Used 4 Axis Cnc Milling Machine for sale (100,942)

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Cedsym Nbcjpfx Agzogp Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Cgsdpeym I U Iefx Agzsp Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Cgodpfx Agoygw E Nezsp Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control unit: HEIDENHAIN TNC 426 Work area X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Tool holder: SK 40 Cgodpfxev Rxa Ss Agzjp M & H 3D probe (for workpiece measurement) Vertical-horizontal milling device Quill for drilling Coolant system Universal tilting table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH): approx. 3,900 x 2,000 x 2,000 mm æ25226

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control system: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Cjdpfov Rpr Sex Agzjgp Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: good (used), Year of construction: 2012, 5-Axis CNC Machining Center Manufacturer: AXA Machine Model: VPC-2800U Control System: Siemens Year of Manufacture: 2012 Technical Specifications Working Area - X travel vertical (mm): 3,900 - Y travel (mm): 2,940 - Z travel (mm): 1,100 CNC Rotary Table - Clamping area (mm): ø 2,800 Feed Drive - Max. rapid traverse speed in X/Y/Z (m/min): 30/30/25 Working Spindle - Standard drive No.: 140 Spindle speed range (rpm): 30-7,500 Spindle power max. duty cycle 100% (kW): 63 Spindle torque max. duty cycle 100% (Nm): 191 Tool holder: SK50 Swivel Head - Swivel range B-axis (degrees): 90 - Indexing: freely interpolating Tool Changer - Tool stations: 60 Cjdpfx Agjyk T Emozogp Please note: The machine is NOT equipped with a turning function. Changes and errors in the technical data and information excepted.

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Csdpfx Ajquhbgogzogp Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations Cgedpfx Asutuyiegzop - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Cedpfx Agow Ed U Nozogp Machine comes from a showroom with very few operating hours.

Condition: used, CNC tool milling machine MAHO type MH 400 E Machine No. 43072 Year of construction 1989 travel X: 400 mm Y: 250 mm Z: 375 mm table size 700 x 270 mm distance spindle nose / table max. 410 mm tool holder ISO 40 with draw pin type B Cgsdpfeh Ic Ufex Agzop spindle speed 80 - 4000 rpm. 18 steps feed speed 1-1500 mm/min. infinitely variable Rapid traverse (X, Z and Y) 2,5 m/min. Pinol shift vertical 50 mm spindle drive 2,2 kW mains connection 400 Volt, 50 Hz, 19 kVA - swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping - swiveling device for the vertical milling head - Splash guard cabin as table enclosure with 3 folding doors - Electrical control cabinet fixed to the machine - Interface V24 (RS 232) for data transmission - 52470 operating hours, main switch on - rigid angular table - coolant unit with coolant pump adjacent under the machine - central oil lubrication Vogel - operator's manual, electrical circuit diagram space requirement L x W x H 2250 x 1800 x 1850 mm weight approx. 1,5 ton. good condition

Condition: used, Year of construction: 2001, CNC Fixed Bed Milling Machine CORREA type CF 17 D Year of construction: 2001 Travel X: 2000 mm Travel Y: 800 mm Travel Z: 800 mm Cgsdpfxjyrf H Es Agzjp Numerical Command: HEIDENHAIN 426 Spindle: ISO 50 Spindle speed: from 20 to 3000 RPM Table size: 2000 x 700 mm Max weight on table: 3500 kg Spindle motor: 17 kW Dimensions (L x W x H): 5300 x 2900 x 2800 mm Weight: 9 T

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Cgodpfx Agsyha Atozsp Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Codpfx Aety A Ehsgzjgp Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Cgodpfsxtmqtox Agzop Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Center height: max. 190 mm Center distance: max. 580 mm Turning diameter: max. 200 mm Longitudinal slide travel (Z-axis): max. 450 mm Cross slide travel (X-axis): max. 160 mm Spindle bore through draw tube: 51 mm Spindle bore at front bearing: 100 mm Spindle speed: max. 5000 rpm Feed rate for X and Z axes: mm/min Rapid traverse rate X-axis: 30 m/min Rapid traverse rate Z-axis: 30 m/min Feed force X and Z: 4500 Nm Turret: 12 stations Driven tool stations: 6 stations Tool holder: cylindrical, VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Electrical connection: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis (chuck position) and C1-axis for tool turret - 3-jaw power chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - Hydraulic hollow chucking device AUTOGRIP - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 of which are driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measuring system via rotary encoder - Chip conveyor with integrated coolant system Codpfxeyk Hrgs Agzegp - Workpiece remaining run-time display and part counter as large display on machine enclosure - Electrical cabinet cooling unit - 9716 total operating hours (main switch on), of which 3322 spindle hours, as read from the meter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4500 x 2600 x 2050 mm Basic machine footprint (L x W x H): 2900 x 2150 x 2050 mm (3200 kg) Chip conveyor footprint (L x W x H): 3350 x 850 x 1650 mm (500 kg) Weight: approx. 4 tons Very good condition

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, X-axis 1,500 mm Y-axis 660 mm Z-axis 600 mm Codpfexm Tufjx Agzegp Table size 1,680 x 660 mm Spindle speed 12,000 rpm Tool holder SK40 Tool changer 24 positions Control ULTIMAX 4 Incl. 4th axis Kitagawa MR 200 (rotary axis + tailstock) Incl. chip conveyor Incl. internal coolant (IKZ)

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Cgodpfxsxtbkuo Agzsp Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Cgjdpfevvi R Eex Agzop Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2004, Make: MAZAK Type of machine: INTEGREX 300-3ST Year of manufacture: 2004 Cgedpfx Aoyh I Rvegzsp Control system: Mazatrol 640 CNC-Steuerung Machine's weight: 14.200 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: ready for operation (used), Year of construction: 2008, Make: MAZAK Type of machine: INTEGREX 300-4ST Cgedjyh I Tdopfx Agzjp Year of manufacture: 2008 Control system: Mazatrol Matrix Machine's weight: 13.900 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Cgsdsyddk Tspfx Agzsp Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Cgjdpfxow Nklhe Agzep Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Cgodpew A Af Ijfx Agzop Weight 2900 kg Good condition

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: VMX42, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,050 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 11 m/min, controller model: HURCO SingleMAX, HURCO VMX42 CNC Milling Machine with MAX Control System Manufacturer: HURCO Model: VMX42 Year of manufacture: 2006 Original price: €88,000.00 net (€104,720.00 gross) Working Area Travel X-axis: 1060 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Distance spindle nose to clamping table: 150 - 760 mm Table clamping surface: 1270 x 610 mm Table load, evenly distributed: 680 kg T-slots in table (DIN 650): 5 T-slot width: 18 mm (H8) Slot spacing: 100 mm Drives Main drive-spindle Drive type: Three-phase motor Power (1 min duty cycle): 21.0 kW Max. torque at: 1450 rpm Torque at 1 min duty cycle: 142 Nm Feed drives Drive type: Three-phase motor Feed rates Cgedpfx Aeylbd Hogzjp Programmable: 3 - 7600 mm/min *contour-dependent Adjustable via console: 3 - 11,400 mm/min *contour-dependent Rapid traverse X, Y, Z axes: 30 m/min / 30 m/min / 20 m/min Spindle Head Tool holder: SK 40 DIN 69871 Drawbar: DIN ISO 7388/II Type B Speed range: 10 - 10,000 rpm Design Features Machine bed material: Cast iron Type of linear guides: X, Y, Z Central lubrication: 1 pump (X, Y, Z) Automatic Tool Changer Tool magazine type: Drum magazine Tool positions: 24 Tool diameter with full loading: 80 mm Max. tool weight: 7 kg Max. tool length: 300 mm Max. total weight: 82 kg Measuring Systems Type of measuring system: Photoelectric Standard: Rotary Mounting: Motor side Measuring method: Transmitted light Resolution Internal control: 0.0005 mm Measuring system: 0.001 mm Accuracy according to VDI/DGQ 3441 Positional accuracy over travel: +/- 0.01 mm Repeatability over travel: +/- 0.005 mm Cooling Coolant tank capacity: 340 liters Installation Data Length x width x height: 4650 x 3400 x 2770 mm Weight: 6,800 kg Electrical connection: 38 kVA / 55 A / 400 V Compressed air connection: 6 bar / 0.3 cbm/min Control HURCO SingleMAX 1 monochrome screen, 2 software units (1 x plain text dialog programming at the machine + 1 x for ISO code programming via external programming device or CAD/CAM system via RS-232 C or V 24 interface) Pentium technology, 1.6 GB hard drive, 8 MB RAM, parallel and serial data interfaces, DOS-compatible 3.5" 1.44 MB drive. System self-diagnosis, DOS directory structure Includes 1 x color screen Pocket milling with islands Synchronous tapping (thread cutting without compensating chuck) Detachable electronic handwheel DXF software: import of geometric data from DXF file and entry of technological data (tool number, radius correction, safety distance, machining depth and plunge feed) Accessories High-pressure cooling system for coolant supply through the spindle (coolant type: emulsion / coolant pressure 20 bar / integrated hydraulic tool clamping system). Cooling air switchable via coolant nozzles Chip splash guard cabin Machine lamp Machine manual on CD

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 Cedpfx Agextu H Njzsgp • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany