Used 65 Y for sale (24,373)

Condition: used, mileage: 323,500 km, power: 120 kW (163.15 HP), first registration: 01/2014, fuel type: diesel, brakes: retarder, color: red, gearing type: automatic, emission class: euro5, number of seats: 15, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal no.: 1106 * MB 516 Sprinter * VDL body * Mid-City * Lettering - V I N Y L - the vehicle is fully wrapped Ledjnp Dhuopfx Aigjrr * Class M3 * Water pump and V-belt / idler pulley replaced new in 02/2024 * Automatic transmission * TELMA RETARDER * Driver's air conditioning * Passenger compartment – A/C * Auxiliary heater / stationary heating * Convector heating * Seats: 15 * Standing places: 12 * Vehicle speed approx. 99 km/h * Standing places * Manual folding ramp * Inspection book available * Length: 7.361 m * The vehicle has minor body damages – see pictures * More photos available on request * Front axle tires in good condition. * etc. * All information without guarantee * Subject to prior sale * Please refer to our general terms and conditions

Condition: used, mileage: 433,626 km, power: 120 kW (163.15 HP), first registration: 02/2013, fuel type: diesel, next inspection (TÜV): 12/2025, color: white, gearing type: automatic, emission class: euro5, number of seats: 14, Equipment: ABS, air conditioning, parking heater, * Our internal no.: 1089 * MB Sprinter 516 * Type: City 35 * EVOBUS - ORIGINAL * 2 x AIR CONDITIONING * First registration EURO 5 * New engine in 06/2021 at 341,638 km (current engine: 91,988 km), repair invoice amounting to 12,457.63 € is available * Auxiliary heater / stationary heating * Driver's seat heating * Gorba destination display with control unit CU5 * TFT monitor preparation * Convector heating * Seats with 3-point seat belts Lrodownlhpspfx Aigsr * 13 seats + 1 wheelchair space * 9 standing places * Mechanical fold-out ramp, ... * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * The vehicle may be in use / mileage and condition may vary * All information without guarantee * We reserve the right of prior sale * We refer to our terms and conditions

Condition: used, mileage: 579,278 km, power: 120 kW (163.15 HP), first registration: 11/2017, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 15, Equipment: ABS, air conditioning, * Our internal no.: 1090 * MB Sprinter 516 * Type: City 35 * EVOBUS - ORIGINAL * 2 x AIR CONDITIONING * First registration 11/2017 - EURO 6 * New engine in 05/2024 at 534,162 km (current engine: 45,116 km), repair invoice amounting to approx. 15,000.00 € is available * Complete overhaul of automatic transmission including new torque converter in 07/2024 * Vehicle has dent/damage * Auxiliary heater / stationary heating * Driver's seat heating * LAWO destination display with SicmaControl unit * TFT monitor preparation * Convector heating * Seats with 3-point seat belts * 11 seats Lrjdpfxswnlhvs Aiger * 12 standing places including 4 emergency folding seats or 1 wheelchair space & 2 emergency folding seats * Mechanical fold-out ramp, ... * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * All information without guarantee * We reserve the right of prior sale * We refer to our terms and conditions

Condition: used, mileage: 634,200 km, power: 120 kW (163.15 HP), first registration: 10/2013, fuel type: diesel, brakes: retarder, gearing type: automatic, emission class: euro5, number of seats: 11, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1042 * Sprinter 516 * Original EVOBUS City 65 * Automatic transmission * Large passenger compartment - air conditioning * Driver's seat - air conditioning * Auxiliary heater / parking heater * Technical repair history includes: * Torque converter €1,114.78 * Reversing gear €3,900 * Automatic transmission €4,796.33 * Door drive with motor €2,025 * New rear axle air bellows 11/2022 * Headlights * TELMA €5,933.40 * Differential 1,159.52 * DIESEL ENGINE - Exchange €9,114.33 / February 10, 2022 Lrodpfx Ajtqk Hfsigjr * New front brakes 03/2023 * New front brake discs 05/2022 * New starter 02/2022 * Diesel particulate filter exhaust system 02/2022 * New front and rear engine mounts 02/2022 * New intercooler 02/2022 * New viscous fan 02/2022 * New air conditioning compressor 06/2022 * Intercooler / charge air hose / 10/2022 * etc., ... List of €41,355.17 is available! - * Matrix * Cruise control * Convector heater * Mechanical folding ramp * Driver's compartment protective screen * etc. * All information without guarantee * We reserve the right to sell prior to sale * Please refer to our terms and conditions

