Used 4 Colors for sale (60,157)

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Iodpfsfdkb Tex Aaloap - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm Ijdpfxed Tqale Aaleap - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Iaedpefdkb Ujfx Aaljp The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Iodpfsguk Dksx Aaljap - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Isdpfefdkbhox Aaleap Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Isdpfx Aasguk Dveljap The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 1995, still preserved CNC because little in use was used for door production , but can be used for any purpose . Double table, can be mounted from left and right side 4 axes x 5000 mm y 1350 mm z 450 mm a 190° main spindle SK 40 8 kw water cooled up to 17 000 rpm Iaodpjig T Epefx Aalsp chain magazine with 24 places

Condition: excellent (used), Year of construction: 2011, WEISHAUPT WM-G10/A-4; With gas train - Power: 110-1250 kW - Year of manufacture: 2011 Ijdpfjwgym Dex Aalsap - Design: ZM

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads Iodel Dw Nxepfx Aaljap long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments Iaedecw Dg Depfx Aalsp GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement. Iodev Ukz Aepfx Aalsap

Condition: good (used), Production: alloyed Tip: 4 sec Turntable Iasdpeuhn Dcefx Aaljp

Condition: good (used), Manufacture: ALLOYD Iasdpjuhn Diofx Aalep Tip: 4 seec Turntable

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Iajdep U Umkepfx Aaljp

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Ijdpfxeyddqme Aaljap Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Table system Pod and rail table: available Consoles: 6 MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: new, Year of construction: 2007, machine/vehicle number: 0711ST0619, functionality: fully functional, feed rate X-axis: 13 m/min, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Format 4 Felder Perfect 40! TECHNICAL DETAILS Feed rate: 13 m/min Maximum material thickness: 3 mm Main trim saw motor power: 0.5 kW Main trim saw motor speed: 12,000 rpm Trimming and profile unit motor power: 0.68 kW Trimming and profile unit motor speed: 12,000 rpm Polishing unit motor speed: 1,400 rpm Isdeyddmnepfx Aaljap MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3N Frequency: 50 Hz Power: 8 kW EQUIPMENT Guillotine for edging material up to 3 mm Teflon-coated glue pot for 3 kg EVA granulate Audio generator Glue roller with quick-change system Pneumatic pressure unit, 1 driven and 2 conical pressure rollers End trim saws with carbide-tipped blades Z = 24, d-100 x 20 x 3.2 mm Trimming and profiling unit with foldable option up to 15° Edge scraper for R = 2 mm Polishing unit with 2 motors

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Ijdpexwnw Ajfx Aaloap Art studio Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER ALL ARE NEW , OUT OF THEIR BOXES.

Condition: new, SALES FROM STOCK Loading Capacity: 240 kg Max Platform Height: 4 m Occupants: 1 Platform Dimension: 1.15 x 0.6 m Overall Length: 1.32 m Overall Width: 0.76 m Overall Height: 1.92 m Platform Extension: 0.55 m Extension Load: 100 kg Ijdpjulah Njfx Aaleap Up/Down Speed: 34/25 sec Turning Radius: 0 Maximum Slope: 1.5°/2° Drive Tyres: 230 x 80 mm Gradeability: 25% Wheel Base: 1.0 m Travel Speed (Stowed): 4 km/h Travel Speed (Raised): 0.5 km/h Battery: 2 x 12 V / 100 Ah Lifting Motor: 24 V / 1.3 kW Drive Motors: 24 V / 0.5 kW Charger: 24 V / 15 A Weight: 660 kg Proportional Controls Automatic Pothole Protection Drivable At Full Height Non-Marking Tyres Automatic Brake System Emergency Lowering System Emergency Stop Button Cylinder Holding Valve Onboard Diagnostic System

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required Ijdpoypbx Eefx Aaleap MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: reconditioned (used), functionality: fully functional, HYMO 4-tonne capacity lift table. Table area 1400 x 1000mm Previously refurbished and little used since. 2 units available Iaedpoyt Irmefx Aalop Price each €1200

