Shredder, Granulator, Separator

Mizar Recycling Machinery | CUA L3 - Cable Recycling Line

Condition: used, Year of construction: 1991, VECOPLAN VAZ 120/105-U Waste Shredder / Crusher For sale: VECOPLAN VAZ 120/105-U waste shredder, in almost new condition. The machine has been 2025 year completely overhauled and technically upgraded and is fully operational and ready for use. The shredder is equipped with a PLC control system, enabling fault monitoring and advanced control functions. A power meter is installed for efficient energy monitoring. The system operates fully automatically. When the machine is empty, it stops after a preset time, eliminating the need for manual shutdown. Once the crushing process is completed, the machine shuts down automatically. If the shaft becomes difficult to rotate, the press stops applying pressure while the rotor continues rotating. As soon as the shaft can rotate freely again, the pressing process automatically resumes without going to start pozition. This significantly improves operating efficiency and reduces unnecessary wear on machine components. If the load does not decrease, the press retracts. Should the load still remain high, the crusher shuts down automatically and indicates an overload condition, protecting the machine from damage and further wear. Technical Specifications: Itsdpfjt Dh T Dex Ah Eec • Machine type: VECOPLAN VAZ 120/105-U Waste Shredder • Application: shredding particleboard and solid wood, plastic, paper and similar waste • Drive power: 18.5 kW • Introduction: up to 1000 kg/h for particleboard waste • Screen diameter: 25 mm • Rotor: Ø 235 mm (circle), width 1070 mm, 120 rpm • Motor: Rated power: 18.5 kW Rated current: 36.5 A Speed: 1455 rpm Voltage: 400 V / 50 Hz Protection class: IP54, Type B3 • Drive system: V-belt drive with hydrodynamic turbo coupling (soft start, overload protection) • Hydraulic unit: Drive power: 1.0 / 1.4 kW Maximum pressure: up to 180 bar • Feed opening: 1200 × 1050 mm • Extraction nozzle: minimum air velocity 28 m/s Dimensions & Weight: • Weight: approx. 2300 kg Condition: fully operational after maintenance.

Year of construction: 2010, condition: used, Mettler Toledo PAS 3012 check-weigher with labeling machine. The labeling had can be electrically moved in all directions for an accurate positioning of the labels. Itsdoivnqcepfx Ah Eoc - Max. weight: 6KG - Min. weight: 0.020KG - E: 0,001KG - Rated for 70 packs per minute

Year of construction: 1987, condition: good (used), functionality: fully functional, Asitrade Singlefacer E-Flute and B-Flute Year: 1987 - completely overhauled in 2019 Itodpfotxlv Hex Ah Ejc Unwinder: 6-stations Max. working width: 1410 mm Max. speed: 150 m/min Sleeve: 100-140 mm Diameter: max. 1300 mm Water spray

Condition: new, Year of construction: 2023, total height: 1,850 mm, warranty duration: 12 months, input voltage: 380 V, power: 1.5 kW (2.04 HP), 1000L stainless steel mixer . All tanks are made to order . It is possible to make mixer from 100 to 3000 liters . Itedpfsqqhzfsx Ah Eec We make : Mixers , Heaters , Pasteurizers , Cheese boilers and others . The given price is an example .

Condition: like new (used), Gea CFS Koppens Thermal oil fryer BR 3500/600 Suitable for thermal oil heating; Net belt length: 3.500 mm Net belt width: 600 mm Machine dimensions (LxWxH): 6.000x900x1.600 mm Machine weight: 750 kg. Capacity: 250 kg/h in 600 liter oil Itjdpfx Aekvni Aoh Esc

Condition: new, filling capacity 300 kg max. workpiece height 500 x 200 x 20 mm workpiece weight total 200 kg max. workpiece weight 15 kg / Stck. revolutions per minute 22 U/min filling amount 40-50 % Colour blau 5015 RAL 0 625 x 270 mm total power requirement 1,5 kW weight of the machine ca. 650 kg range L-W-H 1 x 1,7 x 1,29 mm New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included in the price). This are available from Sideros. Sideros ECO dust extraction available at extra cost. Itsdpfju Uu T Rox Ah Ejc The manufacturer recommends taking 100 kg samples of the material to be deburred to be sent to the factory in Italy for test purposes before ordering. Machine dealer with own stock of 1600 m².

Condition: new, empty load weight: 880 kg, maximum load weight: 2,620 kg, overall weight: 3,500 kg, loading space length: 4,400 mm, loading space width: 1,830 mm, tire size: 195/50R13C, Disposal of bulk material, bulky waste, rubble, garden waste or similar and the delivery of building material, gravel, sand and firewood is made much easier with this skip container trailer. You place the skip or flatbed of the car trailer directly in the driveway or in front of the house for your customers. The building rubble from the old bathroom goes into the steel skip. This means that several construction sites can be managed simultaneously by one driver. With the hook and the built-in electro-hydraulics with radio remote control, the optional skips or flatbeds can be easily picked up and pushed off the car trailer. The trailer can also be used as a reverse tipper by operating the frame. When pulling up, the containers lock automatically and are secured against falling off the skip container trailer. Ijdpfx Ahoq Ru U Us Ejtc ATTENTION: Skip and platform are not included in the price! The skip trailer has the following as standard a hook with hydraulic ram, electric hydraulics and built-in battery, radio remote control, charger, 3 axles, support wheel, extremely stable welded frame and V-drawbar painted in dark gray. The skip body trailer is available with steel skips, flatbeds, grid attachment, tarpaulin & frame and anti-theft device as accessories.

Condition: ready for operation (used), Year of construction: 2021, An industrial pasta system Juwel for large-scale production of noodles and similar products is available. Components: drying cell TS-120, noodle machine Pressquick PQ6-SU and noodle machine Pressquick PQ3-SU. Drying baskets: 100, kettle capacity: 12kg, daily capacity: approx. 500kg, hourly capacity: approx. 50kg, total system dimensions X/Y/Z: approx. 2000mm/900mm/2100mm. Documentation available. An on-site inspection is possible. Iedpfx Aowd Tafjh Ejtc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For optimum recovery of non-ferrous metals or purification of materials Iodpfxevdqdij Ah Estc This extremely powerful machine is mainly used for processing household waste, shredder materials, household appliances, wood, plastic, glass, IBA and bed ash and electronic scrap. This IMRO non-ferrous metal separator stands up to the demands of very high recovery quotas and high purity levels.

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning Itjdpfx Ahjq D Dzlo Esc - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! -