Used Elumatec As 70 for sale (122)

Condition: good (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, Equipment: rotational speed infinitely variable, All machining operations such as milling, drilling, and thread cutting are performed on the stationary profile, thereby protecting the profile surface. Improved work results through the use of intelligent control technology. Rapid positioning of the machining unit at speeds of up to 60 m/min thanks to dynamic servo drives. Thread cutting without compensation chuck. Automatic clamp detection and positioning. Automatic tool magazine with four tool compartments (without tools). Angle head without tools. Modern 3-axis control. Ergonomic operation thanks to the use of a modern inclined bed. No need for axis referencing due to systems based on absolute encoders. Pedpfx Aox Dzftsa Esha Collision avoidance through automatic clamp detection and positioning. The Power Torque milling motor with closed-loop speed control ensures short spindle start-up and stop times. Certified drive-integrated safety functions. Low power consumption through the use of intelligent control technology. Higher energy efficiency due to recirculative coupling of the axis drives. Uninterruptible power supply (UPS). Windows operating system. 15.6" panel PC, i3 processor, USB and network connections. Simple and convenient program entry with eluCam at the control panel, even during machining. Online remote maintenance.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Pedpfx Ajxz Sknoa Eeha Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Shipping on demand

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Phjdpfxewgmyqs Aa Esa Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Depth gauge Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Panel PC 21.6", i7 processor Note holder Sound-absorbing hood Chip disposal using chip trays

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine -Manufacturer: Elu, copy milling machine type AS 70 -Travel path: manual X//Y 230/80 mm -Stop depths: see photos -Workpiece clamping: pneumatic -Coolant device -Dimensions: 600/520/H1280 mm Podpfxjp Swvke Aa Ejha -Weight: 111 kg with pallet

Condition: used, Year of construction: 1997, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine -Manufacturer: elumatec, 1-SPINDLE COPY MILLING MACHINE Type AS 70/44 -Spindle speed: 12000 rpm Pedetvhr Sepfx Aa Esha -Stop depths: see photos -Workpiece clamping: pneumatic -Dimensions: Milling machine 580/500/H1510 mm roller blocks 1050/210/H900 mm -Weight: 149 kg with pallet

Condition: ready for operation (used), functionality: fully functional, Sale of a Complete Production Line for Aluminium Frames & Insect Screens Ideal for Window Manufacturers, Trade Businesses & Producers For sale is a fully coordinated set of machines and workshop equipment for the production of: - Aluminium frames for wood-aluminium windows - Renovation aluminium frames - Insect screen tension frames This equipment is suitable both for established companies aiming to expand their manufacturing depth and for start-ups or newcomers looking to acquire a ready-to-operate production line. Special Features: - Preferably sold as a complete package - Partial sale of individual machines possible - Field-proven, functionally coordinated machinery - Independent in-house production possible - Significant cost savings compared to new purchases Training, Instruction & Know-how Transfer: On request, I offer the buyer personal training and onboarding. The goal is to share expertise accumulated over decades. Training can include: - Introduction to the complete production process - Optimal machine settings - Efficient manufacturing - Avoidance of common errors - Assistance during commissioning Buyer Benefits: - Immediate start of production - Reduction of dependency on suppliers - Expansion of product portfolio - High value creation - Know-how transfer included Phedpfx Aox Nbnhea Esa Reason for Sale: Sale is due to age and a career change. Further Information: - List of machines and details upon request - Scope of training by arrangement - Collection by appointment If interested, please get in touch. I am open to all inquiries and arrangements.

