Used Advertising Material for sale (16,709)

Condition: used, SPECTRO SPECTRO MAXx / LMM04 Description: For sale is an optical emission spectrometer SPECTRO MAXx, designed for professional metal and alloy analysis. The instrument is suitable for rapid and precise determination of the chemical composition of metals such as steel, cast iron, and various non-ferrous alloys. This is a proven industrial device, commonly used in foundries, laboratories, and for quality assurance. Device and Maintenance Information: - The device has been covered by a maintenance contract and maintained professionally on a regular basis. - Several programs have been calibrated annually. - Last maintenance: 22.12.2023 - Operates without a vacuum pump – flushing is performed exclusively with argon. Regularly calibrated programs: Lodpfx Asybcfkjdqeri - Fe-10, Fe-15, Fe-30 - Al-10, Al-20 - Cu-20 Overview of installed programs: - Fe-01-M / Fe-10 – low alloy steel - Fe-01-M / Fe-30 – Cr / CrNi steel - Fe-15-M / Fe-15 – free-cutting steel - Al-01-M / Al-10 – pure aluminum - Al-01-M / Al-20 – AlSi alloy - Cu-01-M / Cu-20 – CuZn alloy Technical Data: Device Details: - Device type: Optical Emission Spectrometer (OES) - Manufacturer: SPECTRO / AMETEK - Model: SPECTRO MAXx - Construction: Benchtop unit Electrical Data: - Power supply: 115 / 230 V AC - Frequency: 50 / 60 Hz - Power consumption (operation): approx. 400 VA - Power consumption (standby): approx. 180 VA - Fuse: 16 A (slow-blow) Gas Supply: - Operating gas: Argon (Ar) - Argon purity: min. 4.8 (99.998%) - Inlet pressure: approx. 7 bar Argon Consumption: - Stand-by: approx. 6 l/h - Continuous operation: approx. 23 l/h - Analysis operation: approx. 200 l/h Environmental Conditions: - Operating temperature: +10 °C to +30 °C - Relative humidity: 20–80%, non-condensing Dimensions & Weight: - Size (W × D × H): approx. 600 × 740 × 460 mm - Weight: approx. 60 kg Important Note: The table shown in the photos is not included in the sale. Condition: Used Scope of delivery (see images): - SPECTRO MAXx spectrometer - PC with monitor, keyboard, and mouse - Argon unit - Original manuals and software media Subject to change and errors in technical data. For further questions, we are happy to assist you by phone.

Condition: used, mileage: 670,000 km, first registration: 09/2018, brakes: intarder, DAF XF 480 2018 TRACTOR UNIT, AUTOMATIC, INTARDER, ADR, 670,000 KM Ledpfx Adeyr R D Noqori

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. The oil drip tray is used for the storage of non-spillable or opened containers such as paint cans, paint buckets, cleaning agents, etc. The oil drip tray can be optimally placed in a shelf rack. The scope of delivery includes: 01x oil drip tray, II. choice (new goods) Manufacturer: SSI Schäfer Type: OAW 4800 Material color: sendzimir galvanized Capacity: approx. 60 liters load capacity: 200,00 kg total width: approx. 1.020 mm Lodpfxen Atm De Adqjri Usable width: approx. 970 mm Total depth: approx. 790 mm Usable depth: approx. 784 mm Total height: approx. 125 mm Useful height: approx. 95 mm Material thickness: approx. 3.00 mm Weight | pc.: approx. 26,960 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Recyclables depot lockable  The article is a recyclable material depot. The depot is equipped with a lowering gate as a locking mechanism and thus offers secure protection for valuable goods and merchandise. Dimensions: 4.25 metres wide, 1.35 metres deep and 2.85 metres high Lrjdpfsh I D Auox Adqei Manufacturer locking mechanism: Warema Condition: used  Complete factory locking system, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Plant as new, used only three times!!! Lrjdpjx Dhbzofx Adqsi Hammer mill Type: HMC-4 Motor power: 4 kW Number of hammers on rotor: 16 Capacity: 150–350 kg/h Material extraction system Type: FM300SN Output: 3900 m³/h Motor power: 2.2 kW This plant is suitable for shredding both plastic parts as well as wooden slats and branches.

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 5083, travel distance X-axis: 440 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 210 mm, For sale: B3000 Dosing Machine in very good overall condition Due to the closure of our site, we are selling our B3000 dosing system, which is only two years old. The machine has had minimal use and currently has an accounting residual value of CHF 120,000. Additionally, a credit note worth €9,000 for spare parts procurement for this machine from BDtronic will also be included in the sale. The machine will remain set up until January 2026 and can be inspected in Mendrisio. Please note that it is currently out of service and will require a complete maintenance check before being recommissioned. Therefore, a live demonstration in operation is not possible at this time. Lsdpfx Asxzpdxodqeri Technical specifications: - Sequential dosing of three different resins or foams - Delivery rate: 1–4 g/s Materials processed: - Elantas Elan-tron PU 505 HR/PH3 - Elantas Elan-tron PU 505 LR/PH3 - Elantas Micares X1080 R14/P 978 Further technical details and dimensions can be found in the attached PDF documentation. Inspection available by appointment. Dismantling and transport to be organized by the buyer. Dismantling can be supported by BDtronic, which has estimated 3 days work at €2,770 per day.

Condition: used, tank capacity: 590 l, GENERAL Design: Container Remarks: Frame made of V2A; Internal dimensions approx. 1100 x 700 mm; Wall height approx. 710 mm; Outlet approx. 100 x 100 mm with plastic components (presumably Teflon); Outlet design may vary on some containers (see last 3 photos) Total width: 810 mm Total height: 1,200 mm Total length: 1,230 mm Top: Open with loose cover Location: Bremen Volume: 590 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: Pharmaceutical TANK Bottom: Conical bottom Supporting structure: Frame EQUIPMENT Note: Signs of use Ledpeyck Dwsfx Adqsri

Condition: used, tank capacity: 760 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, Fe (galvanized); Cleaning certificates available; Disc valves not present on all containers, some only with flanged closing caps (see photos); Housings of disc valves made of aluminum Ledpeyci Nxofx Adqjri Overall width: 1,050 mm Overall height: 1,710 mm Overall length: 1,250 mm Location: Bremen Nameplate: Volume: 760 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: plant protection chemicals TANK Bottom structure: eccentric conical Support type: Frame EQUIPMENT Manhole / dome: on top head (DN 400) Outlet: 250 mm Note: Signs of use

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) Ljdpfx Adox Up Igsqori - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: good (used), functionality: fully functional, Manufacturer: Colortronic Type: CSE Power: 0.8 kW Equipment: Stainless steel lance with suction hose Lsdpjyryl Njfx Adqeri

Condition: good (used), functionality: fully functional, Manufacturer: SHINI Model: SAL-3U-CE Power: 1.15 kW Equipment: Stainless steel lance with suction hose Ljdoyrylispfx Adqjri Two units available Price: 350 EUR per unit

Condition: excellent (used), functionality: fully functional, mileage: 633,000 km, power: 338.33 kW (460.00 HP), first registration: 02/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Active Space cabin with air suspension, Spoiler, side fenders, Cursor 13 LNG engine, 460 hp, Euro 6, Hy Tronix gearbox, 12 gears, Retarder, double tank, hydraulic system, Year 02/2019, Km 632.0000 Ljdpfowhffusx Adqsri

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Lrjdpfex A U Ncsx Adqji Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Year of construction: 1998, condition: good (used), Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U -Drive: 0.75 kW -Inlet: 590 x 610 mm Ledpox Td Ilefx Adqeri -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg

Condition: excellent (used), MATERIAL TRANSPORT & DOSING SYSTEM - COLORTRONIC WITH 3 COMPONENTS Lrodpfoyh Htcjx Adqoi COMPLETE WITH CONTROLLER

Condition: excellent (used), MATERIAL TRANSPORT & DOSING SYSTEM - AZO (4x distributors) Lsdpfx Aeyh E Rasdqsri

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 23,000 kg, Year of construction: 2019, operating hours: 9,563 h, LIEBHERR LH22M. Year: 2019. Hours: 9,563. Hydraulic cab. Four outriggers. Solid tyres. 5-meter industrial boom. 4-meter industrial stick with hydraulic line for attachments. Fitted with stone grapple. CE certified. Excellent condition. Lredpfx Aoyh N Tfjdqsi

Condition: new, Year of construction: 2021, approx. 480,000 pieces Cable Gland PG7 3-6.5 Grey Packed per 50 pieces Lrsdpfxeu Iw Efj Adqei Package price for taking full quantity € 0,01 per piece

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Lrsdpfxjyh A Iij Adqji Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: used, mileage: 907,957 km, power: 294 kW (399.73 HP), first registration: 03/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, low noise, onboard computer, parking heater, traction control, Gross vehicle weight rating: 18,000 kg, leaf-air suspension, retarder, digital tachograph, shunting coupling: ROCKINGER SK5, PTO: switch for ZF PTO, low-noise: noise level 80 dB (92/97EC), MAN BrakeMatic, brake assist: Emergency Brake Assist 2, electronic stability program ESP, traction control ASR, automatic climate control, auxiliary heater: EBERSPAECHER D4S, comfort driver’s seat, air-suspended driver’s seat, driver's armrest, heated driver’s seat, headlamp leveling, radio: MAN Media Truck, AUX & USB port, sound system, Bluetooth phone prep, Lane Guard System (LGS), multifunction steering wheel, adjustable steering column, driver’s lumbar support, alloy wheels: ALCOA Dura-Bright EVO, electric windows (2x), fog lights, exterior mirrors electrically adjustable and heated, curb mirror right, heated wide-angle mirror, immobilizer, central locking with remote control, tinted side windows from B-pillar, rear differential lock, underrun protection front, sun visor, refrigerator, 2 work lights, hill start assist: EasyStart, spare wheel carrier, 1x15-pin connector, manual roof hatch, cornering light, carpet on engine tunnel, cab insulation: NORDIC, electronic speed limiter: 82 km/h, voltage converter, sprung cab, front springs parabolic 7.5 t, rear air springs 13 t, High-Line dashboard, rear axle hypoid HY-1350, axle ratio i 2.85, external data interface control module (KSM), 1-cylinder air compressor 360 cc, controlled rocker lever brake (EVBec) 3-stage, flame start system, crossmember for trailer coupling, steel air tank, ADR wiring for tank truck, ADR type AT, ADR type OX, supply kit for semi-trailer with lift axle or starting aid, 2 air horns on cab roof/roof spoiler, trailer ABS socket behind cab, 24V socket for tank truck (15-pin), heated air dryer, 40 mm fifth wheel, ADR inspection and certificate. This is a non-binding... Lsdpfxsytymvj Adqori

Condition: good (used), Bushing material, bushing material, bearing material -Inner diameter: 339 mm Lsdpfjcwdmkjx Adqjri -Outer diameter: 422 mm -Length: 331 mm -Material: gunmetal -Quantity: 1x piece available -Weight: 142 kg

Condition: used, Year of construction: 2013, machine/vehicle number: HF 130: 0130410, overall weight: 1,910 kg, inner dimension length: 5,000 mm, inner dimension width: 2,159 mm, total length: 6,530 mm, total width: 2,480 mm, total height: 3,640 mm, rotational speed (max.): 1,400 rpm, power: 1.5 kW (2.04 HP), Technical data Capacity: 15cbm Empty weight: 1910kg Gearbox type: Double gearbox 063/130 Manufacturer: HF lnventer Electric motor power: l,SkW Number of motor revolutions: 1400 rpm Lrodpfxer Drids Adqji Transmission ratio: 1/400 Serial number: HF 130: 0130410 NMRV063: 708271842 Power supply: 400 VAC Chain scraper: 168-1 Z=22 Removal of tractive force: Bearing set UCP207, 2 pcs. Coupling: Yes, LC170 l 1tk Chain scraper: 168-1 Z=25 Remove expansion shaft: UCT207 Bearing set 61, 2 pcs. Partition detection: UCP204 Bearing set, 2 pcs. Number of rollers: 10 Tosk type: 6006

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation Ljdpfx Adoua Nngoqjri - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Condition: used, mileage: 717,000 km, power: 290 kW (394.29 HP), first registration: 12/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Mercedes Actros 1840 4x2 tractor unit * Euro 6c * Long-distance cab with 1 bed * ACC adaptive cruise control * Lane assist * Blind spot assistant * Differential lock * Leaf-air suspension * Automatic climate control * Auxiliary (parking) heater * Heated seats * PTO (power take-off) * Radio/CD * Navigation system * Xenon headlights * Alcoa alloy wheels * Electric windows Lsdpoyg T T Aefx Adqsri * 1st owner * ADR FL/AT (hazardous goods certified) * Unladen weight 6,750 kg * Multiple units available

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Ledpjqi Eh Hofx Adqjri Vibrating feeder Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc.