Used High Voltage Generator for sale (33,390)

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Operation & installation Manual available. Documents -PDF with rating of this 250 model relative to different purity level settings Bcjdpjxbta Djfx Af Eou The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment.

Condition: used, SPG. Regulator, generator control, generator voltage regulator, for generator, Bsdjb Uhtpepfx Af Eecu -Part No.: 49.2.777.0053E -Voltage: 3x 60V -Frequency: 50/60Hz -Number: 1x available -Price per piece -Dimensions: 170/160/H60 mm -Weight: 0.5kg

Condition: good (used), High-voltage motor, electric motor, three-phase asynchronous motor with squirrel-cage rotor Bcsdpfxjvvmn Us Af Eou -Power: 630 kW -Voltage: 10500 V -Speed: 1493 rpm -Shaft: Ø 65 x 140 mm -Design: B3 -Protection class: IP 54 -Documentation: everything available -Quantity: 1 piece available -Dimensions: 2440/1885/H1500 mm -Weight: 5000 kg

Condition: good (used), SPG. Regulator, generator control, generator voltage regulator, for generator, -Manufacturer: Nucleus, Generator DG1-1000 -Technical data: see photo of the nameplate Bcjdpfx Aoxnxdnef Eju -Number: 10x generator available -Price: per piece -Dimensions: 320/320/H95 mm -Weight: 4.2 kg/pc.

Condition: good (used), High-voltage system, high-current system, high-voltage system, transformer Bcjdpopy Rx Nsfx Af Eou -Manufacturer: Himmel, high-voltage system, high-current system -Type designations: Sky HG 64-25 KTSHigh frequency: 0.7 MHz -Rated power: 25 kW -Individual components/technical data: see photos, nameplate -Dimensions: 1605/880/H1840 mm -Weight: 830 kg

Year of construction: 2025, condition: new, functionality: fully functional, High frequency generator Schirmacher HS25000 The HF generator is used to generate a high-frequency electromagnetic field, which in a connected HF production device can be used to - Heat and weld thermoplastic plastics, - Dry paper products, textiles, wood and similar materials, - Heat plastic granulates, rubber and other materials. Technical data Operating frequency: 27,12 MHz Output power: 25 kW Power supply: 3 x 400V, 50Hz, Rated power 46 kVA Control: Generator: SPS Siemens S7 / Control electronics: SE68 Triode: RS3026 CL, alternatively ITL 12-1 Anode voltage: Full load 9,1kV, no load 10,4 kV Anode current: Full load 3.800 mA, no load 800 mA Bcedpfex U Trpox Af Esu dimensions (WxDxH): 1.200 x 1.200 x 2.000mm Commerical infromation Condition: new machine, from delivery stock – zero operating hours Manufacturer: Heinz Schirmacher GmbH, Trittau Availability: Available from stock, more than one unit in inventory Warranty: Available upon request Machine highlights Fast commissioning through modular design – flexible integration into various production processes and adaptation to different tools. Highly precise control – exact power delivery and consistently high welding quality. Highly dynamic HF regulation prevents extremely rapid flashovers in the welding process. Electrode protection – integrated into the generator to safeguard both machine and tool. Automation-ready – suitable for use in automated manufacturing processes with the capability to integrate into existing systems. Visits possible by arrangement.

Condition: as good as new (ex-display), High definition HD generator for plasma cutting. New never used from stock. Bcjdpfog Tcufox Af Eeu Ready for delivery except sold. Bargain.

Condition: as good as new (ex-display), Year of construction: 2011, power: 630 kW (856.56 HP), overall weight: 3,340 kg, ABB HIGH VOLTAGE INDUCTION MOTORS Motor Rotor Type 3-Phase Motor Power (KW:) 630 KW Bcjdpfoqctpgox Af Esu

Year of construction: 2001, condition: used, functionality: fully functional, SECOND-HAND H.F. GENERATOR ELETTRONICA CAVALLO MOD. GAF 50KW - CE RULES - Double exit - Year 2001 Bcedpfxex Rrlgj Af Eeu

Condition: ready for operation (used), Technical characteristics 150 bar hydraulic unit Bodpfx Aetgnivof Eecu useful dimensions 2600 mm x 1000 mm 6 horizontal single-acting jacks with flat or edge locking (clamping high parts) 2 vertical hydraulic pressers high frequency unit for rapid setting of glued assemblies 3 zone hydraulic control ideal for frames, panels, furniture element frames, stairs, fixtures Power and Motors Overall dimensions Lenght: 3000 mm Width: 1800 mm Weight: 1500 Kg

Condition: excellent (used), Chilworth JCI 164 High-Voltage Adapter General Description The JCI 146 is a voltmeter adapter component designed for integration into broader experimental systems. Combined with our JCI 140, the system enables the measurement of current-carrying conductors with voltages up to ±60 kV DC through direct connection with an accuracy of ±2% (nominal) and minimal loading effects on the device under test. The high input impedance and low capacitance of the JCI 146 are suitable for more accurate DC voltage measurements. Other conventional techniques for directly measuring high voltages (e.g., high-voltage meters, capacitive and resistive divider networks, etc.) often produce inaccurate results due to loading effects caused by the test setup. This device can be used to verify the calibration and accuracy of high-voltage sources by power utilities, calibration test houses, and cable manufacturers, to name a few applications. Features Direct measurement of live conductors up to ± 60 kV DC High-accuracy measurement with minimal loading effects Bedou Ehh Espfx Af Eocu Low input capacitance Very high input impedance, typically 10 13 ohms Can be used in a wider range of test and research systems Optional battery-powered and opto-isolated data acquisition module available for remote high-voltage monitoring. Specification Measurement: Maximum measurement voltage ± 60 kV DC Input impedance: Not less than 4.7x10 13 ohms at ± 50 kV Input capacitance: 32 pF (± 20%) (JCI 146 chamber only) Installation: Fixed installation (permanent ground connection required) Use: Used in Faraday cage environments (not included as standard) Accuracy: Nominal ± 2% Attenuation: 1/10 of the reading displayed on the JCI 140 For use with the JCI 140 static monitor and the JCI 165 data acquisition module Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2007, Low voltage synchronous generator - vertical - manufacturer Siemens, Czech Republic, 895kW, 400V, 1500 rpm, fully functional, all technical documentation and test report. Bcedpfx Aewmy Etjf Eeu

Condition: used, Year of construction: 2011, functionality: fully functional, Quick steam generator set - Jumag consisting of 3 quick steam generators including water softening system and chemical dosing system 1x Jumag DG 360 Volume: 60L Bedpfewn H Auex Af Eocu Operating pressure: 13 bar Max. heat output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year: 2011 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year: 2002

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. Bodpfsu Nzwuox Af Escu The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation Bcjdpfxox E T Uxo Af Esu (subject to changes and errors in technical data and information!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2013, total height: 2,220 mm, total length: 6,100 mm, total width: 2,350 mm, Weight: 6.000 kg Horizontal band saw machine High point HP-400 Year of construction 2013 Serial number 213-051 Saw wheel diameter 860 mm Maximum cutting width 400 mm Motor 22kW (30hp) (Per piece!) Conveyor belt in poor condition. - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 213-051 - Transport dimensions: 6100mm x 2350mm x 2220mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bcedpfxownhn Eo Af Eeu Yorick Diebels

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Length 1250mm, width 1550mm, height 940mm Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Hollow shaft or hole 110mm Bodpfx Ajv A Rppsf Eocu

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period. Bcsdpfjx U Tgmjx Af Esu

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 213-051, cutting width (max.): 400 mm, wheel diameter: 860 mm, TECHNICAL DETAILS Saw blade type: Horizontal Saw wheel diameter: 860 mm Maximum cutting width: 400 mm MACHINE DETAILS Bcodpfx Ajxmgq Tsf Esu Model: Hhepunkt HP-400 Year of manufacture: 2018 Serial number: 213-051 Motor power: 22 kW (30 HP) EQUIPMENT Conveyor belt (in poor condition)

Condition: like new (used), Year of construction: 2024, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: QYKM-1400x2900, total height: 3,200 mm, total width: 4,300 mm, total length: 7,600 mm, overall weight: 2,500 kg, Equipment: documentation/manual, We are selling our as-new pizza box machine due to business closure. The machine was ordered from China. It is nearly new and operates flawlessly. All components are fully functional. Coating can be applied at any time. Bcodexvy Hmepfx Af Esu

Condition: good (used), Year of construction: 2005, laser hours: 4,029 h, laser power: 2,000 W, We are offering a TRUMPF TCF1 generator and resonator. These components come from a portal 3D laser. The system was fully functional until it was dismantled 24 months ago. Since then, the components have been stored in a heated area. Bcedpfxev Ic Sao Af Eju

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Bcjdpfxexfrv Eo Af Eeu Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal Bodpswz Ukyofx Af Escu

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Bcedpfxswz Ufwo Af Eju Type: Two chucks

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM GAS generator set, CHP as option, Generator 10500V/50Hz Bcedpev Uag Iofx Af Eju