Used Advertising Material for sale (17,118)

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Lodpfx Aajif Sg Se Ejhr Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, functionality: fully functional, empty load weight: 1,000 kg, loading space length: 5,940 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Used 12 m² material container made of galvanized trapezoidal sheet metal Large material storage container, 6 x 2 meters, with eyebolts. Long service life due to fully galvanized construction. Spot-welded and sealed, providing high corrosion protection. Particularly burglar-proof, doors cannot be forced open. Internal width: 5940 mm • Internal depth: 2000 mm • Internal height: 2000 mm • Exterior wall and roof construction: Galvanized trapezoidal sheet metal • Interior wall construction: Galvanized trapezoidal sheet metal • Interior ceiling construction: Galvanized trapezoidal sheet metal • Floor construction: Wooden flooring made of tongue-and-groove planed boards • Roof drainage: Via longitudinal gutters • Door design: Double-leaf doors Lhsdpewl Dqksfx Aa Eer

Condition: excellent (used), Recyclables depot lockable  The article is a recyclable material depot. The depot is equipped with a lowering gate as a locking mechanism and thus offers secure protection for valuable goods and merchandise. Dimensions: 4.25 metres wide, 1.35 metres deep and 2.85 metres high Manufacturer locking mechanism: Warema Condition: used  Complete factory locking system, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Lhsdpfxsh I D Aue Aa Esr Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Lhsdpfx Aaexk Tg Nj Ejr Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Year of construction: 2023, condition: good (used), Top condition – with warranty Special equipment available on request. Price: On request The ideal attachment for wheel loaders to evenly distribute material such as concrete, asphalt, bulk goods (sand, grit, gravel, topsoil, salt, etc.) via a conveyor belt. Possible areas of application include road construction, pipeline and sports field construction, as well as municipal use. Lhedpsw Hycrsfx Aa Eor Cost-effective alternative to a berm paving machine. General description (including photos and application videos) and technical data for the product can be found on our Optimas website. The photos are for illustrative purposes and do not show the actual products for sale. If you are interested, please feel free to contact us at any time by phone or email.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Tipping skip with drive and auger for self-collection Lodpfxjr Iyb Nj Aa Eehr

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake Lodpfx Aohx R Etea Eshr - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. Lhjdpfx Aasph U Ane Eer The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Lodpfx Asg Sxmfoa Eehr Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, New: Yes Colour: Blue Lodpfxox D A E Io Aa Eehr Field of application: Mining Empty weight: 35.000 kg Dimensions (LxBxH): 1400 x 400 x 250 cm Runnning hours: 16777215 mh Volume of the tank: 30 m^3 Capacity: 350 Productivity: 300 tph (1400 x 14000) Double Washing Screw: (With SKF AUTOMATIC LUBRICATION) Water Consumption : Minimum 100 Ton/Hour – Maximum150 Ton/Hour Capacity 300-350tph Screw Dimensions Ø1400 x 14.000 mm Motor :2x45/55 KW Drive System :Chained Drive System Roller : SKF Abbrasive : 6 mm on iron plate 10 mm Rubber Coated Discharge : Ø200 mm Pipe Discharge Channel : 2 PCS 120 mm 150 mm 5mm U Bend Platform : Ladder for Pre Maintenance and Safety Weight 35000kg Paint PPG or Jotun 2 Layer Paint on1 layer Epoxy Lining RPM 25 Degree 15 Dimensions 4400x15500x2600mm Housing Bearing Water Resistance SKF-FAG BEARING 6 PCS

Condition: used, Year of construction: 2018, No. 3085 Chipper / material shredder WEIMA WLK 800 used, year of construction 08/2018 approx. 1200 operating hours For various materials such as hard plastics, paper, foils, filaments, wood or textiles. Feed opening 800 x 1450 mm F rotor Lodpjkzkwmofx Aa Eohr Rotor diameter 260 mm Rotor speed approx. 100 rpm Motor power 30 kW knife screwed incl. various spare knives and sieves Transport dimensions approx. 3400 x 1750 x 2100 mm LWH Weight approx. 2500 kg Sales on behalf of customers, from the Hesse location In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place in the ACTUAL condition Technical information, description of condition, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is "bought as seen". Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Terms of delivery: ex warehouse or location

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 133106 & 133312, New material feeder, system Pailfeed PF803, year of manufacture 2024, unused, including control unit DS 503. Designed for reliable, clean, and bubble-free conveying of medium- to high-viscosity single-component materials from a container. Dispense module not included! Two units available. Please specify the desired quantity with your offer. Optional accessories such as UV-curing devices are offered separately. Supplier: Dr. Hönle AG. --- Please quote your price offer. Sale only within Europe (EU), including Turkey, Great Britain, and Switzerland. --- Technical specifications can be found in the handout. Supplied without packaging; all warranty rights are excluded. Should you wish to dismantle the system yourself, please note this in your offer. We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations. Lhjdpfx Aajw Dd Rzs Ejr

Condition: used, Material clamp, material gripper, load clamp carrying clamp, lifting clamp, block tongs Manufacturer: NORDGREIF Type 7548 Year of construction: 1997 Ledpfxodz Spne Aa Eohr Load capacity: 500 kg Gripping width: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective coating on the gripping surfaces - for crane operation - with CE-marking Own weight: 50 kg sound condition

Condition: like new (used), Year of construction: 2023, operating hours: 1,000 h, functionality: fully functional, Single layer textile cutter Cutting width: 1600 mm Cutting length: 2500 mm Lhjdpow Invujfx Aa Ejr The machine was in use for one and a half years but not every day. It is almost like new! Reason for sale: Backpack factory closure.

Condition: refurbished (used), functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, empty load weight: 53,050 kg, Year of construction: 2012, operating hours: 13,200 h, machine/vehicle number: 835.5.1445, Very good overall condition! The engine and wear parts were replaced in 2024 - total overhaul cost approx. €70,000 Lhsdpfsv Ran Dsx Aa Eor No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Unladen weight: 53,050 kg Fuel type: Diesel MACHINE DETAILS Total operating hours: approx. 13,200 h Engine running time: approx. 160 h (since replacement) EQUIPMENT - Tracked chassis

Condition: used, Colour: Red Field of application: Mining Ljdpfox D A Dwox Aa Eehr Take your material processing capabilities to the next level with Polygonmach’s Fine Material Washer. Known for their engineering excellence and innovative solutions, Polygonmach has yet again pushed the boundaries with their advanced Spiral Classificator and Screw Washer. Designed for maximum efficiency and performance, this system offers an unmatched processing solution for a variety of materials. The Polygonmach Fine Material Washer, also known as Spiral Classificator or Screw Washer, is a powerful tool for sand classification and dewatering duties. It is specially designed for washing, classifying, and dewatering fine material as well as for scrubbing and expelling clays and silts from raw materials. The design offers a high level of cleaning, improving the quality of your end product. While it is mainly used for cleaning and handling of sand and gravel, it also works with many other minerals. When you need the highest level of cleaning, this washer is your go-to solution. The Polygonmach Fine Material Washer's superior design ensures optimal performance. It features replaceable, wear-resistant paddles that enhance the machine’s longevity. The system also comes with an adjustable weir and water volume to meet your specific washing needs. To achieve the desired results, the Polygonmach Fine Material Washer is equipped with a heavy-duty design and construction. It is highly efficient, delivering precision, and accuracy in its operations. Despite its robust construction, it is easy to maintain and has low operational costs.

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115 autofocus Cooler Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting software Low pressure gas alarm gas pressure monitor and SW control Voltage stabilizer 48-72 KVA Laser class 4 enclosure Heavy duty machine base. High power servo motors. Intelligent cutting control system, easy operation Fast tacking, supported by segment and step tacking technology. Specialized air duct with oversized caliber, makes the smoke exhaust smooth. Completely enclosed construction European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. Speed 120 m/min Sheet loading 1500Kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 machine power 32-48 kW Lhodjci Ik Sopfx Aa Eor Voltage 380V/50Hz Delivery time 5 months (construction time + transport) delivery to customer's yard 3.500€ Installation and training 8.850 € Industry 4.0 software 9.500 € FILTERCUBE 2H, 4,0 kW, 40 m² 10.500,- € The Filtercube series is an extraction system equipped with filter cartridges, in the field of smoke filtration and dusts.

Condition: excellent (used), functionality: fully functional, Offered are 20 bulk goods buckets/transport buckets. Blasted and repainted. Lhjdpfx Aeq Hd Nxja Eor Dimensions: 1.26 m x 1.26 m x 1.46 m (LxWxH) With adjustable spout, closes watertight, Capacity: 1.00 m³ depending on density 1 - 1.3 tons.

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm Lhsdpfehwn Tijx Aa Esr - solid steel plate - milled surface - 4 bolted lifting lugs - plate equipped with some symmetrical holes Net weight approx. 2380 kg

Year of construction: 2015, condition: excellent (used), The drum follower plate system A280 has the proven Scheugenpflug double-piston pump. This pump only comes into contact with material on one side, while a flushing liquid on the rear ensures that abrasive fillers do not get caught on the seals. With this system, highly abrasive, pasty media can be conveyed continuously and reliably with an unrivaled service life. 2 Component Follower Plate System. Lhjdpfxsif Ug Ej Aa Eer

Condition: used, Year of construction: 2018, functionality: unexamined, machine/vehicle number: 45940-30, overall weight: 2,150 kg, Large conveyor belt for sale Lhedsv N I E Iopfx Aa Eor Weight: 2150 kg

Year of construction: 2009, condition: defective spare-parts repository (used), Sale as spare parts warehouse Ljdpfx Asqgb H Dea Eehr

Year of construction: 2005, condition: ready for operation (used), Zig-zag fine material separator Cross section: approx. 500 / 300 mm For the separation of fines from the regrind Equipment: Lhjdpfsf Rlc Dox Aa Eor 2x rotary valve type NU 250 With Vulkollan seal, each 0.37 kW, 1x material conveyor blower type MFT 75/500, 11 kW

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: Lhedpfx Aajw S Ewqe Ejr • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Condition: used, Decoiler, pivoting decoiler GSW SCHWABE Type LHD 50/800 Sond Double decoiler, double mandrel decoiler Factory No.: 5775 Year of manufacture: approx. 1995 Coil weight: 50 kg per side Coil width: max. 130 mm Coil inner diameter: 155 - 445 mm Ljdpfx Ajhubgwsa Eehr Coil outer diameter: 850 mm Support discs: Ø 850 mm Start rings: Ø 850 mm Distance from center of mandrel shaft to base: 980 mm - Manual 180° rotatable decoiler assembly with locking positions - Central expansion via rotation lever adjustment - Mechanical disc brake, adjustable brake shoes with knurled screw Required space (L x W x H): 1000 x 850 x 1500 mm Weight: 190 kg Good condition