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1270 x 508 x 635mm, Spindle nose to Table: 102 – 737mm, Table 1324 x 457mm, Spindle speed 7500 rpm, Spindle taper BT40, Spindle Motor 40Hp, HAAS Control, 20 Station ATC, Iedpfxsyt Hf Sj Aaljap Programmable Coolant nozzle, swarf auger, Low Volt light

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 20224, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, overall weight: 320 kg, belt width: 50 mm, grinding belt length: 4,300 mm, Equipment: rotational speed infinitely variable, ✨ 2011 Ciclope Altair 4-2V AP Polishing Machine – For Sale in Ireland (Very Good Condition) Now available in very good condition, this 2010 Ciclope Altair 4-2V AP Polishing Machine offers high-performance surface finishing for demanding metal fabrication environments. Known for precision, durability, and efficiency, this Italian-made industrial polishing system is ideal for stainless steel, aluminium, brass, and a wide range of non-ferrous materials. Whether you're polishing flat plates, tubes, or complex components, the Altair 4-2V AP delivers consistent, high-quality results – perfect for decorative and technical metal finishing. Iedpfx Aajwqrhusljap ✅ Key Features – Ciclope Altair 4-2V AP (2011) Year of Manufacture: 2011 Condition: Very Good – Fully tested and operational Model: Altair 4-2V AP Polishing Heads: 1 (Variable Speed) Head Type: Vertical polishing unit with pressure control Motor Power: 3 kW Belt Length: 4300mm Belt Width: 50mm Belt Speeds: 600 to 3000rpm Machine Weight: 320kg Variable Speed Drive (2V): Fine control of polishing intensity Automatic Pressure Control (AP): Consistent contact and finish Application: Surface preparation, finishing, and mirror polishing Build: Heavy-duty welded steel frame with vibration damping Operator Panel: Ergonomic control panel with emergency stop Dust Extraction Ports: Integrated system compatibility 🧰 Applications Sheet metal finishing Tube polishing and deburring Stainless steel and aluminium decorative polishing Precision finishing of architectural and structural components Mirror finishing for high-end applications 📦 Machine Includes Altair 4-2V AP polishing machine base unit Single polishing head with pressure adjustment Electrical control panel Belt mounting system CE-marked safety systems 📍 Located in Ireland – Ready for Immediate Sale This machine is in stock in Ireland, and available for immediate viewing and dispatch. We provide shipping and setup support across Ireland, UK, and Europe. 📞 Contact Us Today Looking for reliable and efficient metal polishing equipment? This Ciclope Altair 4-2V AP is a powerful and cost-effective choice for your workshop or production line. Ciclope Altair 4-2V AP Polishing Machine for sale Used Ciclope metal polishing machine Ireland Industrial surface finishing equipment Automatic polishing machine for stainless steel Variable speed polishing machine for metal Sheet and tube polishing system Italian metal polishing equipment in Ireland Metal finishing machine for aluminium and brass Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 19973, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, overall weight: 320 kg, belt width: 50 mm, grinding belt length: 4,300 mm, Equipment: rotational speed infinitely variable, ✨ 2010 Ciclope Altair 4-2V AP Polishing Machine – For Sale in Ireland (Very Good Condition) Now available in very good condition, this 2010 Ciclope Altair 4-2V AP Polishing Machine offers high-performance surface finishing for demanding metal fabrication environments. Known for precision, durability, and efficiency, this Italian-made industrial polishing system is ideal for stainless steel, aluminium, brass, and a wide range of non-ferrous materials. Whether you're polishing flat plates, tubes, or complex components, the Altair 4-2V AP delivers consistent, high-quality results – perfect for decorative and technical metal finishing. ✅ Key Features – Ciclope Altair 4-2V AP (2010) Year of Manufacture: 2010 Condition: Very Good – Fully tested and operational Model: Altair 4-2V AP Polishing Heads: 1 (Variable Speed) Head Type: Vertical polishing unit with pressure control Motor Power: 3 kW Belt Length: 4300mm Belt Width: 50mm Belt Speeds: 600 to 3000rpm Machine Weight: 320kg Variable Speed Drive (2V): Fine control of polishing intensity Automatic Pressure Control (AP): Consistent contact and finish Application: Surface preparation, finishing, and mirror polishing Build: Heavy-duty welded steel frame with vibration damping Operator Panel: Ergonomic control panel with emergency stop Dust Extraction Ports: Integrated system compatibility 🧰 Applications Sheet metal finishing Tube polishing and deburring Stainless steel and aluminium decorative polishing Precision finishing of architectural and structural components Mirror finishing for high-end applications 📦 Machine Includes Altair 4-2V AP polishing machine base unit Single polishing head with pressure adjustment Electrical control panel Belt mounting system CE-marked safety systems 📍 Located in Ireland – Ready for Immediate Sale This machine is in stock in Ireland, and available for immediate viewing and dispatch. We provide shipping across Ireland, UK, and Europe. 📞 Contact Us Today Iodpfx Aaswqrgkoljap Looking for reliable and efficient metal polishing equipment? This Ciclope Altair 4-2V AP is a powerful and cost-effective choice for your workshop or production line. Ciclope Altair 4-2V AP Polishing Machine for sale Used Ciclope metal polishing machine Ireland Industrial surface finishing equipment Automatic polishing machine for stainless steel Variable speed polishing machine for metal Sheet and tube polishing system Italian metal polishing equipment in Ireland Metal finishing machine for aluminium and brass Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 65/2/158/02, throat depth: 280 mm, table length: 580 mm, total width: 820 mm, pressing force: 65 t, stroke length: 120 mm, punching force: 65 t, Used 65ton mechanical power press for sale Isdpfx Aajxqn Unsljap Video at the bottom of this listing MODEL 65 CNR 4 SERIAL N° 65/2/158/02 NOMINAL FORCE (Max stroke) 650 [ KN] MACHINE WEIGHT 5000 [ daN] NOMINAL SPEED 73 [ C/min ] VARIABLE SPEED MIN/MAX [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 36 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 [ bar) MAXIMUM STOPPING TIME 0,154 SAFETY DISTANCE 246 [ mm ] FLYWHEEL ENERGY 3440 [ KJ] STROKE LENGTH MIN/MAX 10 / 120 [ mm ] RAM ADJUSTMENT 100 [ mm ] SHUT HEIGHT S.D.A.U. 320 [ mm ] MAXIMUM EJECTOR STROKE 40 [ mm] TABLE SIZE 68 / 580 / 820 [ mm ] RAM SIZE 340/ 470 [mm] TOOL SPIGOT DIA 45 [ mm ] THROAT DEPTH 280 [ mm ] MAX TOOL SIZE 340 / 470 [ mm ] MAX TOP TOOL WEIGHT 136 [ daN]

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 100/2/173/02, throat depth: 330 mm, table length: 950 mm, stroke adjustment: 10 mm, total width: 660 mm, pressing force: 100 t, stroke length: 130 mm, punching force: 100 t, Used 100ton mechanical power press for sale complete with sheet metal feed system Video at the bottom of the listing MODEL 100 CNR 4 SERIAL N° 100/2/173/02 NOMINAL FORCE (Max stroke) 1000 [ KN] MACHINE WEIGHT 7000 [ daN] NOMINAL SPEED 65 [C/min ] VARIABLE SPEED MIN/MAX 30/90 [ C/min ] Iaodpfxoxqn Twj Aalop MAXIMUM CLUTCH ENGAGEMENTS 22 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 ( bar ] MAXIMUM STOPPING TIME 0,195 [s] SAFETY DISTANCE 312 [ mm] FLYWHEEL ENERGY 8493 [KJ ] STROKE LENGTH MIN/MAX 10 / 130 (mm ) RAM ADJUSTMENT 100 [mm ] SHUT HEIGHT S.D.A.U. 370 [ mm ] MAXIMUM EJECTOR STROKE 55 [ mm ) TABLE SIZE 68 / 660 / 950 [mm ) RAM SIZE 450 / 540 ( mm) TOOL SPIGOT DIA 60 THROAT DEPTH 330 [mm / MAX TOOL SIZE 450 / 540 ( mm] MAX TOP TOOL WEIGHT 180 ( daN]