Year of construction: 1993, condition: used, machine/vehicle number: 24323, For corner joints, mullions and posts are designed for optional adhesive or nail hole applications. Lrsdpobnnwqjfx Aigor Water drainage slots in the cover frame and mullion profiles. Recesses for SCHUCO window handles. Free movement of the mullion bar groove in window sash profiles, designed for inward-opening and outward-opening window profiles. Stamping force, depending on air pressure (6 - 8 bar): 0.6 - 0.8 MPa. Air consumption: 9 l/cycle. Space requirement: 620 x 380 x 1250 mm. Weight: approx. 106 kg.

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - Y Multi-axis CNC turning center for complete machining of turning and milling parts, equipped with integrated spindle motors (ISM) on both main and sub-spindle, featuring a thermal compensation system (liquid-cooled). Drive power: Main spindle: 29 kW Sub-spindle: 22 kW Speed range: Main spindle: 0-5,000 rpm Sub-spindle: 0-7,000 rpm Spindle interface (DIN 55026): Main spindle: KK6 (max. bar capacity 65 mm) Sub-spindle: KK6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered to distribute resultant cutting forces over two axes, providing exceptional rigidity for all machining operations. All linear axes feature preloaded roller guides, a digital drive system, integrated spindle encoder, and state-of-the-art SINUMERIK 840D control. Includes: * Hollow clamping cylinder with draw tube * Parts ejector and flushing system through the sub-spindle * 2 x 12-position VDI 30 tool turrets, radial mounting with direction logic, accommodating up to 2 x 12 driven tooling stations * Swivel speed adjustable via feed selector Performance data: Max. 6.7 kW at 2,650 rpm Constant torque: 25 Nm Ledpfx Aioy Svz Iogerr Speed range: 0-5,000 rpm - C-axis for main and sub-spindle - TRANSMIT software for simple C-axis programming * Finished parts unloading device * Sinumerik 840D * Chip conveyor with programmable discharge height of 1,200 mm (hinged belt type) * Integrated coolant system in the chip conveyor: 2 high-pressure pumps at 14 bar 2 rinsing pumps at 3.7 bar * Electrical cabinet cooling unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Documentation IMPORTANT: Export/re-export from the EU requires an export license R7AW2001 – Year of manufacture: 2008 Including: S6Z170 PC keyboard Siemens R7Z460 Machine installation and mounting hardware X1Z100 EMCO standard bar feeder interface R7Z030 Alarm lamp R7Y750 Finished part transfer conveyor, crosswise S6Z900 EMCO TOPLOAD 10-65/3300 R7Z620 Automatic tool setter – HT665 S6Z110 Setting gauge VDI 30 + Various static and driven tool holders + Clamping devices for main spindle and sub-spindle

Condition: used, Cutter Duker Rex Hydro 65 Made of stainless steel Lsdpowi Ixmsfx Aigorr Distribution cabinet made of special steel, inside the machine Control box integrated in machine housing Noise-canceling cover Bowl capacity: 65 liters Electric power: 15kW Voltage: 380V / 50Hz 3 N/PE

Condition: used, Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover made of special steel, stainless steel Noise–canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Lrodpfjgqgkcsx Aigsr Delivery time: 10 working days after advanced payment

Condition: used, Rex Hydro Cutter 65 is a professional bowl cutter designed for meat processing and the production of emulsions, sausages, pâtés, and other food products. Equipped with a 65-liter bowl and a six-knife cutting system, it delivers fast, precise, and consistent chopping and mixing performance. Lrsdpfxezgn Tvj Aiger The machine is manufactured from high-quality stainless steel, ensuring durability, easy cleaning, and excellent hygiene standards. It features two knife speeds and two bowl speeds, allowing operators to adapt the process to different products and production requirements. A stainless steel cover and additional noise-reducing protection contribute to safe and comfortable operation. Powered by an 18 kW motor, the Rex Hydro Cutter 65 provides reliable performance and high productivity for small and medium-sized meat processing facilities. Technical Specifications Manufacturer: Rex Model: Hydro Cutter 65 Bowl Capacity: 65 L Number of Knives: 6 Knife Speeds: 2 Bowl Speeds: 2 Motor Power: 18 kW Power Supply: 400 V / 50 Hz Dimensions: 1350 × 900 × 1300 mm Construction: Stainless Steel

Condition: used,

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Lrsdpfxsym A E Io Aiger Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chucking system Two 10-station turrets with driven tool stations Counter spindle External reference: L. Schaible

Condition: good (used), Year of construction: 2001, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale is a machining center with Gentry design of the DMC brand and type 65V linear Particularly noteworthy is the high-speed spindle with 18,000 rpm The machine is in good condition and fully functional Technical data Commissioning: 2001 Control: Heidenhain TNC 430 i Table size: 850x600 mm Tool holder: SK 40 Ledpfxjt I Tple Aigsrr Tool changer: 30-fold Travel X/Y/Z: 650x500x500 mm Max. speed: 18,000 1/min Feed rate max: 60 m/min Dimensions lxwxh: 2650x2700x2500 mm Weight: 10,500 kg On request, for an extra charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 1997, Manufacturer: TRAUB Model: TNC 42/65 DGY Machine Type: CNC turning center / CNC twin-spindle lathe Year of Manufacture: 1997 Control System: TRAUB System TX 8F Condition: Used Technical Data Max. bar diameter: 65 mm Ledpezkk Htjfx Aigsrr Max. turning diameter: approx. 175 mm Max. turning length: approx. 450 mm Max. spindle speed: approx. 4,000 rpm Main spindle power: approx. 18.5 kW Counter spindle power: approx. 11 kW Spindles Main spindle Counter spindle C-axis 2 CNC tool turrets Each with 10 tool stations Powered tool stations Travel and feed rates Travel in X-axis: approx. 140 mm Travel in Z-axis: approx. 450 mm Travel in Y-axis: approx. ±35 mm Rapid traverse X-axis: approx. 15 m/min Rapid traverse Z-axis: approx. 30 m/min Rapid traverse Y-axis: approx. 6 m/min Bar feeder Manufacturer: TRAUB / STAMAG Model: DN 61 Machine Dimensions Machine dimensions: approx. 4,150 × 2,000 × 1,800 mm Machine weight: approx. 4,750 kg

Condition: used, mileage: 490 km, power: 375 kW (509.86 HP), axle configuration: 6x4, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone at ...). Mercedes-Benz Arocs 2651 L 6x4 short timber transporter. SCHEMEL SHORT TIMBER BODY, Manufacturer: EBERT, Dimensions: approx. 6,750 mm between headboard and crane. 4 EXTE stanchions D6 – adjustable with clamp fastening and lashing ratchets, or counterholders for load securing. 8 EXTE stanchions D5 – telescopic. Special Z-profile subframe, 200 mm high, closed in the center section with chequer plate. Welded headboard construction with internal special aluminum profiles, approx. 2,600 mm high. 4-piece folding and telescopic tarpaulin cover, designed for timber transport. Hose chains and supply lines of the highest quality, with access ladder for easier ascent. Installation of side marker lights, access to crane, dual compressed air couplings, covers for battery box and air tanks on both sides with aluminum tread plate. Electric and hydraulic connections (engine start/stop from the crane seat), oil shut-off valve, tool compartment for chainsaw, bracket for snow chains, holders for broom and shovel on the headboard. Body primed, chassis black, epoxy primed and coated in acrylic quality, oil filled, TÜV approval – UVV inspection – tachograph test included. With: Palfinger-EPSILON loader crane Y CRANE ON 2 M 12 Z91 – fully hydraulic timber loading crane M12Z. EPSILON loading crane, crane folded sideways, version HIC/HD4/04. Base unit and crane column painted RAL 7021 anthracite grey, hydraulic lines protected, integrated operating switch and service interval indicator. MZ91_2: Z-boom system 9.1 m, reach: 9.1 m, net lifting moment: 107 kNm, maximum performance: 107 kNm. HHC_2: High seat with removable manual control, including mechanical slewing gear at the crane column (without slewing ring). B1B Electronic braking system with ABS and ASR, B1F heating, electronic air supply unit, B1H electronic air supply and control, medium, B2A disc brakes on front and rear axles, B2X electronic parking brake, B2Z additional parking brake on front axle, B4A condensate monitoring for air system, B4M air reservoir, steel, B5A trailer brake, two-line, brake couplings left, C2R wheelbase 4,800 mm, C4L frame overhang 2,550 mm, C6J non-regulated steering aid pump, C6Q stabiliser, front axle, C6U additional stabiliser, rear/trailing axle, D0A leather steering wheel, D0S compressed air connection in driver’s cab, D1C comfort driver's suspension seat, D1N functional co-driver’s seat, D2N seat backrest release, driver’s seat, D3B comfort bunk, lower, D4T cross curtain in front of bunk(s), D4Y sun roller blind, side, driver side, D5F LED ambient lighting, D6G automatic climate control, D6M additional hot water heating, cab, D7A extra thermal insulation, D8N electric lifting roof, E3R 24V/25A power socket, co-driver footwell, E5H night driving light switch, E5K MirrorCam switch, on bed, E6A trailer socket 24 V, 15-pin, E6Z reversing alarm, E7F cable remote control for air suspension, E9G pre-installation for electrical devices, F0F side module, N3 vehicle, F0T illuminated Mercedes star, F2E floor variant, tunnel 170 mm, for storage compartment left, F2G cab width 2.30 m, F2W StreamSpace, F5L outside sun visor, transparent, F6C tinted windscreen, F6I heated front mirror, F6Q air horn, F6T MirrorCam, Lredpfxoyfpwno Aigsr F8V light sensor, F8W rain sensor, G0B drive train, 44 t to 80 t, G0R gearbox support arms, optimized for removal, G0T...

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 32 kg, total width: 490 mm, total length: 575 mm, total height: 880 mm, type of input current: DC, tank capacity: 60 l, warranty duration: 24 months, We offer for sale a Universal Vacuum Cleaner Karcher NT 65/2 Tact2 Condition of the machine – Perfect, brand new unit Year of manufacture – 2024 Vacuum cleaner with TACT² system. Designed for removal of hazardous class M dust. Meets the highest European safety standards. Technical Specifications - Power supply parameters: 1 / 220–240 / 50–60 Ph / V / Hz - Airflow: 2 x 74 l/s - Vacuum: 254 / 25.4 mbar / kPa - Container capacity: 65 l - Container material: Plastic - Max rated power: 2760 W - Nominal diameter: ID 40 - Power cable length: 10 m - Sound pressure level: 73 dB(A) - Colour: anthracite - Weight without accessories: 24.5 kg - Weight with packaging: 31.332 kg - Dimensions (L x W x H): 575 x 490 x 880 mm Scope of Delivery - Drain hose (oil-resistant) - Automatic shut-off at maximum collected liquid level - Antistatic system - Metal suction tube, 2 x 550 mm - Filter cleaning, Automatic Tact² Filter Cleaning System - Flat pleated filter, cellulose fibre material - Crevice nozzle - Electrically conductive elbow - Universal floor nozzle width: 360 mm - Bumper bar - Push handle - Swivel castor with brake - Safety class: I Lrodjx Aux Rjpfx Aigsr - Electrically conductive suction hose, 4 m The vacuum cleaner is equipped with an antistatic system with grounding of suction nozzles, tubes, hose, and elbow to discharge electrostatic charges that may occur when vacuuming very fine dust. It can operate with suction hoses of 40 mm and 60 mm diameter. It is ideal for the automotive and construction industries as well as general industrial applications. Two turbines ensure high suction power. Each is equipped with the TACT system, allowing the vacuum to remove up to 1000 kg of fine dust (class A) using a single filter. The flat pleated Eco filter is suitable for collecting very fine class M dust as well as liquids. Its design offers a large filtration surface while maintaining compact overall dimensions. The TACT2 automatic filter cleaning system alternately shakes half of the filter every 7 seconds, effectively preventing reductions in suction power during operation. Included is a drain hose, which facilitates emptying water directly into a floor drain. The vacuum cleaner has a 65-litre plastic container.

Condition: new, cutting pressure: 65weight approx.: 1.600heigth: 1880motor: 5,5width: 1700length of knive: 10throat depth: 305stroke: 55  5 working stations  one foot pedal  hydraulically driven  table at punching and notching station with gauge  Lrodpfsttc Utex Aigor user manual in GERMAN and ENGLISH

Year of construction: 2016, condition: like new (used), Ytron Vibration Mobile Stainless Steel Feeder Hopper EX rated 11 2 D IP65, Atex Vibration motor Temperature probe Year 2016 Lodpszp N Exofx Aigsrr As new condition Including control box

Condition: ready for operation (used), KUKA 1FK7083-5AF81-1YY3-Z S16 servo motor, serial number: YFV950655173021, used, in good condition, 100% functional, scope of supply as shown in the photos. Lrodpfozv Hpzjx Aiger

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFVN50665657003, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lrodpfxozv Hp Is Aigjr

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Lrodpfx Aiozp E T Sogor Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: new, mileage: 25 km, power: 129 kW (175.39 HP), first registration: 08/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Year of construction: 2026, Equipment: ABS, USB port, air conditioning, retarder, = Additional Options and Accessories = - Air conditioning for the driver - Air conditioning system = Further Information = Damage: none Ledpjzv Tzdsfx Aigorr = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sales, and typographical errors excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: ready for operation (used), KUKA 1FK7083-5AF81-1YY3-Z S16 servo motor, serial number: YFV950655173018, used, in good condition, 100% functional, scope of supply as shown in the photos. Ljdpfxezvafvs Aigjrr

Condition: ready for operation (used), KUKA 1FK7103-5AF81-1YY3-Z S17 servo motor, serial number: YFV950655147011 - Connector with a small crack at the thread, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lrsdpfszvaf Nex Aigor

Condition: excellent (used), mileage: 651,005 km, power: 331 kW (450.03 HP), first registration: 03/2021, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2021, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, power assisted steering, retarder, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Aluminum fuel tank - Speed limiter - Intarder - Tilting hydraulics - Air conditioning - Alloy wheels - Air suspension - Particle filter - Radio/CD player - Reversing camera Lodpfx Aozv D Ineigerr - Sleeper cab - Sun visor - Stability control - Auxiliary heater - Bumpers in body color - Automatic heating system - Power take-off (PTO) = Notes = SCANIA R450 NGS Hydraulics Retarder 651005 km 2021 Full air suspension Alcoas Smart Tacho 2 Auxiliary air conditioning Reversing camera Air conditioning ACC Cruise control Refrigerator Seat heating/cooling Automatic transmission Euro6-D TÜV/MOT/APK valid until 03-2027 German vehicle Chassis number: YS2R4X20005616734 Video of the truck (YouTube): EXPORT SERVICES ————— • Austrian transit registration/license plate with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with trailer The prices for export services are exclusive of the offer price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,742 cc Axle Configuration Tire size: 315/80R22.5 Axle brand: MICHELIN Brakes: Disc brakes Suspension: Air suspension Front axle: Alloy wheels; Max. axle load: 7500 kg; Steered; Tire tread left: 80%; Tire tread right: 80% Rear axle: Double tires; Differential lock; Alloy wheels; Max. axle load: 11500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 40%; Tire tread right outer: 40%; Reduction: single reduction Weights Unladen weight: 7,265 kg Payload: 11,735 kg GVW: 19,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 03.2027 Technical condition: very good Optical condition: good Further Information Please contact Olivier Geerts or Edwin Geerts for further information.

Condition: ready for operation (used), Tyco V23401-T2654-D209 resolver SN: 03116595, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ledpfx Aezu Hnneigsrr