Used Alzstar 40 for sale (22,636)

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,500 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 1,550 mm, total height: 3,200 mm, overall weight: 22,000 kg, controller manufacturer: FANUC, controller model: 16i-TA, number of axes: 9, This 9-axis Nakamura-Tome STW-40 was manufactured in 2000, featuring a max. turning diameter of 570 mm and a turning length up to 1550 mm. It boasts spindle speeds up to 3500 rpm and rapid traverse rates of 25 m/min on X-axes and 30 m/min on Z-axes. Ideal for complex machining tasks, it includes a 80-fold WZG magazine and a hinged belt chip conveyor. Contact us for more information about this machine. Additional equipment • 12000 rpm for upper WZG spindle with 11/7.5 kW drive power and 79/47 Nm torque • 80-fold WZG magazine • Automatic start-up and shut-down of the machine with warm-up program function • WZG breakage control with scanning flag for upper WZG spindle • 2 HD - Brinkmann pumps for upper WZG spindle and lower turret (pump capacity = 45 liters per minute) • Hinged belt chip conveyor with ejection to the right Machine Benefits Technical Machine Benefits • Max turning diameter upper wzg spindle: 570 mm // max turning diameter turret lower left and right: 400 mm • Standard turning diameter: 300 mm • Max turning length turret-bottom left and right: 500 mm • Max turning length upper wzg spindle: 1550 mm • Distance between spindle noses: 1900 mm • Distance between 2 3-jaw chucks: 1500 mm • Power requirement: total connected load of 160 kva • Air consumption: approximately 500 liters per minute • C1 + c2: 400 rpm • B-axis: 12. 5 r/min Extra Information Left / Right spindle: Driving power and torque: 22/15 kW Torque: 500/794 Nm Spindle speed: 30-3500 rpm Spindle nose: A1-8 Inside diameter in front bearing: 130 mm Spindle bore: 85 mm Max bar capacity: 71 mm Max chuck size: 315 mm C - Axis 3 axes simultaneous: X, Z, C Switch-on time: 0.5 sec Isdoyaqpuspfx Ag Ujht Rapid traverse speed: 400 rpm (144000 °/min) Feed rate: 1 - 4800 °/min Graduation accuracy: 0.011° (30 angular sec) Repeatability: ± 0.006° (± 20 angular sec) Spindle disk brake torque: 25 kgfm Milling and Bphr drive for upper WZG spindle: CAPTO-C6 Drive power: 15/11 kW from 800 rpm Motor speed: 60 to 6000 rpm Torque: WeldonS, 10, 12, 14, 16, 20, 25 Clamping fixtures attached tools: ER-25/ER-32 collet chuck Dimensions Machine Depth 6200 mm

Condition: good (used), Year of construction: 1978, Make: HAULICK ROOS Type: RVD 40 Year: 1978 Levelling straightner RASTER 12 180/19.150-1 New 1986 Ihedpfx Agjx S H Ilj Ust incl. Decoiler  incl. Feeder  Capacity Kg: 40000 Table Length:590mm Table Width: 500mm Hole in table:100mm Ram size: 590 x 380mm Stroke: 8 - 50mm Strokes: 30 - 300Min.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 450 mm, table length: 400 mm, spindle speed (max.): 14,000 rpm, spindle motor power: 18,900 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG MORI DMU 40 eVo was manufactured in 2015, featuring a robust HEIDENHAIN iTNC 530 control system, a new spindle, and a high-pressure cooling system. It offers X, Y, Z movements of 400 mm, 400 mm, and 375 mm respectively, with a spindle speed of 14000 1/MIN and a 30-position tool magazine. Consider the opportunity to buy this DMG MORI DMU 40 eVo vertical machining centre. Contact us for more information about this machine. • High-pressure cooling • 01/2025: a new spindle, linear guides, hydraulic and pneumatic distribution were installed. The rotary table hydraulics were also newly sealed. • Machine in very good condition! Technical Specification Ijdpfx Agjx D D Tyj Ueht Through-spindle Coolant Yes Taper Size SK 40

Condition: excellent (used), functionality: fully functional, power: 118.42 kW (161.01 HP), empty load weight: 11,600 kg, operating hours: 3,820 h, Equipment: rear view camera, Bergmann 3012R / Dumper / 40 km/h / Swivel Skip / 3,820 hours • Manufacturer: Bergmann • Model: 3012 R • Year of manufacture: 2016 • Operating hours: 3,820 h • Swivel skip • Engine: 4-cylinder Cummins turbo diesel engine • Hydraulic articulated steering: 37° left & right • Maximum speed: 40 km/h • Skip capacity: 6.3 m³ • Power: 119 kW / 161 hp • Engine speed: 2,200 rpm • Reversing camera • Camera • Air conditioning • Radio • Permissible total weight: 23,600 kg • Unladen weight: 11,600 kg • Payload: 12,000 kg • German machine • Immediately operational This offer is non-binding and subject to change without notice. - Subject to prior sale. - Errors and/or typographical mistakes excepted. Iedjx H Tdcepfx Ag Ujht - Sale according to our terms and conditions.

