Used 20 Kv Transformer for sale (29,797)

Condition: used, empty load weight: 2,160 kg, maximum load weight: 180 kg, overall weight: 2,340 kg, axle configuration: 1 axle, first registration: 04/2001, total length: 3,900 mm, color: green, Year of construction: 2001, operating hours: 2,737 h, fuel type: diesel, gearing type: other, driver cabin: other, construction height: 2,960,000 mm, Equipment: car registration, low noise, * German device * 1st hand * Condition see photos * Lehmann floodlight unit consisting of power generator and light mast trailer * Original only 2,737 operating hours * Last inspection at 2,700 operating hours * Electro-hydraulically controlled telescopic mast * 9.50 m extension height * Lamp holder can be rotated 360° and swiveled 180 * 2 x halogen floodlights 2,000 W each * 4 x halogen floodlights, 1,500 W each * Own diesel generator/power generator with 20 kVA/16 kw * Connected voltage 230/ 400 V/ 50 Hz * 3 x earthed sockets 16 A * 1 x CEE attachment socket 400 V 16 A * 1 x CEE add-on socket 400 V 32 A * All sockets IPX7 * Trailer operation for cars and trucks (ball head and jaw coupling) * Transport height 2.96 m * 80 Km/h approval * All motion drives are identical and can be replaced in a few simple steps * GVW: 2,340 kg * Unladen weight: 2,160 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. Rjdpfxepk Awzj Adzocf You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, Year of construction: 2019, Type: ABB RESIBLOC Manufacturer's number: 14220171125-04 Rated power: 4200 / 1300 / 1300 / 1600 kVA Rated voltage: 11000 V / 410 V / 410 V / 729 V Rated current: 220.4 A / 1831 A / 1831 A / 1267 A Connection group: Dyn11yn11yn11 Year of manufacture: 2019 Frequency: 60 Hz Protection class: IP44 Cooling type: AFWF Winding material: Aluminum (Al / Al / Al – HV/LV) Insulation class: F / F / F / F (HV/LV) Impedance: % (no value on the nameplate) Current symmetrical short circuit: 1.67 / 29.56 / 29.47 / 1.10 / 16.66 kA Total weight: 8.6 t Max. ambient temperature: 45 °C Environmental / climatic / fire classification: E2 / C2 / F1 Insulation level: LI 75, AC 28 / AC 3 / AC 3 Rcodpfxswcug Re Adzef NEW - UNUSED I have 5 pieces

Year of construction: 2011, condition: used, Capacity 20 m3 5,5 kW 400 A Rcjdsiinryjpfx Adzsf Weight 5650 kg

Year of construction: 2016, condition: ready for operation (used), A continuous cooling tunnel MF-Hamburg is available. Cooling principle: radiation and convection cooling, working height: 920mm, belt width: 420mm, conveyor belt: PUM2 smooth belt, height adjustment: +/-15mm, infeed length: 2770mm, cooling length: 17000mm, overall length: 20250mm, overall width: 720mm, material: 1.4301. Documentation available. An on-site inspection is possible. Rcodpfx Aszmymzodzsf

Condition: new, Year of construction: 2026, new cast epoxy resin - distribution 3 phase transformers manufactured by TESAR Italy, 3 pcs 400kVA, 2 pcs 630kVA, 2 pcs 1000kVA, 1 pc 1250kVA, 2 pcs 2000, 1 pc 2500kVA 22000 ( ± 2 x 2,5 %) /400V; Dyn1/5/11 ( adjustable), IP00, losses Ecodesign tier2, project design documentation and rutine protocols, manuals, unpacked, 2 years warranty, available asap from our stock. Rcsdpfx Ashybc Njdzef

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 12,000 m/min, rapid traverse Z-axis: 12,000 m/min, controller manufacturer: FANUC, controller model: 0IMD, table width: 4,200 mm, table length: 1,650 mm, table load: 9,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 4,500 rpm, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 32, Vertical machining center gantry type. KENT BKV20-42 Year of manufacture 2015 CNC FANUC 0iMD Table Table dimensions: 4200x1650 mm T-slot/pitch size: 22x9x170 mm Max weight allowed: 9000 kg Capacity Longitudinal X-travel: 4200 mm Cross Y-travel: 2000 mm Vertical Z-travel: 900 mm Spindle nose: BT50 ISO Spindle speed: 30-4500 rpm. Rcodpfxeyu Svfo Adzef Motor power: 18.5-22 Kw Rapids X,Y,Z axis: 10000/12000/12000 mm/min Tool magazine 32 Specific properties Distance between colums: 2000 mm Distance from spindle nose to table: 40-940 +200 mm Increased heigth: 200 mm Machine dimension: 10.443x4330x4518 mm Machine weigth: 42.500 kg

Condition: used, Year of construction: 2009, operating hours: 49,800 h, machine/vehicle number: GZN00767, fuel type: gas, motor manufacturer: Caterpillar G3520C, General information Field of application: Construction Weights Empty weight: 17.500 kg Functional Generator capacity: 2.150 kVA Dimensions of cargo space: 7 x 2 x 27 cm Other information Fuel consumption: 8895 Btu/ekW-hr Generator: Caterpillar SR4B Frequency: 50 Voltage: 400 Drill equipment: Control Panel Additional information Please contact Team DPX for more information = Additional options and accessories = Rcjdpozpdn Usfx Adzsf - Control Panel

Condition: used, Year of construction: 2009, operating hours: 49,800 h, machine/vehicle number: CAT0000LGZN00768, fuel type: gas, motor manufacturer: Caterpillar G3520C, General information Field of application: Construction Weights Empty weight: 17.500 kg Functional Generator capacity: 2.150 kVA Dimensions of cargo space: 7 x 2 x 27 cm Other information Fuel consumption: 8895 Btu/ekW-hr Generator: Caterpillar SR4B Rcjdpozpdn Isfx Adzsf Frequency: 50 Voltage: 400 Drill equipment: Control Panel Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Rcjdpfx Aspy Uzysdzof Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 63 kVA, input current: 2 A, type of output current: AC, output voltage: 110 V, Equipment: documentation/manual, 63kVA transformer for sale 3x400V -> 1x110V Manufacturer: Trafó-Print Kft. Rsdpfx Adew Ev Ihezocf Type: TZ 63 000 Power: 63kVA Primary: 3x400V Secondary: 1x110V

Condition: excellent (used), You are bidding on: a branded machine - folding press, from a very reputable and well-known manufacturer - Schröder Rcodpfx Aey Hbv Tjdzsf Machine features: Folding press Schröder AKV Rail bends cleanly – test possible Angle display Bending length just over 2m Sheet thickness: 2 mm (steel sheet); for aluminum, zinc, etc., up to approx. 3 mm Standard rail – optionally also available with segmented rail (see picture)! Optional back gauge Matching guillotine shear available, e.g., Schröder 2m/3mm (see last picture), or Schechtl HT, Ras, etc. Current new price is approx. €20,000 net without accessories Important! Optionally, you can find and purchase many machines and machine accessories such as various rails, back gauge – everything related to sheet metal and steel processing, including folding presses, guillotine shears, drilling machines, slip rollers, slitting and profiling machines, accessories (beading tools, roll formers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available for any questions. You will receive an invoice according to § 25a UStG. Free loading is possible – weight approx. 1550 kg. Viewing and testing are possible and encouraged by telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise; we will be happy to advise you. Collection by the buyer (or a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item number: Folding Press Schröder AKV 260401

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Rcedpfx Adsznz Ezszef Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: refurbished (used), DALEX seam welding machine, transverse seam version Outreach: 350 mm Rated power: 160 kVA Secondary short-circuit current: 38.5 kA Secondary open-circuit voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-stage switch and auxiliary control unit with thyristor power stage and Rcsdpsdx Suhjfx Adzof synchronous welding control MPS 100 multi IMPORTANT NOTE – PLEASE PAY ATTENTION The above-mentioned performance data comes from the machine's nameplate. During inspection of the machine, it was found that a 200 kVA welding transformer had been installed by the previous owner. This changes the performance data.

Condition: good (used), Year of construction: 2004, load capacity: 3,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, Hyster H3.00XM Duplo 460 Sideshift / Cascade Fork Positioner Perkins Diesel 2004 Video available via Whatsapp. Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a changing inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can arrange a viewing and/or test drive without obligation. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Rjdeyk D Nispfx Adzscf

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, This FINI BSC 20 is a high performance screw compressor that delivers up to 10bar of max pressure with a 15KW electric motor. This compressor was purchased new and was serviced on a yearly basis by the locally trained Fini agents. Rodpfozlufpsx Adzecf It comes complete with an MTA air dryer unit.

Condition: good (used), Year of construction: 2012, operating hours: 9,380 h, load capacity: 3,000 kg, lifting height: 4,450 mm, mast type: duplex, construction height: 2,950 mm, Linde H30D-01 Duplo 445, Sideshift / Fork Positioner, VW Diesel, 2012 Video available via WhatsApp. Continuous stock, see website for current availability. Prices are ex Nuland. Rcsdpfx Adoympkwezsf Van de Wert Trading B.V. carries a varying stock of machines, trucks, trailers, and attachments. All deliveries are at trade prices in AS-IS condition with no warranties. (see our general terms and conditions) Viewings and/or test drives are possible by appointment without obligation. Please call in advance as we are not always on location. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2004, load capacity: 3,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, Hyster H3.00XM Duplo 460 Sideshift / Cascade Fork Positioner Perkins Diesel 2004 Rcsdpfxsynacto Adzsf Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and sold AS-IS without warranties (see our general conditions). To arrange a viewing and/or test drive you can make a non-binding appointment. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2014, operating hours: 10,600 h, Toyota 02-8FDF25 Triplo 500 Freelift / Sideshift / Fork Adjuster Diesel 2014 Rcsdpfxjzqmxro Adzsf A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, A Great machine for the most efficient and efficient production of windows and doors. Rsdpfszif Eujx Adzscf

Condition: good (used), Year of construction: 2011, operating hours: 12,400 h, Forklift LINDE H80D-01 duplo415 SIDESHIFT/FORK POSITIONER DEUTZ DIESEL 2011 Video can be sent via Whatsapp. Continuous stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) Rcsdpfsyrdraox Adzsf For a viewing and/or test drive, you can make an appointment without obligation. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 2,930 h, load capacity: 2,000 kg, lifting height: 3,670 mm, free lift: 105 mm, mast type: duplex, construction height: 2,365 mm, fork length: 1,150 mm, Linde L20 electric high-lift pallet truck in good condition for sale. The unit comes with a new traction battery and a new safety inspection certificate (UVV) upon delivery! TECHNICAL DETAILS Lifting height: 3,670 mm Load capacity: 2,000 kg Load center: 600 mm Free lift: 105 mm Fork length: 1,150 mm Rsdpfx Adezvgbdjzscf Fork width: 210 mm Fork thickness: 73 mm MACHINE DETAILS Mast type: Duplex Battery capacity: 375 Ah Battery voltage: 24 V Remaining battery capacity: 100% Battery model: PzS Operating hours: 2,930 h Overall height: 2,365 mm EQUIPMENT New battery Integrated charger Initial lift / ramp lift UVV / FEM 4.004, new upon delivery

Condition: used, Year of construction: 2008, * Deutz F4M2011 diesel engine * Meccalte ECO28 VL alternator * 400 V rated power Rcjdpfx Adszaib Aszof * 50 Hz frequency * 30.39 kVA prime power * AEZ GC M02-C control unit ----Vehicle number 11645 -----Errors and prior sale excepted

Condition: good (used), Year of construction: 2011, Schaffer - 2436 - shovel - wheel loader - 2011 - bucket - pallet fork Very well-maintained machine, free from defects. We have a continuous supply; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Rodpezd Ew Hjfx Adzecf

Condition: good (used), Year of construction: 2008, operating hours: 19,835 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,400 mm, Linde H40D Triplo 450 Freelift / Sideshift / Fork Positioner VW Diesel 2008 Video can be sent via Whatsapp. Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. holds a rotating inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices on AS-IS terms without warranties (see our general conditions). Rodpfeywu Spex Adzjcf You can schedule a viewing and/or test drive with no obligation. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Payload 5000KG / 5t payload / lifting load - 2-strand Rcsdpfxjrft Nze Adzef with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Complete weight approx. 120 kg, connection to 400V 50Hz Used Condition Item location is 75053 Gondelsheim See pictures