Guide and feed spindle lathe stepless.

MCM Italy TC 300 x 1500

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-150°. With indication to accuracy on scale. The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does no change with the mitre angle. Positive stops at 30° + 45° left and right hand Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut. Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder Environmentally-friendly micro spray lubrication system Chip box inside Saw blade drive with end of cut stop Precise saw blade carbide-roller guidance Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment Hydraulic lift up of saw frame Model Manual Miter 30° left Ø 130mm; square 120x120mm 45° left Ø 200mm; square 180x180mm Nodpfx Aaebi S Dio Ejlk 90° Ø 260mm; square 300x260mm 45° right Ø 200mm; square 180x180mm 30° right Ø 130mm; square 120x120mm Motor:[kW] 1,8 Saw blade: [mm]3350x27x0,9 Speed: 35/75 m/min Working heigt:[mm] 900

Condition: used, mileage: 95,103 km, power: 62 kW (84.30 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2013, construction height: 1,970 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, Engine damage. The Volkswagen T5 Transporter 2.0 TDI is a used vehicle with engine damage and was first registered in November 2013. The vehicle has a mileage of 95,103 km and is equipped with a 2.0-litre diesel engine delivering 62 kW (84 hp). It complies with the Euro 5 emissions standard and features a manual 5-speed gearbox. This model is available in Ginstergelb (R1032) and offers seating for three occupants. The specification includes two sliding doors (left and right), as well as a wooden panel in the rear for securing cargo. With practical truck registration and a permissible gross vehicle weight of 2,800 kg, this Transporter is well-suited for commercial use. The T5's fuel consumption is 7.2 l/100 km (combined), 9.4 l/100 km (urban), and 6.0 l/100 km (extra-urban). The vehicle emits 190 g/km CO₂ and is fitted with a green emissions sticker (Class 4). Viewings are possible on weekdays from 8:00 am to 5:00 pm and on Saturdays from 9:00 am to 2:00 pm without an appointment. Sale only to businesses (agricultural, freelancers, small and large enterprises) or for export. Subject to error and prior sale. Nsdjtfa Rwopfx Aa Ejlk

Year of construction: 1983, condition: good (used), machine/vehicle number: 2103, max. bore of chuck: 1 - 20 Ø mm max. boring diameter: 20 mm mm Nlodpjdnfz Nsfx Aa Eok cap washer diameter: 100 mm cap washer rotation: ca. 4500 Upm engine: 380 V, 0,25 kW space needed: 600 x 450 x 1380 mm

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop Njdjrtd Uwepfx Aa Eelk - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Year of construction: 1999, condition: excellent (used), Type: K64DC8Q-VA Serial number: 99099-1 Year of construction: 1999 Bowl: 65 litres Knives: variable speeds Bowl: 2 speeds Steam: 1.5 Bar, 55 kg/h Nledpfx Aasq Dqgzo Eek Vacuumpump: Elmo 2BV2071, 125 m³/h Power: 3 x 400V, 50Hz, 50kW Dimensions: 1750 x 1950 x 2000 mm Weight: 1700 kg With unloader, water dosing, tempurate indicator

Condition: new, The Turnado 230/2000 is a versatile and robust Conventional Horizontal Lathe from KNUTH, designed for various machining needs within the Engine Lathes product group. This modern version of the classic lathe features a heavily ribbed machine bed and a powerful main motor, providing high torque and a wide range of spindle speeds. It includes essential accessories such as a 3-jaw lathe chuck, a 4-jaw independent chuck, and an integrated coolant system, making it efficient for operational tasks. The user-friendly control panel ensures easy operation, while the high-quality spindle support delivers precision even under heavy loads. With a maximum workpiece length of 2,000 mm and a turning diameter of 460 mm, this machine is built to offer lasting high value and high productivity. You can request a quote to enhance your machining capabilities with the Turnado 230/2000, your ideal choice in the Conventional Horizontal Lathes category. Nlsdpfxjp Ebgrj Aa Ejk

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, Nledpfxoiyynds Aa Eok send us your inquiry or visit us, you´re welcome

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, For sale is a lathe of the brand Weiler type Primus LZ-GS The machine is in very good condition Technical data Year of construction 1989 Machine no. 4443 Operating voltage 380 V Center height 120 mm Center width 430 mm Speed:60 - 3000 rpm in 18 gear stages Spindle clearance 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feed rates from 0.03 to 0.15 mm /rev Possible threads metric, inch, module and diametral pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Nodpjihig Iofx Aa Eolk PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), A Hako compact sweeper with 2 disc brushes and central suction is available. Axle loads 1/2: 1200kg/1500kg, turning circle: 1390mm, engine: Yanmar 3TNV88C, power: 25.5kW, displacement: 1642cm³, cylinders: 3, emission stage: V, fuel capacity: 41l, forward/reverse speed: 25km/h/12km/h, operating hours: 97.6h. Machine dimensions X/Y/Z: approx. 3150mm/2000mm/1100mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Nlodpswaa Hqefx Aa Ejk

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm Nodpjk Egrpsfx Aa Eslk - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set