Used Alzmetall Ab 3 for sale (128)

Condition: used, Year of construction: 1975, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 65 - 1750 U/min table-size 425 x 500 mm column diameter 155 mm feed 0.1-0.2-0.3 m/min spindle taper MT 4 MK engine output 0.9 / 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Machine from a vocational school good / well-maintained condition (!!) Equipment: - robust motor-driven pillar drill with VARIO drive (V-belt) - electro-automatic spindle feed - pole-changing motor - stepless speed adjustment (VARIO drive) - adjustable drilling depth stop - machine table with 2x T-slots * height adjustable via hand crank Kolev Dxwqohcdw Djlp - 1x used machine vice - machined base plate - coolant device - connection cable + connection plug - original operating instructions

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 30/35 mm throat 300 mm bore stroke 140 mm table-size 700 x 500 mm spindle taper MT 3 number of spindle speeds 65 - 1750 UpM total power requirement 1,7 kW weight of the machine ca. 0,7 t Klelhcdsu Rt Hqow Dep dimensions of the machine ca. 1 x 1 x 2 m Pillar drilling machine.

Condition: used, Year of construction: 1983, bore capacity in steel (diameter) 30 mm Kjlhsvzlp Iscdw Djlp weight of the machine ca. 0,3 t dimensions of the machine ca. 0,6*1*2,3 m

Condition: used, ALZMETALL column drilling machine type AB 3 ES Mach. No. 21703, year of manufacture 1981 Drilling capacity 32 mm Spindle mount MK 3 - long spindle Thrust 290 mm Spindle stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Spindle speed 55 - 1450 rpm. stepless Motor power 0.9 and 1.3 kW, pole-changing Mains connection on the type plate 500 volts, 50 Hz. Mains connection tested 400 volts, 50 Hz. - tested without power restriction - Spindle speed via 2 gear stages, 2 motor speeds and stepless via variator gear - Countershaft stage for high torque at low speeds - Tachometer for the spindle speed - Table height adjustment via hand crank - Machine light - Emergency stop via foot switch and impact switch - Keyless drill chuck 1 to 13 mm Space requirement L x W x H 1200 x 650 x 1900 mm Weight 400 kg Kolevu Dv Hohcdw Djlp very good condition Machine tested with drill Ø 30mm in steel - runs very well

Condition: good (used), Alzmetall AB 3 ES - Pillar drill -Drilling capacity / steel 35mm -Thrust 280mm -Drilling stroke 180mm -MK 3 mount -Table size 600x470mm -Continuous speed control -Drilling depth stop -Drill chuck -Documentation Klelsvtzrvjhcdw Djp Dimensions: LxWxH1.2x0.8x2.1 meters / weight 550 kg Errors / input errors reserved

Condition: used, ALZMETALL column drilling machine type AB 3 ESV Mach. No. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 - short quill Distance spindle nose - table 545 mm (short quill) Distance spindle adapter - table 395 mm (MK adapter) Thrust 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 - 1450 rpm. stepless Motor power 1 / 1.6 kW Mains connection 380 volts, 50 Hz. - Spindle speed via 2 gear stages, 2 motor speeds and stepless via variator gear - Countershaft stage for high torque at low speeds - MK adapter from MK3 to MK4 Kslhjharwvscdw Dolp - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotating drilling table - Table height adjustment via hand crank - Machine base with machined workpiece support surface - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Year of construction: 1978, Condition: used, number of spindles 3 Kelhcdwjd Ih S Ss Delp bore capacity in steel (diameter) 40 mm bore stroke 180 mm weight of the machine ca. 2,3 t

Condition: used, Year of construction: 2007, Technical details: x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm distance spindle /table: 125 / 925 mm control: Heidenhain iTNC 530 number of spindle speeds: 9000 steples U/min. max. torque on the spindle: max.82 Nm switched on hours: 43363 h spindle hours: 16319 h tool changer with: 24 Plätze table-size: 1250 x 630 (Kreuzschiebetisch) mm max. table load: 1000 kg spindle taper MT: SK40 spindle drive: 13 kW feed range: X/Y/Z: m/min rapid traverse:: X/Y/Z: m/min feed power: X/Y/Z: 7/7/16 kN interface: ja total power requirement: 13 kW Weight approx.: 8,0 t dimension coolant device: ca. L:1,25 x B: 0,7 x H: 1,56 m dimension machine xH: 2,4 x 3,0 x 3,3 m Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: Compact filter/coolant high-pressure system Knoll Chip conveyor/scraper belt conveyor 300mm Tool changing unit with disk magazine for 24 tools Electronic handwheel Operation via Heidenhain control panel Accessories: AL plate 1200x600x45mm with holes Ø 15mm Klslovithzehcdw Dep *

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 36 mm Kjlhovzt Dyscdw Dslp throat 300 mm bore stroke 160 mm 4 speeds 100 - 1600 U/min column diameter 145 mm table-size 500 x 370 mm total power requirement 2,2 kW weight 440 kg dimensions 1200 x 800 x 2300 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 40 mm throat 340 mm bore stroke 170 mm Kljljv Rgx Nohcdw Dep table surface area 560 mm

Condition: good (used), Alzmetall AB4SJ Machine No. 12333 Infinitely variable speed with 2 gear stages Maximum drilling capacity in steel: 40 mm Spindle mount: MT 4 Spindle speeds: 65-1200 rpm Maximum quill stroke: 150 mm Feed rates: 0.09 / 0.16 / 0.28 mm/rev Table diameter: 560 mm Equipment: - Thread cutting device - Automatic feed - Machine light Kslhcsv N Eiwsdw Dolp - Drill chuck Price net, ex works

Condition: excellent (used), Year of construction: 1988, Alzmetall AB 30/R-1000 radial drilling machine with 3,0 kW motor Manufacturer: Alzmetall Type: AB 30/R-1000 Condition: used, very good Year of manufacture: 1988 Drilling capacity steel E335 (St 60) 40 mm Drilling capacity cast iron EN-GJL-200 50 mm Kolhov Imtuocdw Djlp Thread cutting (St60)* M 30 Thread cutting in cast iron (EN-GJL-200)* M 42 Short spindle MK 4 / MT 4 Stroke motor 0.75 kW 4 feeds 0.15-0.2-0.3-0.36 mm/rev Spindle stroke 160 mm* throat 1000 mm Drive Manual gearbox Motor: n = 1500 min-1 3.0 kw kW 12 Spindle speeds 56 / 80 / 112 / 160 / 224 315 / 450 / 630 / 900 / 1250 / 1800 / 2500 Standard equipment - Electromagnetic feed clutch with overload protection and electric handle cross switching - Clockwise rotation through contactor control - incl. motor protection switch for drive and lift motor - Base plate with T-slots - Protection class IP 54 Special equipment. - Machine light - Thread cutting device - Coolant system - Electrically controlled free-cutting device - Drilling depth fine adjustment and fixed stop - 2 x cube table 630 x 800 x 500 - Central clamping for drilling slide and boom mechanical and for column pneumatic

Condition: used, Year of construction: 1956, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm table surface area ø 500 mm spindle taper MT 5 spindle turning speed range 40 - 800 U/min feeds 0,1/0,14/0,2/0,28/0,4 mm/U column diameter 220 mm distance between table/spindle max. 670 mm distance spindle/base plate 1180 mm Kljlhcdsvh I U Tew Dop total power requirement 4 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant

Condition: good (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 5742, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile Kloljq U Swgehcdw Dop - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: excellent (used), Drilling capacity steel/GG: 32/45 mm Spindle mount: 4 MK Kslhcdwsv D E Hls Delp Thrust: 300 mm Table size: 445 x 445 mm Quill stroke: 160 mm Spindle speeds: 57 - 1340 rpm Feed rates: 0.1, 0.2, 0.3 mm Drive motor: 380 V, 1.4/2.2 kW Space required: 920 x 620 x 1880 mm Weight: approx. 440 kg

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm throat 345 mm Kljlhcdev Ehftew Dep bore stroke 200 mm table surface area 720 x 5 mm

Condition: used, Year of construction: 2004, machine/vehicle number: 33692, Lg.Nr. 24581 Technical data: Kjlsv E Hlxshcdw Djlp - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Long spindle MK 3 - Drilling spindle speeds continuously adjustable - Level 1 160 - 1125 rpm - Level 2 320 - 2250 rpm - Drilling spindle stroke 120 mm - Feeds 0.1 + 0.2 mm/rev - Throat 293 mm - Column diameter 115 mm - Table size 300 x 300 mm - Max. distance spindle - table 640 mm - Emergency stop button - Electric foot switch - Machine vice - Coolant system - Drive 400 V / 1.45 / 1.9 kW - Space requirement approx. W 500 x H 1850 x D 900 mm - Weight approx. 270 kg