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Model: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: High-speed shredder shaft with counter comb Iedpfx Aex Uz Npeg Ujht Remarks: The machine is in fully functional condition. It has been inspected and tested at our facility in 28816 Stuhr. A video is available on our website or YouTube channel. Viewings can be arranged at any time by appointment. Upon request, we are also happy to carry out test runs with your own material for a handling fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We do not accept liability for the accuracy of this information or for any possible errors. Offers are subject to change, prior sale, and revocation at any time. Inspections are possible by arrangement. The sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M Technical specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-fold, polyester strapping, manual Throughput at bulk density of 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel exit is fully automatic and self-regulating. Inspections, including powered demonstrations, are possible at any time by prior arrangement. Upon request, we can also perform tests with your material for a nominal fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Ijdpfxox Uzxke Ag Uoht Please note: All technical data are based on manufacturer information. We do not assume any liability for the supplied information or possible errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Inspections are available by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: used, Year of construction: 2018, liter capacity 600 l Pressure of pump 2 / 3 / 40 bar control Schütze / Contactors total power requirement 11 kVA weight of the machine ca. 450 kg dimensions of the machine ca. 1,80 x 1,35 x 1,70 m Ihjdsx Urn Ajpfx Ag Uet Coolant System INTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ - Very good condition - Connected to DMU 50 3rd Edition - Controllable via contactors - Incl. paper belt filter - Number of pumps: 3 - Pump capacity: 0.63 kW, 2,750 rpm (50 Hz), 60 l/min, 20 m 2.89 kW, 3.75 HP, 2,880 rpm (50 Hz), 24/22-30/27 l/min 3.10 kW, 4.20 HP, 2,930 rpm (50 Hz), 160 l/min, 40 m

Condition: used, mileage: 122,196 km, Year of construction: 2017, operating hours: 8,592 h, Drivetrain Drive: Wheel Weights Empty weight: 26.000 kg Functional Lifting capacity: 40.000 kg Identification Serial number: 256086 Ihsdpfjw Uchxox Ag Ust Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Dunlop Carrier engine: - Upper engine: - Counterweight: 5500 Transport dimensions (LxWxH): 10.7x2.55x3.4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, operating hours: 15,936 h, Type of fuel: Electric Empty weight: 6.477 kg Dimensions (LxBxH): 290 x 125 x 318 cm Lifting capacity: 4.000 kg Lift height: 491 cm Fork dimensions: 1.200 x 1.150 mm - Year: 2007 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 516327000881 - Operating hours: 15936 - Lifting capacity: 4000kg Ijdsw Il E Tjpfx Ag Ujht - Lifting height: 4910mm - Overhead clearance: 3180mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 1150mm - Minimum fork width: 440mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Fork positioner - Options: Joystick, Full cabin, Work lights, Heating, Radio - Mast: Duplex - Drive: Electric - Capacity: 930Ah - Transport dimensions: 2900mm x 1250mm x 3180mm (l x w x h) - Transport weight [kg]: 6477kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2011, operating hours: 14,662 h, Type of fuel: Electric Empty weight: 6.477 kg Dimensions (LxBxH): 295 x 125 x 297 cm Lifting capacity: 4.000 kg Lift height: 448 cm Fork dimensions: 1.150 x 2.230 mm - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516327B00120 - Operating hours: 14662 - Lifting capacity: 4000kg - Lifting height: 4480mm - Overhead clearance: 2970mm - Free lift: 0mm - Fork length: 1150mm - Maximum fork width: 2230mm - Minimum fork width: 560mm - Number of wheels: 4 Wheels - Attachment: Fork positioner, Side-shift - Options: Work lights, Full cabin - Mast: Duplex - Drive: Electric - Brand/Type: Still - Battery voltage: 80V Ihjdpfowninmox Ag Uet - Transport dimensions: 2950mm x 1250mm x 2970mm (l x w x h) - Transport weight [kg]: 6477kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2003, operating hours: 17,048 h, Type of fuel: Diesel Empty weight: 6.081 kg Dimensions (LxBxH): 280 x 140 x 290 cm Lifting capacity: 4.000 kg Lift height: 440 cm Fork length: 1.300 mm - Year: 2003 - Documentation available: Yes - CE certificate present: No - Serial number: 517049104002 - Operating hours: 17048 - Lifting capacity: 4000kg Ijdpfjwnix Ejx Ag Ueht - Lifting height: 4400mm - Overhead clearance: 2900mm - Fork length: 1300mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Full cabin, Heating, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Deutz - Transport dimensions: 2800mm x 1400mm x 2900mm (l x w x h) - Transport weight [kg]: 6081kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Year of construction: 1991, operating hours: 19,888 h, condition: used, Price: On request Ihodpswydviofx Ag Uot - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 1844 - Operating hours: 19888 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,500 mm, total width: 1,000 mm, total length: 2,400 mm, Empty weight: 3.000 kg - Documentation available: No - CE certificate present: No - Drilling depth: 580mm - Spindle speed max.: 2120rpm - Table width: 550mm - Table length: 750mm Ihjdpfx Asxhcf Njg Ujt - Drilling capacity: 55mm - Spindle diameter: 70mm - Max. reach: 1200mm - Spindle speed min.: 47rpm - Transport dimensions: 2400mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, fuel type: electric, Weights Empty weight: 6.940 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.430 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 691 m Transport dimensions (LxWxH): 6,53x1,5x1,98 Production country: UK Additional information Please contact Christian Theißen for more information Units: 5218, 5220 Manufacturer: Genie Model: Z40/23N RJ Year of build: 2011 Condition: Used Data: Max. working height: 14,32 m Platform height: 12,32 m Max. reach: 6,91 m Platform lifting capacity: 227 kg Platform dimensions LxW: 1,17 x 0,76 m Ihsdjv Tii Ajpfx Ag Ujt Swivel range: 355° Max. climbing capacity: 30 % Total dimensions LxWxH: 6,53 x 1,50 x 1,98 m Ground clearance: 0,24 m Drive type: Battery Own weight: 6.940 kg Special features: Swivel work basket 180°, vertical cage arm 128°, white tires. Location: 41468 Neuss: immediately available

Year of construction: 1997, condition: ready for operation (used), This SCHRODER-FASTI FASTI 509-40-6 was manufactured in 1997. A Hydraulic shearing machine capable of handling aluminum up to 8mm, steel up to 6mm, and stainless steel up to 3mm. Minimum stop dimension is 15mm. A solid choice for shaping various metals, the SCHRODER-FASTI FASTI 509-40-6 machine we have for sale. Contact us for further details. Additional equipment • Front-operated motorised fence • Right-angled side stop 90° with tilt stop • 2 drop cam stops in T-slot guide • Table extensions with T-slots • Operating tool Machine Benefits Technical Machine Benefits • Minimum stop dimension: 15 mm • Construction: all-steel welded construction • Cutting technology: / double-edged, multi-part blades with 87° wedge angle / stepless cutting length adjustment / cutting gap adjustment (can be read to 1/100 mm using a dial gauge) / cutting line display with silhouette • Drive: hydraulic with oil filling • Control system: o electric control in accordance with din en 60204-1 / operating modes: single stroke, continuous stroke, partial stroke, jogging • Projection on the side stand: 50 mm • Dimensions (approx. ) for 509-40-6: a (total length): 4540 mm /b (table width): 1885 mm /c (table depth): 1645 mm/ d (cutting length): 4300 mm/ h (height of work surface): 2329 mm /k (total machine height): 1430 mm • Side stand projection: 50 mm (standard) • Foundation fastening: composite anchor hva m16x125 with mortar cartridges (drill Ø 18 mm) / concrete strength class min. B25 required. Ihedpfx Asx U T Hasg Ust • Cutting performance: shear angle: large angle = lower resistance, higher performance. / small angle = higher resistance, lower power // max. Sheet thickness: o dependent on material strength (see diagram in document). O recommended strip width: 12-15 × sheet thickness for low-torsion cuts Extra Information Machine still under power

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 2134 x 1016 x 762mm, Table 2134 x 914mm, table load 1814 kgs, Ihsdpfx Aex D Ulmeg Ust Spindle Speed 7500 rpm, Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, 24 Station ATC, coolant, low volt light, swarf auger,

Condition: used, axle configuration: 3 axles, first registration: 09/2006, color: other, Year of construction: 2006, Empty weight: 4.780 kg Ihjdpfexbr Rzsx Ag Uot Axle 1: left 6 mm right 6 mm Axle 2: left 10 mm right10 mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 12/1992, color: other, Year of construction: 1992, Empty weight: 4.930 kg Isdpfx Aswglvdeg Uoht Axle 1: left 7 mm right 5 mm Axle 2: left 6 mm right 5 mm Axle 3: left 9 mm right 7 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 10/1994, color: other, Year of construction: 1994, Empty weight: 6.630 kg Ijdpfx Agowglvwo Ueht Axle 1: left 4 mm right 4 mm Axle 2: left 5 mm right 4 mm Axle 3: left 5 mm right 4 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 05/1999, color: other, Year of construction: 1999, Empty weight: 5.630 kg Axle 1: left 7 mm right 8 mm Axle 2: left 7 mm right 9 mm Axle 3: left 9 mm right 10 mm We have the possibility to stack trailers! Isdpfx Aowaxm Nog Ujht

Condition: used, axle configuration: 3 axles, first registration: 03/2005, color: other, Year of construction: 2005, Empty weight: 4.900 kg Axle 1: left 10 mm right 6 mm Axle 2: left 10 mm right 6 mm Ihedpfx Aexbhb Aeg Ust Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 08/2003, color: other, Year of construction: 2003, Empty weight: 5.600 kg Axle 1: left 8 mm right 8 mm Ijdpfsx Ank Hox Ag Ujht Axle 2: left 10 mm right 10 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 03/2007, color: other, Year of construction: 2007, Empty weight: 5.250 kg Axle 1: left 9 mm right 9 mm Axle 2: left 12 mm righ12 mm Axle 3: left 12 mm right 10mm Ihedpfx Aswz Ekdsg Ujt We have the possibility to stack trailers!