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using lateral stops or templates at a 1:1 ratio Pneumatic copy pin, two-stage, for two different cutter diameters The patented suspension of the copying lever ensures precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via spindle lock Pjdpfxoxqihij Aa Eoha Pneumatic material clamping device Metering spray unit Options: Copy templates milled for standard handle holes and PZ milling Copy pin Collet chuck Stop system Material clamping device with 2 clamping cylinders Milling cutter 8 mm Availability: short-term Location: Flörsheim

Condition: used, Transport 300 Eur Phedpewna Rxefx Aa Eea

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications Phsdpfxexyupkj Aa Eja 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw

Condition: used, Year of construction: 2000, The control cabinet cable has been cut off, therefore the price is reduced. Phsdpfxex N R U Ds Aa Eea

Year of construction: 1996, condition: used, Max. saw blade diameter: 280 mm Pneumatic material feed via two-hand operation minimum quantity spraying Phjdpfx Aaox Ivqze Eea Bevel cuts possible on both sides with detent points Roller conveyor and length stops on request

Condition: excellent (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 104000031, The machine is in very good condition. Phjdex I Rtqepfx Aa Eea

Condition: used, Year of construction: 2019, functionality: unexamined, Auction: Plant closure Roschmann, Gersthofen (Augsburg) Bid now – Sale to the highest bidder. Lot 2910010: Lot consisting of 1 used single mitre saw with conveyor belt in good condition. Shows minor signs of use and is suitable for precision cutting operations with pneumatic clamping and automatic feed assistance. Mitre saw: Elumatec TS161/21, year of manufacture 2019. Motor power: 1100 W, 4100 rpm. Feed system: Ruchser RU-LAP3 conveyor unit, 1.5 kW, 50 kg/m load capacity. Electrification: 400 V (saw), 230 V (RU), 50/60 Hz, 3.0 A + 4.5 A. Pneumatics: 7 bar air pressure, pneumatic clamping. Accessories: Integrated control panel, conveyor frame, length stop. Phedpfx Aaox N Nigs Eoa

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm, electro-motorized movement of the right unit, digital measurement display, saw units swiveling and tiltable. Storage location: customer Psdpjw Sadrofx Aa Esha

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Phedpfjuiy Nyjx Aa Esa Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: like new (used), Year of construction: 2021, functionality: fully functional, saw blade diameter: 280 mm, total length: 7,030 mm, type of input current: three-phase, rotational speed (min.): 4,100 rpm, rotational speed (max.): 4,100 rpm, saw blade speed: 4,100 rpm, input voltage: 400 V, saw drive: 1,100 W, compressed air connection: 7 bar, pressure: 7 bar, operating pressure: 7 bar, Equipment: documentation/manual, ❇️ elumatec TS 161/21 Aluminium Crosscut Saw with Electronic Length Stop & Roller Conveyor For sale is an elumatec TS 161/21 aluminium crosscut saw, year of manufacture 2021, in excellent, well-maintained, and fully functional condition. The machine is equipped with an electronic length stop from Hecht Electronic AG as well as an extended roller conveyor system, making it ideal for precise series and repeat cuts of aluminium profiles (e.g. for window, façade, and metal construction). ⸻ Phedox N E Apspfx Aa Eoa ❇️ Technical Specifications (as per nameplate): • Model: elumatec TS 161/21 • Year: 01 / 2021 • Voltage: 3/PEN / 400 V • Frequency: 50 Hz • Power: 1.100 W • Current: 3.0 A • Speed: 4,100 rpm • Operating pressure: 7 bar • Country of manufacture: Germany ⸻ ❇️ Features & Highlights: • Pneumatic material clamps • Electronic length stop (Hecht Electronic AG) • Digital control/display • Long roller conveyor (infeed & outfeed) • Heavy-duty machine stand • Protective hood & safety functions • Ideal for precise repeat cuts • Very smooth and clean operation ⸻ ❇️ Condition & Notes: • Machine is fully operational and well maintained • No known technical defects ⸻ ❇️ Price: €10,900 net plus VAT. On-site inspection is expressly encouraged! ⸻ ℹ️ Further Information: • Invoice with VAT shown can be issued • Location: 72229 Rohrdorf • Loading by overhead crane available on site • Delivery possible at buyer’s expense • Viewing by appointment is expressly encouraged ⸻ ⚠️ I am also offering further accessories for workshops and metalworking in my other listings. ‼️ Please also have a look at my other items. It’s worth it!

Condition: used, Year of construction: 2003, Simultaneous processing of external contours as well as the weld seams on the top and bottom Two milling slots for freely configurable milling sets Pjdpfx Aasx If Szo Esha With sprung nut blade optimal groove pattern for convex and concave profile surfaces Adjustable feed-in also pulls heavy and tall profile elements (e.g. front doors) precisely and safely No twisting of the profiles due to horizontal and vertical clamping Milling cutter diameter up to 260 mm for profiles with extreme build depth possible Series purge device, thus no inaccuracies due to securing chips Versatile through individually switchable slot cutters and milling cutters as well as individual and quickly exchangeable cutter combinations Outer dimension min. frame size 290 x 290 mm Inner dimension min. frame size 160 x 160 mm Profile height max. 200 mm Profile height min. 25 mm End mill diameter max. 260 mm Milling spindle speed 3,200 1/min

Condition: used, Year of construction: 2007, Technical data: Speed: 2800 1/min Podpsrwlwvofx Aa Esha Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Year of construction: 2008, condition: used, functionality: unexamined, Auction: Plant Closure Roschmann, Gersthofen (Augsburg) Place your bid now – Sale to the highest bidder. Lot 2910009: Complete industrial-grade double miter saw system for precise cutting of aluminium or PVC profiles, featuring integrated dust extraction. This robust and reliable setup is ideally suited for use in window, façade, or profile fabrication, where accurate angle cuts and clean operation are essential. Technical Specifications: Double Miter Saw Phedpfx Aox N Niaja Eja - Manufacturer: Elumatec - Model: DG 244/10 - Power supply: 3~PEN / 400 V / 50 Hz - Motor output: 3.5 kW - Compressed air requirement: 7 bar - Speed: 2,800 rpm - Year of manufacture: 2008 Dust Extraction Unit - Manufacturer: Schuko (H. Schulte-Sudhoff GmbH & Co. KG) - Model: DG 244 - Airflow rate: 1,870 m³/h - Motor output: 2.2 kW - Suction pressure: 1,050 Pa - Power supply: 230/400 V, 50 Hz

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Psdpfx Aaouiy Nge Eoha Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: used, Year of construction: 2002, The handle olive drilling unit with three-spindle drilling head and automatic feed allows operations in 2 levels without material tension. The unit is height-adjustable. Pedox If Ayopfx Aa Esha Speed: 12,000 revolutions per minute Pneumatic material clamping Minimum quantity spray device Milling area horizontal to stop: 300 x 120 mm Clamp range of profiles with drilling unit stroke 150 x 110 mm up to 400 mm adjustable Hub: 105 mm Weight: approx. 200 kg

Year of construction: 2006, condition: used, For aluminum and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Phjdswucd Iopfx Aa Eja Max. profile height: 150 mm Pneumatic material clamps Manual feed minimum quantity spraying Weight: approx. 200 kg

Year of construction: 2002, condition: used, For aluminum and PVC profiles Psdpjx E Airefx Aa Eeha Max. Fräserdurchmesser: 250 mm Max. milling length: 250 mm Max. milling depth: 95 mm Max. Profilhöhe: 115 mm Hub: 350 mm Pneumatic material clamps Manual feed minimum quantity spraying Weight: approx. 200 kg

Year of construction: 2003, condition: used, Max. sawing length: 6,000 mm Smallest cutting length: 335 mm Phsdsx Ecgnjpfx Aa Eea Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Moving roller conveyor Minimum quantity spray device label printers

Year of construction: 2006, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Phjdpsx Ecfkjfx Aa Eja Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Stepless speed control up to 21,000 rpm Manual control device Minimal quantity spray Automatic tool changer with magazine (4 slots plus angle head) Spanner measurement and clamp displacement 4 pneumatic material clamps Light barrier Weight: approx. 2,000 kg