Used Alzmetall Alzstar 30 S for sale (129)

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 50.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm threading 24 in ST M threading 30 in GG M turning speeds 100 - 1.800 U/min feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm total power requirement 0.6 / 1.8 kW Gijdpfxoxaa R He Admjl weight 470 kg height of the machine 1865 m Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Condition: ready for operation (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1441, spindle speed (max.): 3,000 rpm, spindle speed (min.): 200 rpm, total height: 1,500 mm, total width: 560 mm, total length: 800 mm, table width: 240 mm, table length: 250 mm, overall weight: 250 kg, With 2 grooves, including frequency converter for stepless speed use. Gsdev Iqqdepfx Admjil

Condition: new, ALZMETALL Alztronic 16 table drilling machine Condition: new Availability: Immediately from the Offenburg warehouse Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thrust 190 mm Column diameter 65 mm Manual feed Drill head height adjustment via handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional special equipment: - Digital drilling depth indicator - Machine light Optional accessories: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table Gjdpfx Asxd Tugedmoil

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 5742, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm Gijdpsq U Swgefx Admjl - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: used, Year of construction: 2007, machine/vehicle number: 36585, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, table load: 1,000 kg, overall weight: 15,500 kg, input current: 55 A, input frequency: 50 Hz, 2007 Alzmetall CNC milling machine (with Kuka robot) Gijdpfswpu D Asx Admjl The machine has been dismantled and is ready for loading. The card has been removed!

Condition: used, bore capacity in steel (diameter) 40 mm throat 325 mm bore stroke 170 mm Gisdpewn T A Ujfx Admel table surface area 730 x 590 mm

Condition: new, bore capacity in steel (diameter) 55.0 mm threading M 30 / M 42 throat 300 mm bore stroke 140 mm turning speeds 70 - 1200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.10 + 0.30 mm/U distance spindle /table 150 / 735 mm weight 380 kg Machine height 1850 mm Furnishing : - automatic feed - Feed device 0.1 + 0.3 mm / rev - stepless speed adjustment - digital speed display Gedpfsxaa E Rox Admoil - Feed overload protection - Spindle protection with electr. validation including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 (Thread cutting with stop) - LED machine light pos. 12.

Condition: used, Year of construction: 2001, bore capacity in steel (diameter) 32 mm throat 322 mm bore stroke 180 mm Gijdpfxju Rt Ius Admol table-size 500 x 370 mm spindle taper MT 4 number of spindle speeds 55- 5000 UpM Control Software Spezial total power requirement 3 kW weight of the machine ca. 0,52 t dimensions of the machine ca. 1 x 1 x 2,35 m column type drilling machine with additional turret head ARBO 20. Machine comes with spare parts.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Godjxd Ttpspfx Admeil Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Year of construction: 1984, condition: ready for operation (used), drilling capacity steel/GG: 18/23 mm spindle taper: 2 MK arm length: 250 mm table size: 250 x 370 mm spindle turning speed range: 400 - 5000 rpm Gsdpfx Aok Tzu Rjdmoil engine: 0,48/0,6 kW space needed: 750 x 500 x 1670 mm weight: 130 kg

Condition: excellent (used), Year of construction: 1979, Drilling capacity 32 mm Spindle taper MT 3 Throat 290 mm Quill stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Spindle speed 55 - 1450 rpm, stepless Motor power 0.9 and 1.3 kW, pole-switchable Power connection 380 Volt, 50 Hz Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless via variator Table height adjustment via handwheel Gsdpfjw H Namox Admoil Machine lamp Quick-release drill chuck 1 to 13 mm Required space L x W x H 1200 x 650 x 1900 mm Weight 400 kg very good condition

Condition: used, Year of construction: 1987, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm taper MK 5 MK table-size 660 mm feeds 0,1-0,14-0,2-0,28-0,4 . mm/U turning speeds 40 - 800 U/min Godpow Tdx Nsfx Admsil total power requirement 4,0 KW weight of the machine ca. 1,4 t dimensions 1,2 x 0,8 x 2,59 m Pillar drill with: - Feed - Left/right rotation - Variable spindle speed - Coolant pump

Condition: new, bore capacity in steel (diameter) 40.0 mm threading M 24 throat 293 mm bore stroke 120 mm morse taper 3 Kurzspindel MK table: 515 x 360 mm turning speeds 80 - 1125 U/min feed 0.10 + 0.20 mm/U column diameter 115 mm distance spindle /table 117 / 701 mm total power requirement 1.0 / 1.6 kW weight 270 kg height of the machine 1840 mm Furnishing: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Gijdpfexaar Rsx Admel - Operating instructions in German including special equipment: - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "B" pos. 25.

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 30/35 mm throat 300 mm bore stroke 140 mm Gisdpfx Aeu Rt Hqodmel table-size 700 x 500 mm spindle taper MT 3 number of spindle speeds 65 - 1750 UpM total power requirement 1,7 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1 x 1 x 2 m Pillar drilling machine.

