-purpose robot optimized for short cycle times, ideally suited for creating high-density cells with its compact form factor. This robot facilitates the design of more compact manufacturing cells, resulting in increased throughput and improved product quality—directly translating to enhanced productivity. Suitable applications: - Arc welding - Assembly - Material handling - Machine tending - Material removal - Cleaning/Spraying - Dispensing - Packing - Laser cutting - Laser welding IRS Robotics® refurbishment includes: - 77-Point Protocol: thorough testing on our in-house test benches - Fresh oil/grease Isdpfxsxwm Rzs Ag Usht - New batteries - Deep cleaning - Repainted in your preferred RAL colour - Accuracy status measurements (repeatability, accuracy, backlash) About us: We are specialized in daily delivery of fully refurbished A-Brand robots: ABB, KUKA, FANUC, YASKAWA. Established in 2002. Worldwide shipping available.

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A Ihjdewg Hunepfx Ag Uot voltage 24 V weight of the machine ca. 3,5 t

Condition: used, Year of construction: 1970, pressure 40 t Iodpfx Agjvxltbs Usht stroke 150 mm serial number 100091 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t safety light frame ja bei beiden

Condition: excellent (used), Binder Model MKF 115 E3.1 Binder Climatic Test Chamber Model MKF 115 E3.1 Temperature range: -40 °C to +180 °C Humidity range: 10 % RH to 98 % RH Integrated 20 L water reservoir 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with LED chamber illumination Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ Basic Edition Fault diagnosis system with visual and audible alarms Intuitive touchscreen controller with time-segment and real-time programming Internal data logger, measurement data exportable in open format via USB 50 mm access port with silicone stopper, left side Class 2 temperature safety limiter (DIN 12880) with visual alarm 4 casters (2 with locking brakes) Computer interface: Ethernet 230 V outlet on right side control panel Adjustable ramp function Integrated strip chart recorder Real-time clock Door heating Alarm notification on low water level in the fresh water tank 2 stainless steel shelves Hose burst protection, incl. water supply and drain up to 1m height Interior chamber made of stainless steel Cooling by compression refrigeration unit Ihedpfx Aox Ux Ivjg Ujt TECHNICAL DATA: Cabinet dimensions: Width 1000 mm Height 1725 mm incl. feet/castors Depth 865 mm incl. lugs &/connections Interior dimensions: Width 600 mm Height 480 mm Depth 400 mm Volume: Chamber volume 115 liters Net device weight (empty) 280 kg Max. total load 60 kg Max. load per shelf 30 kg Performance data Temperature: Temperature range -40...180°C Temporal temperature deviation 0.1...0.6 ± K Spatial temperature deviation 0.1...1.3 ± K Average heat-up rate according to IEC 60068-3-5: 5.5 K/min Average cool-down rate according to IEC 60068-3-5: 4.5 K/min Max. heat compensation 2500 W Climate performance data: Temperature range 10...95°C Humidity range 10...98 % RH Temporal temperature deviation depending on setpoint 0.1...1.3 ± K Max. heat compensation 400 W Electrical data: Rated voltage 400V 3N~ ±10% 50Hz Rated power 4.5 kW 7.5 A Energy consumption at 25°C / 60% RH 1.25 kW Fittings: Number of shelves 4/4 (std./max.) Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) If you have further questions, we would be happy to answer them by phone.

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm Ijdpfjd N Smhox Ag Uoht tool taper SK50 weight of the machine ca. 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1988, tail stock ja Isdou Su I Eopfx Ag Ueht ja condition nicht geprüft weight of the machine ca. 3,8 t

Year of construction: 1989, condition: used, Axis 3 serial number 84095 tool taper BT40 toll turrets 12 table surface area 1300 x 400 mm no. of flutes 3 T-Nuten T-slot - width 18 mm Ihsdpfxjwhqz Ue Ag Uot control FANUC dimensions ca. 3000 x 2500 x 2500 mm

Condition: used, Attachment suited for: Construction machines Ihjdpfx Ageyap Ntj Ust

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Iedpfx Asx Ux Eueg Uoht Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: excellent (used), Tap Make Reishauer Type MF 40 x 2.5 L Iedpfxedx Ugys Ag Usht

Condition: good (used), Trapezoidal taps Diameter 40 mm Ijdpedx Uy Iofx Ag Ujht Pitch 1/5 inch

Condition: used, Year of construction: 1980, taper MK 4 serial number 520 Ijdpfx Agjw Sydle Usht weight of the machine ca. 440 kg

Year of construction: 2004, condition: used, functionality: fully functional, empty load weight: 3,900 kg, load capacity: 10,000 kg, 20/40' Hydraulic Spreader Isdpfx Agsx U Hh Rj Uoht ISO Class: Terminal West Technical Condition: Good Description: Twistlock Spreader, Terminal West Twistlock Spreader, Terminal West

Condition: like new (used), Year of construction: 2012, operating hours: 191 h, functionality: fully functional, compressed air connection: 20 bar, pressure: 20 bar, Cold Jet Aero 40 HP This machine is suitable for industrial cleaning, from routine tasks to very large projects. The advantage of this unit is its lack of next-generation electronics, making it straightforward and robust. It is considered one of the most aggressive and effective machines on the market. The machine is in excellent condition. Cold Jet Aero 40 HP Dry Ice Blasting Machine – Complete with the Following Equipment: - COLD JET AERO 40 HP DRY ICE BLASTER (191 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) Price: €19,500 This is one of the best machines available worldwide. It contains no electronic control systems, which makes it extremely reliable and reduces maintenance costs. For inquiries or to arrange a viewing, please contact DrDryice. All machines are sold with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines and also supply new Cold Jet models. Contact us for more information. Worldwide shipping available. Relevant keywords: Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting machine Dry ice blasting machine | dry ice blaster | dry ice cleaning Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale dry ice blasting machine for sale Cold Jet dry ice blasting machines various models Maintenance and repair of Cold Jet dry ice machines Ihodpfowyk Uxox Ag Uot