Used 65 Y for sale (25,236)

Condition: used, mileage: 151,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 06/2018, emission class: euro6, color: white, brakes: retarder, number of seats: 15, Equipment: ABS, air conditioning, parking heater, * Our internal no.: 1094 * Very well-maintained vehicle * (Two identical vehicles available) * Sprinter 516 * Original EVOBUS bodywork * City 65 * Retarder * LOW ORIGINAL MILEAGE – vehicle FIRST OWNER + Will-registration * Matrix display: front / side / side / rear with control unit * Bus lift system * Auxiliary heater * Stationary heater * Driver’s cabin air conditioning * Passenger compartment air conditioning * 2x folding seats * Double glazing * Convector heating * Manual folding ramp * Preparation – interior monitor (the monitor and cash register/printer shown will be removed prior to sale) * Clean vehicle * Bus is in use – mileage and condition may vary. * ALL INFORMATION WITHOUT GUARANTEE * INTERIM SALE RESERVED * OUR TERMS AND CONDITIONS APPLY. These are part of the contract upon sale! Giodpfxowdc Dto Ag Rsl

Condition: ready for operation (used), empty load weight: 1,300 kg, x als gemotoriseerd Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z': 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm Giedpfx Asxpgfiog Rjl

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in good condition. It is powered up and can be inspected by appointment. Available: immediately Year of manufacture: 2014 Commissioning: January 2015 Operating hours: --> see picture Machine no.: 252 153 Control unit: Matrix II Travel X1/X2: 310 / 310 mm Rapid traverse X1/X2: 24 / 24 m/min Travel Y1/Y2: ±77 / ±77 mm Rapid traverse Y1/Y2: 10 / 10 m/min Travel Z1/Z2: 605 / 605 mm Rapid traverse Z1/Z2: 24 m/min Drive power: 19.5/22 kW Max. spindle speed: 4,000 rpm Tool turret: 2 x 12 stations Live tool drive: 4,000 rpm Live tool motor: 7.5 kW Dimensions: 7,723 x 4,313 x 3,335 mm (L x W x H) Weight: 12,200 kg Voltage: 400V Fuse protection: 80A Note: The machine is factory equipped with the “Relocation Detector”. Upon re-commissioning, the machine must be unlocked by Mazak. Gedpfx Agsi Ik Hks Roil Options: - Y-axis - GL200F gantry loader - Air blow device for workpiece handover - Chip conveyor, rear discharge - Cylinder and polar interpolation (EIA) - High-pressure pump and return pump (original pumps available) Accessories HD 1: - Kitagawa B-210 power chuck - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Accessories HD 2: - Kitagawa B-210 power chuck - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Price Incoterms EXW (loaded onto provided truck) We also offer a tool holder package for this machine (see last picture). Note: this is a separate lot, not part of the machine offer. Composed of: Static holders: 2 pcs. external turning tool holder 13 pcs. facing tool holders 3 pcs. parting-off holders 5 pcs. Ø 32 boring bar holders 2 pcs. Ø 40 boring bar holders 8 pcs. Ø 50 boring bar holders 23 pcs. reduction sleeves Driven tools: 2 pcs. axial drilling and milling head SK40 8 pcs. radial drilling and milling head SK40 3 pcs. radial drilling and milling head ER40 5 pcs. angle heads The original value of the entire package was approx. €85,000.00 Available: after sale of the machine Price (negotiable): €35,000.00 (INCOTERMS EXW, without transport)

Condition: ready for operation (used), Hainbuch TOPlus Kombi Axzug 65 3155011 / A073923.0000C clamping chuck, used, in good condition, 100% functional, delivery as per photos. Gedpfx Agex Erq Sj Reil

Condition: good (used), Year of construction: 2010, Machine have live tools option and Y axis. Cutting tools not come. Parts shown by hand not come. Giodpsxpw Nlsfx Ag Rol Technical details shown on pictures.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Vecoplan drum chipper, robust. VTH 65 / 18 / 3. Infeed width 650 mm. Infeed height 180 mm. Rotor diameter 60 mm, solid steel. 3 feed rollers. 2 chopping blades. Screen size 55 x 55 mm. Counter-blade with interchangeable mount. 2 feed gearboxes, each with 3.0 kW power. Electrical control cabinet with control system. Drive motor 45 kW. Has not been in operation for 18 years. Godpjx Dlk Tsfx Ag Rsil

Condition: used, mileage: 142,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 06/2018, emission class: euro6, color: white, brakes: retarder, number of seats: 15, Equipment: ABS, air conditioning, parking heater, * Our internal ref.: 1093 * Well-maintained vehicle * (Two identical vehicles available) * Sprinter 516 * Original EVOBUS bodywork * City 65 * RETARDER. TELMA * LOW GENUINE MILEAGE – VEHICLE ONE OWNER * LED matrix display: front / side / side / rear with control unit * Bus lifting system * Auxiliary heater * Stationary heating * Driver's cab air conditioning * Passenger compartment air conditioning * 2 fold-down seats * Double glazing * Convector heater Gedpfxewg Nvno Ag Roil * Manual folding ramp * Pre-installation for interior monitor (the monitor and cash register/printer shown will be removed prior to sale) * Clean vehicle * Vehicle in operation – mileage and condition may vary. * ALL INFORMATION WITHOUT GUARANTEE * INTERIM SALE RESERVED * PLEASE REFER TO OUR TERMS AND CONDITIONS. These are part of the sale!

Condition: excellent (used), Year of construction: 2015, operating hours: 7,110 h, functionality: fully functional, DMG DMU 65 Monoblock 5-Axis Machining Centre (2015) Manufacturer: DMG Model: DMU 65 Monoblock Year of manufacture: 2015 Condition: Used, very good, still in production. Power-on hours: 21,336 h Spindle hours: 7,112 h Control: Heidenhain iTNC 530 X-axis: 735 mm Giodpfxjx Iwb Ij Ag Rol Y-axis: 650 mm Z-axis: 560 mm Tool holder: SK40 Spindle speed: 10,000 rpm Chip conveyor Internal coolant supply (IKZ) 40 bar Band filter system 3D probe Documentation Additional accessories optional.

Condition: excellent (used), mileage: 629,849 km, first registration: 12/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 9,540 mm, total width: 2,480 mm, Year of construction: 2012, = Further information = Technical specifications Number of cylinders: 6 Engine displacement: 6,693 cc Maximum front axle load: 7,300 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 7,280 kg Payload: 11,520 kg Gisdpfeutmldex Ag Rol Gross vehicle weight: 18,800 kg Condition Technical condition: very good Visual condition: very good Identification Registration number: 18-BBK-7 Further information Please contact Sales for more information. = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are exclusive of VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian) Available on WhatsApp and Viber. MOB: Dutch) Available on WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always check the payment details as stated on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: ready for operation (used), Hainbuch TOPlus Kombi Axfix size 65 chuck 2903, used, in good condition, 100% functional, delivery as per photos. Gjdpsx Erq Eefx Ag Rsil

Condition: good (used), axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2020, Equipment: ABS, = Further Options and Accessories = - EBS = Notes = Number of axles: 3, Unladen weight: 8,434 kg, Gross weight: 39,000 kg, Chassis type: Incomplete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year: 2020, Refrigerator unit manufacturer: Thermoking, Refrigeration unit model: SLXi300, Refrigeration unit: Diesel/Electric, Generator hours / electric: 29, Generator hours / diesel: 7,170, ATP valid until: 09_2026, Heating, Wall thickness: 65 mm, Cooling type: cooling, Axle type: SCHMITZ, Spare wheel, Spare wheel tread: 7 % = Further Information = General information Cab: Day Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gjdpfx Aoxzy Smeg Reil Gearbox: Manual Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 7 mm; Tyre tread right: 11 mm Axle 2: Tyre tread left: 9 mm; Tyre tread right: 9 mm Axle 3: Tyre tread left: 9 mm; Tyre tread right: 7 mm Weights Unladen weight: 8,434 kg Payload: 30,566 kg Gross vehicle weight: 39,000 kg Functionality Refrigeration unit: Diesel and electric (7,170 operating hours diesel; 29 electric) Wall thickness: 65 mm Environment Emission class: Euro 0 Maintenance APK (Safety Inspection): valid until 08.2026 Condition Technical condition: good Visual condition: good Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • A good price • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) registrations arranged quickly • Professional technical services • The assurance of “recognizable quality” • And more…. Please visit our website for special offers and the full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 725 h, load capacity: 300,454 kg, overall weight: 12,980 kg, transport length: 9,500 mm, transport width: 2,500 mm, transport height: 2,770 mm, next inspection (TÜV): 11/2026, fuel type: diesel, Brand: Genie S65XC Trax Year of manufacture: 2023 Stock number: GEN2146 Hours: 725 Last inspection: 7-11-2025 Fuel: Diesel Remaining tire tread: 95% Platform height: 19.86 m Working height: 21.86 m Horizontal outreach: 17.10 m Up and over: m Platform capacity: 300-454 kg Dimensions (L x W x H): 9.50 x 2.50 x 2.77 meters Total weight GVW: 12980 CE (Declaration of Conformity). Giedpfx Agjx I Eaxj Rsl All necessary documents and paperwork. Very nice machine! Machines are from the rental fleet. We provide inspection, maintenance, and transport.

Condition: used, first registration: 06/1975, axle configuration: 4x4, color: red, gearing type: mechanical, Year of construction: 1975, Unladen weight: 4,000 kg Maximum speed: 25 km/h Interior: black Number of keys: 1 Manufacturer: Mercedes-Benz Provincialeweg 5334 J VELDDRIEL, NL Gedpfx Aouu T S Hjg Rsil

Condition: ready for operation (used), Screening machine Främbs Freudenberg 24/65-1 Brand: Främbs Freudenberg Type: Euroclass Surface: 6500 x 2400 mm – 1 decks Driving: 18,5 kW E-Motor Giodotznfuspfx Ag Rol incl.: Springs

Condition: used, Year of construction: 2011, lifting height: 8,250 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 2.760 kg Functional Lifting capacity: 350 kg Working height: 1.030 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 296x165 Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Type: Monostar Y-83 Built in: 2011 Features: Max. Working height 10,25 m Max. Platform height 8,25 m Max. Lifting capacity 350 kg Max. Lifting capacity extension 350 kg Engine Batterie Platform dimensions L x B 2,64 x 1,50 m Platform lenght pushed out 3,55 m Overall dimensions (LxB) 2,96 x 1,65 m Weight 2.760 kg Transport height with railing 2,47 m Gsdpfx Aev Tiursg Reil Transport height without railing 1,30 m Moveable until working height 10,25 m Ground clearance 0,16 m Only indoor using no Specifics: white wide tires , Climbing ability 25% , Stop Points for Support System (PSA) available Location: 41468 Neuss immediately available

Condition: like new (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: Gsdpfxox E Dncj Ag Rjil • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete Gsdpfx Ajv D Nutsg Rjil -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Condition: good (used), functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, For sale is a conventional milling machine of the brand Deckel and type FP1 The small size of the machine makes it ideal for fast work with a small footprint The machine is fully functional Technical data: x-path 300 mm y-path 160 mm z-path 340 mm Tool holder SK40 Speed 40-2000 rpm Conventional control Table size: 600 x 210 mm Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. 1200x1100x1600 mm Loading and shipping throughout Europe can be organized on request. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website Gsdpougv Hvsfx Ag Reil

Condition: good (used), Year of construction: 1998, operating hours: 6,900 h, fuel type: diesel, Aerial work platform telescopic GENIE S-65 DEUTZ DIESEL 1998, boom lift with a working height of 21.81 meters. Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machinery, trucks, trailers, and attachments. All deliveries are at trade prices in 'as-is' condition without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make a non-binding appointment. Please call ahead as we are not always on site. Godpex Hlb Hefx Ag Rsil

Condition: excellent (used), Year of construction: 2004, MAZAK QUICK TURN NEXUS 200MS-Y Max. machining diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol 640T Nexus - KITAGAWA three-jaw chuck BB-208 for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder Gisdpsw Du S Asfx Ag Rol - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: used, Year of construction: 2000, Installed 2000 Mazatrol 640 T Number of axis: 5 Gedpfxjx Ry Ayj Ag Reil Spindle motor power 30 kw Number of tools slots: 40 Max dia: 560 mm Max turning length: 1067 max. spindle speed: 5000 1/min Tool Eye System bar diameter: 51 mm

Condition: good (used), axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,640 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2020, Equipment: ABS, = Additional Options and Equipment = - EBS = Remarks = Number of axles: 3, unladen weight: 8,434 kg, gross weight: 39,000 kg, chassis type: incomplete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, ABS, EBS, body year: 2020, side wall material: insulated, refrigeration unit manufacturer: Thermoking, refrigeration unit model: SLXi300, refrigeration unit: diesel/electric, operating hours electric: 50, operating hours diesel: 7,642, ATP valid: 09_2026, heating, wall thickness: 65 mm, cooling type: chilling and freezing, axle type: SCHMITZ, spare wheel, spare wheel tread: 9% = Further Information = General Information Cab: Day Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/65R22.5 Brakes: disc brakes Suspension: air suspension Axle 1: Tyre tread left: 8 mm; tyre tread right: 10 mm Axle 2: Tyre tread left: 8 mm; tyre tread right: 7 mm Axle 3: Tyre tread left: 10 mm; tyre tread right: 8 mm Weights Unladen weight: 8,434 kg Payload: 30,566 kg Gross weight: 39,000 kg Functional Refrigeration unit: Diesel and electric (7,642 operating hours diesel; 50 electric) Wall thickness: 65 mm Environment Emission class: Euro 0 Maintenance APK (general inspection): valid until 07.2026 Condition Technical condition: good Visual condition: good Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, years of manufacture, and price classes. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Good prices • Reliable trading • We speak many languages • We understand our customers • Assistance with import and transport • (Export) licence plates arranged quickly • Professional technical services • The security of 'recognisable quality' • And more... Please visit our website for special offers and the full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an enquiry via our website. Gisdpfsxxhqfsx Ag Rel Ask directly about our European warranty package.

Condition: used, functionality: fully functional, machine/vehicle number: Y635-2890GEF-5480, Year of construction: 1990, operating hours: 7,343 h, load capacity: 3,500 kg, fuel type: gas, mast type: triplex, construction height: 2,620 mm, fork length: 1,200 mm, empty load weight: 6,210 kg, drive type: Treibgas, LPG Forklift Chassis number: Y635-2890GEF-5480 Mast type: Triplex Condition: Limited operational readiness Technical condition: normal Giodpfxowqh Uko Ag Rjl Description: Clark C 500 Y 70 LPG No.: R0580 Year of manufacture: 1990 Operating hours: 7,343 The machine is in good visual condition and in used technical condition. A new LPG system has been installed. Fast and uncomplicated transport is possible upon request. This advertisement is for identification purposes only. A detailed description of the condition and possible equipment features is provided individually upon request. Subject to errors and prior sale. Sale to businesses only. All sales of used equipment are made with warranty and/or guarantee excluded. If you have not found your desired forklift, please contact us. We have a large selection of other machines on site. Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: good (used), Year of construction: 2001, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale is a machining center with Gentry design of the DMC brand and type 65V linear Particularly noteworthy is the high-speed spindle with 18,000 rpm The machine is in good condition and fully functional Technical data Commissioning: 2001 Control: Heidenhain TNC 430 i Table size: 850x600 mm Tool holder: SK 40 Tool changer: 30-fold Travel X/Y/Z: 650x500x500 mm Max. speed: 18,000 1/min Feed rate max: 60 m/min Dimensions lxwxh: 2650x2700x2500 mm Weight: 10,500 kg On request, for an extra charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Giodpfxet I Tpls Ag Rol Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20-NL-5012-2, Used Cabero GCHSD089MB/X7S-40 Y V dry cooler. Complete with 14 Ebm-papst W3G800-HG95-07 fans – 50/60 Hz – 0.9 kW – 770 rpm – 800 mm diameter, providing a total airflow of 214,700 m³/h. Also includes a control cabinet with Ziehl-Abegg UNIcon fan controller. Specifications: Brand: Cabero Model: GCHSD089MB/X7S-40 Y V Product type: Dry cooler Godpfx Aox A Tyaog Roil Capacity: 428.9 kW Number of fans: 14 Fan speed: 770 rpm Coolant: Glycol Airflow: 214,700 m³/h Fan diameter: 800 mm Surface area: 3,428.3 m² Dimensions: 12,650x2,360x1,750 mm (LxWxH) Year of manufacture: 2020 Stock: 1 unit