Precision Sägenschränkapparat

Meinert PH 502 D

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series -Model: L-9060. -Material Thickness: 1.0 mm – 30.0 mm. -Maximum Material Width: 600 mm -Minimum Material Length: 145 mm. -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 26.000 kg. Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm. Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Bjdpfehwb U Tjx Afnswh Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm.

Condition: used, Year of construction: 2009, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bodpfxjwp Efds Afnjwh Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Tyop GA 250 Bodpfspl D Hxsx Afnswh

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 8292, grinding length: 3,100 mm, total width: 1,500 mm, total length: 5,100 mm, total height: 1,800 mm, grinding width: 200 mm, type of input current: three-phase, workpiece weight (max.): 1,000 kg, input voltage: 400 V, grinding spindle speed: 1,800 rpm, coolant pump power: 100 W, grinding spindle motor power: 1,100 W, overall weight: 2,500 kg, grinding wheel diameter: 200 mm, grinding wheel width: 20 mm, table height: 200 mm, table length: 3,100 mm, table width: 200 mm, control cabinet width: 400 mm, control cabinet length: 1,200 mm, control cabinet height: 1,500 mm, New machine, still in original packaging! Bsdpex Ezu Tofx Afnjwh

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Bedpfx Afoftdv Ujnowh Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Condition: new, K-280 sharpener is a device thanks to which you can professionally sharpen various types of grinder knives and plates in your plant. The sharpener is fully automated. The built-in programmer allows the user to program parameters such as time, thickness of cut and tempo. The device has a magnetic holder built-in. The machine is perfect for meat processing plants and the meat industry. Specification: Bodpfxed E I Ute Afnjwh Producer: BMG TRADE Model: K280 Dimensions: 1150 x 570 x 625 (mm) Power supply: 400V 50Hz Total motor power: 2.67 kW Cooling pump power: 0.12 kW Rotation: 2860 rpm Tank capacity: 33 L Thickness of cut: 0.2mm; 0.4mm; 0.8mm; 1.2cm; 1.6cm; 2,00cm Program of grinding pace Rotation: Right / left Weight: 400 kg

Year of construction: 1983, condition: ready for operation (used), Was used to rework profile rollers for a hot rolling mill, was regularly serviced, with accessories, without spare parts, on-site inspection is possible, no videos available. Bwodpfxeriwfie Afneh

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Bedpfxouz Hmxs Afnjwh Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Year of construction: 2025, cutting speed 35 m/s grinding height 210 mm workpiece length / mm weight of the machine ca. 210-260 kg required space 1100 x 760 x 860 mm The G115 Surface Grinder is a compact grinding machine designed for processing the circumference or face of the grinding wheel on the horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, inclined or shaped surfaces can also be processed. The machine is ideal for small businesses, maintenance industries, home workshops, laboratories, teaching demonstrations, and more. TECHNICAL DATA Maximum cutting amount: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Bsdpfx Afsvuuvksnewh Maximum grinding height: 210 mm Longitudinal stroke of the worktable: 340 mm Transverse travel of the worktable: 170 mm T-slot of the worktable: 1-12 mm Outer diameter × inner diameter × thickness of the grinding wheel: 180×32×13 mm Grinding head motor: 550 W/220 V Vertical feed handwheel interval: 0.025 mm Lateral feed handwheel interval: 0.02 mm Net weight / Gross weight: 210/260 kg Machine dimensions: 930×780×730 mm Package size: 1100×760×860 mm FEATURES The worktable can be moved back and forth as well as left and right. The grinding head can be raised and lowered vertically. High rigidity of the entire machine. The grinding head runs smoothly. Compact design with low noise. The machine is lubricated by a manual oil pump. To lubricate, simply pull out the handle. Work cabin is available separately. If you need any other special accessories to improve work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: From the proximal end of the main spindle to 100 mm, the radial runout of the tapered hole axis is 0.01~0.02 mm.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Bwjdpfx Asd H Hmhsfnsh Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT