Used 4 Colours for sale (59,062)

Condition: good (used), Year of construction: 2008, sheet width 2050 mm plate thickness 20.0 mm ST pre-bending 16.0 mm ST diameter of upper rolls ca. 270 mm side roll diameter ca. 240 mm diameter of lower rolls ca. 250 mm Number of working hours ca. 7.800 h Control "EASY PRO" oil volume ca. 200 Liter voltage 380 V total power requirement 13.5 kW Isdpfezc Rv Tsx Aa Ieth weight ca. 9.000 kg Dimensions (only the machine) 4000 x 2080 x 1800 mm Good condition (!!) Current list price approx. 150.000 euros Special price available upon request Features: - Robust electro-hydraulic 4-roll round bending machine * Arc-shaped feed of the side rollers (swing arm technology) - 4-roller design offers a wide range of bending and rounding options * Rolling process completed in a single pass - Mobile control unit * DAVI "DAVI EASY PRO" numerical control * Manual or automatic operation selectable * Programming "Self-Learning" mode available * Control of all rollers and machine axes * Digital position display for the rollers - Curved feed of the side rollers (DAVI "PSG" guide system) * Tight bending radii of up to 1.1 times the upper roller diameter possible * Instead of the usual 1.5 times with linear guides * Optimal bending = short sheet ends during bending - Conical rolling possible via roller tilt * Tight diameters possible due to low machine frame - Electronic roller parallelism - Stepless speed adjustment (max. 5.0 m/min) - Bending on both sides - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Easy sheet removal thanks to low machine frame - Sturdy welded steel construction - Electro-hydraulic swivel bearing for easy tube removal - Operating instructions

Condition: used, This listing is for Thermo Scientific Cytospin 4 Centrifuge. The unit is in full working condition and ready for immediate use. Power-On Verified Iodjza Dcbspfx Aa Ioth The Thermo Scientific Cytospin 4 is a premier cell preparation centrifuge designed for thin-layer cell deposition. It utilizes centrifugal force to isolate and deposit cells onto microscope slides while maintaining cellular morphology. Features include a sleek design, simple touchscreen controls, and enhanced safety protocols. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Integrity: 100% Original Parts (Non-Refurbished) • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING Iedett Da Ispfx Aa Ioth MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: used, mileage: 588,547 km, power: 302 kW (410.61 HP), first registration: 08/2010, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 5,100 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 10,700 mm, total width: 2,550 mm, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,170 mm, Year of construction: 2010, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, spoiler, traction control, = Additional Options and Accessories = - Roof spoiler = Notes = Daf CF 85.410 6x2 with lift and steering axle. 9,000 kg front axle / spring suspension. Hiab 195-4 Year: 2006. Radio remote control. 4 x hydraulic extension. Loading box: 660 cm x 248 cm. Hardwood floor Stanchions. Trailer coupling. Toolboxes. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 65%; Tire tread depth right: 65%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 75%; Tire tread depth left outer: 75%; Tire tread depth right inner: 75%; Tire tread depth right outer: 75%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Steered; Tire tread depth left: 75%; Tire tread depth right: 75%; Suspension: Air suspension Weights Unladen weight: 11,785 kg Payload: 16,215 kg GVW: 28,000 kg Functional Crane: Hiab Maintenance APK (Technical Inspection): Valid until 03/2027 Financial Information Price: On request Itodpfxszfab Aj Aa Ioh Identification Model number: CF 85 410 6x2*4 / HIAB 195 CRANE = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: good (used), mileage: 595,209 km, power: 368 kW (500.34 HP), first registration: 01/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2018, Equipment: AdBlue, air conditioning, central locking, cruise control, fog lights, onboard computer, = Additional Options and Accessories = - Leaf spring suspension - Cab - Air suspension - Sun visor - Power take-off (PTO) Itodpfx Aajzfvg Uj Ieh = Notes = MAN TGX35.500 8x4*4 - Hyva Hooklift - Custom interior - Steerable rear axle - Euro 6 Year of Manufacture: 2018 Mileage: 595209 WMA92XZZ9JM795087 Hyva Hooklift - Year 2018 Steerable rear axle Euro 6 Automatic transmission Custom interior Refrigerator = Further Information = Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steerable; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Front axle 2: Tire size: 315/80R22.5; Double tires; Max. axle load: 9500 kg; Tire tread depth left (inside): 50%; Tire tread depth left (outside): 50%; Tire tread depth right (inside): 50%; Tire tread depth right (outside): 50%; Suspension: Air suspension Rear axle 1: Tire size: 315/80R22.5; Double tires; Max. axle load: 9500 kg; Tire tread depth left (inside): 50%; Tire tread depth left (outside): 50%; Tire tread depth right (inside): 50%; Tire tread depth right (outside): 50%; Suspension: Air suspension Rear axle 2: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steerable; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Air suspension GVWR: 32,000 kg Technical condition: good Optical condition: good

Condition: good (used), mileage: 361,600 km, power: 309 kW (420.12 HP), first registration: 02/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x2, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2017, Equipment: AdBlue, = Additional Options and Accessories = - PTO = Notes = Coming soon; MAN TGS 35.420 8x2*4 - HMF container system - Euro 6 - Automatic Year of manufacture: 27-02-2017 Mileage: 361,600 WMA90SZZ8HM732811 HMF container system Side tipper Euro 6 = Further Information = Itedpfx Aozfvf Dea Ieh Technical Information Number of cylinders: 6 Axle Configuration Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steerable; Tire tread left: 40%; Tire tread right: 40% Front axle 2: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steerable; Tire tread left: 40%; Tire tread right: 40% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13000 kg; Tire tread left (inside): 80%; Tire tread left (outside): 80%; Tire tread right (inside): 80%; Tire tread right (outside): 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Lift axle; Max. axle load: 10000 kg; Tire tread left (inside): 30%; Tire tread left (outside): 30%; Tire tread right (inside): 30%; Tire tread right (outside): 30%; Suspension: Air suspension Weights Unladen weight: 12,150 kg Payload: 19,850 kg GVWR: 32,000 kg Condition Technical condition: good Optical condition: good

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2005, loading space length: 13,620 mm, loading space width: 2,500 mm, loading space height: 3,020 mm, total length: 13,910 mm, total width: 2,550 mm, suspension: air, tire size: 445/45 R19.5, tire condition: 30 %, wheelbase: 9,010 mm, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes = More information = Axle configuration Tyre size: 445/45 R19.5 Make axles: SAF Tyre profile: 30% Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Itodpfxszd R Dlj Aa Ish Empty weight: 8.340 kg Carrying capacity: 31.660 kg GVW: 40.000 kg Maintenance APK (MOT): tested until 01/2027 Identification Registration number: OR-51-PJ

Condition: ready for operation (used), Year of construction: 2011, overall weight: 235 kg, load capacity: 16 kg, arm reach: 1,611 mm, number of axes: 6, This 6-axis KUKA KR 16-2 mit KRC 4 was manufactured in 2011. It features a load capacity of 16 kg and a range of 1611 mm, making it suitable for various applications. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 16-2 mit KRC 4 robot arm we have for sale. Contact us for further details. • Machine Weight: 235 kg • Rated Payload (Load): 16 KG • Max Reach (Range): 1611 MM Itsdpszficpofx Aa Ish • Controller Model: KRC4

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 148 h, load capacity: 5,000 kg, lifting height: 4,885 mm, free lift: 2,270 mm, fuel type: electric, mast type: triplex, construction height: 3,300 mm, empty load weight: 8,835 kg, drive type: Elektro, Electric four-wheel forklift Load center: 600 Mast type: Triplex Technical condition: very good Front tire type: Solid rubber Itsdpfx Aaszdwbwj Ieh Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year of manufacture: 2017 Battery condition: 80 - 100% Description: The vehicle will be inspected according to UVV regulations. Before delivery, the machine will undergo servicing and cleaning. Upon request, the machine can be repainted for an additional charge. Side shifter, 3rd valve, rear work light, front work light, full cabin, full free lift.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 817 h, load capacity: 3,000 kg, lifting height: 6,430 mm, free lift: 2,044 mm, fuel type: electric, mast type: triplex, construction height: 2,824 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 625Ah Battery type: PzS Itodpfxoy N E Eks Aa Ijh Battery year of manufacture: 2019 Side shifter, 3rd valve, rear work light, front work light, heater, full cabin, full free lift, joystick, seat.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Itedpfx Aaey H Dblj Ieh Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2020, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Renders Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 Maintenance, history and condition Number of owners: 5 Technical condition: good Visual appearance: good Itjdpfey Nwpzjx Aa Ioh Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), mileage: 232,134 km, power: 235 kW (319.51 HP), first registration: 05/2011, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 6x2, wheelbase: 5,250 mm, fuel: diesel, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 5,050 mm, loading space width: 2,420 mm, loading space height: 880 mm, Year of construction: 2011, Equipment: ABS, AdBlue, EBS, airbag, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, power mirror, traction control, = Additional Options and Accessories = - Outside thermometer Iodpfx Aaozdyquo Ijth - Heated mirrors - Co-driver's seat - Leaf spring suspension - Car kit - Sunroof - Differential lock - Digital tachograph - Rear doors - Lift axle - Air suspension - Air-suspended seats - Radio/CD player - Rearview camera - Side door - Sun visor - Stability control - Toolbox - Power take-off (PTO) = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 10,518 cc Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/55 R 22.5; Max. axle load: 8000 kg; Steered; Tire tread depth left: 70%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Rear axle 1: Double tires; Differential lock; Max. axle load: 11,500 kg; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered; Tire tread depth left: 90%; Tire tread depth right: 70%; Suspension: Air suspension Weights Unladen weight: 14,100 kg Payload: 12,900 kg GVW: 27,000 kg Functional Crane: HMF 1300 K2, year of manufacture 2011, behind the cab Body manufacturer: Hyva Tipper: Left / Rear Maintenance, History, and Condition APK (Technical Inspection): valid until 11/2026 Technical condition: very good Optical condition: very good Identification License plate: BZ-GD-95

Condition: ready for operation (used), Year of construction: 2012, load capacity: 16 kg, arm reach: 3,102 mm, number of axes: 6, This 6-axis KUKA KR 30L16-2 mit KRC 4 was manufactured in 2012. It features a reach of 3,102 mm and a payload capacity of 16 kg, making it suitable for various robotic handling applications. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30L16-2 mit KRC 4 robot arm we have for sale. Contact us for further details. • 3 units available • Application Type: Robotic Handling / Material Handling Robot • Controller: KRC 4 Itedpfxezd Tl Eo Aa Ish • Payload Capacity: 16 kg • Max Handling Weight: 16 kg • Reach: 3,102 mm • Weight: 700 kg

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 3,000 kg, lifting height: 4,800 mm, free lift: 1,170 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 – 4,999 kg Mast type: Triplex Iedpfxjy Hyk Ne Aa Ieth Transmission: Automatic Condition: New equipment Technical condition: New Battery voltage: 80V Battery type: Lithium-ion Battery year: 2026 Description: Brand-new machine including 12 months warranty. Anton is a collaboration with EP Forklift (China) and is suitable for light-duty applications. Battery: New Li-ion including integrated charger. Affordable transport can be arranged on request. Lease-purchase is generally possible! We are an official Jungheinrich partner. Sideshifter, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, full free lift, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,599 h, load capacity: 2,000 kg, lifting height: 4,400 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Iedpszdlvpjfx Aa Isth Mast type: Triplex Transmission: Automatic Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery year of manufacture: 2019 Description: Price includes a new UVV inspection. Paintwork in very good condition (original). The 2019 battery will be regenerated using a power cycler including a Kappa test. Charger included with connector. We will gladly arrange cost-effective transportation for you. A lease-to-own option is generally available! We are an official Jungheinrich partner. Side shifter, 3rd valve, rear work lights, front work lights, STVZO compliant, full free lift, CE certificate, safety light.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, load capacity: 1,600 kg, lifting height: 5,650 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 3,450 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Itedpfszdltzsx Aa Ieh Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: 80 - 100% Side shifter, 3rd valve, rear work light, front work light, full cabin, joystick, LED, seat.

Condition: ready for operation (used), Year of construction: 2017, overall weight: 700 kg, load capacity: 16 kg, arm reach: 3,102 mm, number of axes: 6, This 6-axis KUKA KR 30L16-2 mit KRC 4 was manufactured in 2017. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30L16-2 mit KRC 4 robot arm we have for sale. Contact us for further details. • Application Type:Robotic Handling / Material Handling Robot Ijdpfx Aezd Taisa Ijth • Controller: KRC 4 • Payload Capacity: 16 kg • Max Handling Weight: 16 kg • Reach: 3,102 mm • Weight: 700 kg

Condition: new, - Dimensions: 910 x 860 x 550 mm - Internal dimensions: 610 x 610 x 170 mm - Weight: 51 kg - Power: 8 kW - Power supply: Natural gas + 230V~ electrical connection - Capacity: 4 pizzas with a 30 cm diameter - Professional oven, ideal for pizzerias with high demand - Designed to offer efficiency, safety, and stability - Fast heat-up thanks to its specially designed chamber - Stable temperature even with heavy use (frequent opening and closing) - High-precision safety thermostat for reliable adjustment - Bakery-style door for easy loading and unloading - Natural gas consumption: 0.844 m³/h - Thermal power: 6880 kcal/h Itedpfx Aaoy S R Ips Ijh

Condition: excellent (used), -Dimensions: 1440x2700x2600mm -Chariot 600x800 -N°série:9300041424 -Modèle:E8.64 -Année:06/2016 Itodpfx Aaewxmfws Ijh -Surface au sol: 2,71 m2 -Température max: 280°C -Passage de porte: 830 mm -Puissance de chauffe: 57kW -Tension:400V

Condition: used, - Condition: Used Itsdpfswxynljx Aa Ioh - Dimensions: 1216x850x2200mm - Serial No.: 101293/A - Model: ECNB1042E - Shelves: 600x400mm - Temperature: 18°-22°C - 4 doors - Refrigerant: R404A - Power: 1.4 kW - Voltage: 22V - Weight: 245kg - Refurbished equipment: The equipment is prepared upon order; collection and return times are agreed at that time (please request price after refurbishment)

Condition: excellent (used), - Overall dimensions (LxWxH): 1875x2780x2200 mm Ijdpfewxmq Hox Aa Ioth - Baking chamber dimensions (LxW): 1240 x 2140 mm -Model: Elettrodr 10.6/124x214-4 - Number of decks: 4 - Baking surface: 10.6 m² - Voltage: 400 V - Electrical power: 50 kW - Year of manufacture: 2012 - Weight: 7600 kg - With scissor lift - Serial number: 1206160/BN/0851 - Refurbished equipment: The equipment is prepared upon order; delivery and return times are agreed upon at that moment (please request price after refurbishment).

Condition: excellent (used), - Model: Oméga PREMIO 4 mouths - Brand: BONGARD - Dimensions (W x D x H): 1645 x 2301 x 3024 mm - Mouth size (W x D): 800 x 2000 mm - With integrated lifter - Front with stainless steel hood and electric heating elements - Glazing treated to reduce heat loss - Power: 33 kW - Voltage: 400 V 3-phase / 50 Hz - Weight: 1600 kg - Serial number: 14425532 Iedpfx Aewxmrqea Ijth - Year of manufacture: 2009

Condition: used, -Dimensions: 1620x2225x2300 mm -Serial no.: 12026399 -Model: Omega 4 -Slab size: 801x1840 mm -Year: 2007 -Baking surface: 5.9 m² -Max. temperature: 300 °C -Integrated loader/lifter -Voltage: 400V -Power: 27 kW -Weight: 1590 kg -Overhauled equipment: equipment is prepared upon order; collection and return deadlines are agreed at this time (please request price after overhaul) -Front panel with brushed stainless steel hood Itjdpfx Aey H D A Aea Ioh -Heavy-duty refractory cement baking decks, 20 mm thick -Stainless steel sheathed electric heating elements -1 independent relief damper per deck -1 independent steam generator per deck -Thermal treated glass to reduce heat loss -Steam unit and column always on the same side -Equipped with steam extractor for the hood -Insulation by cross-laid rock wool panels -High-temperature silicone cable wiring harnesses

Condition: excellent (used), -Dimensions: 1440x2700x2600 mm -Trolley: 600x800 Iedpowxmf Dsfx Aa Ieth -Model: E8/64 -Serial number: 9300038973 -Year: 04/2016 -Footprint: 2.71 m2 -Maximum temperature: 280°C Lroyjwxmf De Tdxuger -Door clearance: 830 mm -Heating power: 57 kW -Voltage: 400 V -Weight: 1270 kg