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop Gijdpjxd Trlsfx Admol - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Year of construction: 1987, condition: used, 1 pillar drilling machine ALZMETALL AX 3SV, serial no. 5739, year of manufacture 1987 Giodpfsi Apu Tox Admel

Year of construction: 1978, condition: used, number of spindles 3 bore capacity in steel (diameter) 40 mm Gijdpfxsd Ih S Sj Admsl bore stroke 180 mm weight of the machine ca. 2,3 t

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm Gedpfjv Ehftox Admoil throat 345 mm bore stroke 200 mm table surface area 720 x 5 mm

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 80 - 1125 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection Giodexabyispfx Admsl - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Condition: used, machine/vehicle number: 8580, 3 automatic feeds 01, 02 -0.3mm/rev Table clamping surface: approx. 500 x 370 mm Table height adjustable via rack and pinion Machining base plate approx. 350 x 320 mm Gjdpfxswtdmue Admeil With motor: 1.5 kW, 1415 rpm, 380/220V

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New Drilling capacity steel 40 mm Thread cutting steel M24 Cast M30 Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height approx. 1840 mm Net weight approx. 270 kg Drive continuously variable Motor 750/ 1500 rpm Power 1.0 / 1.6 kW Spindle speed rpm 80-1125 Additional equipment: - Reversing switch - Machine light LED Gsdpfjxd Trfox Admoil - Thread cutting device - Coolant device B Available immediately from stock

Condition: used, Year of construction: 1975, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 65 - 1750 U/min table-size 425 x 500 mm column diameter 155 mm feed 0.1-0.2-0.3 m/min spindle taper MT 4 MK engine output 0.9 / 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Machine from a vocational school good / well-maintained condition (!!) Equipment: - robust motor-driven pillar drill with VARIO drive (V-belt) - electro-automatic spindle feed - pole-changing motor - stepless speed adjustment (VARIO drive) - adjustable drilling depth stop - machine table with 2x T-slots * height adjustable via hand crank Gisdpfoxabuaox Admol - 1x used machine vice - machined base plate - coolant device - connection cable + connection plug - original operating instructions

Condition: new, Year of construction: 2023, Alzmetall Alztronic i16 table drilling machine 5" touch display Condition: new Call us and ask us about special discounts or send us your request by email with your contact information and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and uniform operator guidance using pictograms - Manual input of spindle speed - target value - Speed display - actual value - Integrated drilling depth display with touch zero point transfer (drilling start) - Virtual drilling depth scale in the display - Machine status displays and warnings in the display (safety)• Main switch, lockable - Right and left rotation through contactor control - Control voltage 24 V - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Spindle braking function - ALZTRONIC only (safety) - Adjustable display timeout Standard Equipment: -AC motor 230 V, 50 Hz -Infinitely variable speed adjustment -Reversing switch for right-left rotation -Spindle protection with electrical protection -On/off button with lockable emergency stop flap -Connection plug, cable length 3m -Paint: structural paint light gray RAL 7035, anthracite RAL 7016, white aluminum RAL 9006 Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thread 190 mm Column diameter 65 mm Manual feed Drill head height adjustment by handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional: - Röhm Supra drill chuck 1-13mm or 3-16mm Gsdpfxoxd Tqbj Admjil - Alzmetall under-table For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: new, bore capacity in steel (diameter) 55.0 mm throat 300 mm bore stroke 140 mm morse taper 4 MK table: 615 x 430 mm turning speeds 70 - 1200 U/min column diameter 145 mm thread M 30 ST60 thread M 36 GG20 feed 0.10 + 0.30 mm/U distance spindle /table 150 / 735 mm engine output 1.8 / 2.9 kW weight 380 kg Machine height 1850 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base Gisdpfsxabn Tsx Admsl

Condition: new, functionality: fully functional, Equipment: lighting, Alzmetall AB 40 iTRONIC 70-4000rpm pillar drill Condition: new Drilling capacity steel E335 (ST 60): 50 mm Thread cutting steel: E335 (ST 60): M 30 Gedpfxoxd Tp De Admoil Spindle mount: MK 4 Spindle stroke: 160 mm Throw: 300 mm Column diameter: 145 mm Spindle speed L rpm: 70 – 4,000 Power: 1.8 / 2.9 KW Equipment: 7" TFT - LCD display with touch function Thread cutting device Infinitely variable speed setting Automatic speed control Spindle protection Three separate buttons for clockwise - counterclockwise - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 volts Protection class IP 54 Motor insulation class "F" (155°) Painting Electromagnetic feed overload protection Machine oil initial filling Equipment options: - Alzmetall option no. 12 LED machine light - Alzmetall option no. 20.4 Comfort grip switch - Alzmetall option no. 20.5 Foot switch - Alzmetall option no. 24 Coolant device A - Alzmetall option no. 37.3 Automatic drilling depth control - Alzmetall option no. 37.5 Technology computer - Alzmetall option no. 37.6 Maximum drilling depth display - Alzmetall option no. 38.1 Automatic spindle stop - Alzmetall option no. 38.2 Workpiece counter / spindle hour counter - Alzmetall option no. 50.6 Drilling depth fine adjustment 0.1mm