Condition: new, ALZMETALL Alzstar 18-T/S, Manufacturer. Alzmetall Type: Alzstar 18-T/S Condition: New Klelhsv Imthocdw Dsp Drilling capacity in St 60: 18 mm, Thread cutting in St 60: M 12, Thread cutting in GG 20: M 14, Short spindle: MK 2, Spindle speed: 225-4,300 rpm, Spindle stroke: 80 mm, Throw: 190 mm, Column diameter: 65 mm, Machine table - usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance spindle-machine table min./max.: 75/357 mm, Machine base plate usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance Spindle base plate min./max.: 437/437 mm, Feed by hand, Machine table height adjustment: hand crank, Total power requirement: 0.37/0.55 kW, Machine height: 840 mm, Weight: 110 kg Standard equipment: Main switch with motor protection switch, lockable Reversing switch for clockwise and counterclockwise rotation Infinitely variable speed adjustment Protection class IP 54 Mushroom push button (latching) for EMERGENCY STOP Spindle protection with electrical protection Optional: - LED machine light - Under table - Drill chuck 1-13 or 3-16 Available now. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: used, bore capacity in steel (diameter) 45 mm throat 350 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 560 mm total power requirement 3,4 kW weight 950 kg dimensions 1200 x 800 x 2300 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch Kslhcsvuz Tvodw Delp * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: good (used), Year of construction: 1980, machine/vehicle number: 931, Offer 24475 Technical data: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 45 mm - Drill spindle mount MK 4 - Drill spindle stroke 160 mm - Throat depth 330 mm - Table with 2 T-slots 720 x 560 mm - Max. distance table - drill spindle approx. 800 mm - Feeds - Electromagnetic 0.1 - 0.2 - 0.3 mm/rev - With overload protection - Thread cutting device up to M 30 - AZ gear continuously variable with manual gear - Drill spindle speeds continuously variable 110 - 2900 rpm Klelhjv Dh Urocdw Dep - Drive 400 V 1.4 / 2.2 kW - Coolant device - Space requirement approx. W 1000 x H 2050 x D 1150 mm - Weight approx. 850 kg

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Kslhcov Imr Dedw Djlp Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 40,0 mm throat 293 mm Kslhcdwsvuz Nwo Dolp bore stroke 120 mm morse taper 3 MK table: 514 x 360 mm turning speeds 80 - 1.125 U/min engine output 1,0 / 1,6 kW column diameter 115 mm thread M24 ST60 thread M30 GG20 feed 0,10 + 0,20 mm/U weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Condition: new, Functionality: fully functional, Equipment: lighting, Alzmetall AB 40 iTRONIC 70-4000rpm pillar drill Condition: new Drilling capacity steel E335 (ST 60): 50 mm Thread cutting steel: E335 (ST 60): M 30 Spindle mount: MK 4 Spindle stroke: 160 mm Throw: 300 mm Column diameter: 145 mm Spindle speed L rpm: 70 – 4,000 Power: 1.8 / 2.9 KW Equipment: 7" TFT - LCD display with touch function Thread cutting device Infinitely variable speed setting Automatic speed control Spindle protection Three separate buttons for clockwise - counterclockwise - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 volts Protection class IP 54 Motor insulation class "F" (155°) Painting Electromagnetic feed overload protection Klelhcdsv Imrwew Dep Machine oil initial filling Equipment options: - Alzmetall option no. 12 LED machine light - Alzmetall option no. 20.4 Comfort grip switch - Alzmetall option no. 20.5 Foot switch - Alzmetall option no. 24 Coolant device A - Alzmetall option no. 37.3 Automatic drilling depth control - Alzmetall option no. 37.5 Technology computer - Alzmetall option no. 37.6 Maximum drilling depth display - Alzmetall option no. 38.1 Automatic spindle stop - Alzmetall option no. 38.2 Workpiece counter / spindle hour counter - Alzmetall option no. 50.6 Drilling depth fine adjustment 0.1mm

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New Drilling capacity steel 40 mm Thread cutting steel M24 Cast M30 Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height approx. 1840 mm Net weight approx. 270 kg Drive continuously variable Klslhsv Imqtecdw Dsp Motor 750/ 1500 rpm Power 1.0 / 1.6 kW Spindle speed rpm 80-1125 Additional equipment: - Reversing switch - Machine light LED - Thread cutting device - Coolant device B Available immediately from stock

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, ALZMETALL AX 3/SV pillar drilling machine (2017) Manufacturer: Alzmetall Type: AX 3/SV pillar drilling machine Year of manufacture: 2017 Condition: used Drilling capacity 40 mm Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm Kelhcov Imqmedw Delp T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height 1840 mm Net weight approx. 270 kg Drive continuously variable Spindle speed rpm 160-1125 rpm Standard equipment Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Digital speed display Protection class IP 54 Spindle protection with electrical fuse Special options: – Digital drilling depth display – Combination drilling table Scope of delivery: – Documentation – Drill chuck