Center Lathe

WMW Mikromat DZFG 200x500

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 315 mm turning diameter over support: 200 mm turning length: 500 mm Bwedpfxju Ix Hqe Agzoi turning diameter over bed: 315 mm swing diameter over face slide: 200 mm center height measured in bed: 180 mm spindle passage: Ø 32 mm range of revolution per miute: 56...2.800 / nur only 6 step links-rechts U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m -Workpiece pick-up via collet chuck -travels longitudinal slide= 580mm and cross slide=170mm -incl. tooling device lathe support -incl. change gears -steady rest Ø 100mm -fourfold tool holder The machines functionality is limited ! 6 speeds are currently selectable! (224/1800 ; 280/2240; 355/2800 rpm.) i.D. *

Condition: new, messurements (LxWxH): 1.630 x 700 x 1.200weight approx.: 480total power requirements: 1,1prebending: 2sheet thickness: 3sheet length: 1050 Bodpfxod Eqqqs Agzewi

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 91-160-2498, Used WEILER PRAKTIKANT 160 lead and feed screw lathe Centre height: 160 mm Centre distance: 650 mm Spindle speeds approx. 48–2,500 rpm Spindle bore: 40.5 mm Leadscrew and feed shaft are covered. Scope of delivery: Including 3-axis digital readout from Heidenhain, chip guard back wall, lever collet system (without collets), 1 x faceplate Ø 250 mm, electrically interlocked chuck guard, machine lamp, Multifix size A quick-change toolpost with 4 holders, bed stop, cooling unit, and fixed steady rest. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible. Bwsdpsyciw Asfx Agzji

Condition: used, Year of construction: 2013, operating hours: 8,500 h, power: 110 kW (149.56 HP), front tire size: 480/70R30, rear tire size: 580/70R42, Equipment: compressed air brake, front power take-off, 1551 AutoPow r 40 km/h,stepless & / 2058 ComfortView cab with cab suspension / / 2123 Comfort seat with / low-frequency air suspension, automatic / 2511 2 telescopic exterior mirrors, mechanical / extendable / 2567 with air conditioning and lifting roof Bwjdpfxju A Igcj Agzsi

Condition: excellent (used), Year of construction: 2013, operating hours: 87,327 h, functionality: fully functional, We offer you: Universal CNC machining center Manufacturer: DMG MORI Model: DMU 210P duoBlock µ-Precision Year of manufacture: 2013 Control system: Siemens 840D sl Technical specifications: Travel distances: X-axis: 1,800 mm Bodpeyhbcuefx Agzowi Y-axis: 2,100 mm Z-axis: 1,250 mm Swivel range: 360° Main spindle: Max. spindle speed: 18,000 rpm Drive power - main spindle (100/40% ED): 35 / 25 kW Rotary table: Table diameter: 1,700 mm Tool changer: Tool holder: HSK-63A Number of tool positions: 120 Operating hours: approx. 87,327 h Spindle hours: approx. 48,297 h Technical features & equipment: - Universal milling head with controlled B-axis - NC rotary table with cooled drive train - In-process tool measurement, type: BLUM Laser NT Hybrid - Coolant supply 40 bar through the spindle center - Coolant tank 2,500 l - Chip conveyor - Rotating inspection window - Electronic handwheel - 3D path control - Infrared measuring probe, Renishaw PP60 optical (OMP 60) - 3D quickSET - 4-color signal tower - Rinse gun with pump - Operating mode 4 - Machine adaptation for aluminum and glass machining, comprising: - Linear guides with additional Viton wipers - Ball screws partly with additional Viton/felt wipers - Sealing air for all linear measuring systems - Lubrication interval reduced to 10 to 15 minutes (overgreasing) - Adjustment of the maintenance plan for steel covers - Interface for camera monitoring and integration into the control system - Machine equipped for vacuum operation, including: - 2-channel rotary union, special centering bush and cable conduit in T-slots to the table edge - Additional compressed air connection at the table plate edge (opposite vacuum port) - Integration of vacuum monitoring with terminals for NC stop and error message "Vacuum error" - Oil-resistant rubber hose secured by 2 clamps at the rotary union - Evaluation of "minimum level" error in feed and spindle stop - Monitoring of coolant flow for internal and external supply - Machine prepared (cable routing) for use of spindle growth sensor (SGS) At the beginning of 2025, the ball screws and linear guides in X, Y, and Z axes were replaced. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if explicitly listed in the additional information. Technical data, information, and interim sale subject to change and errors!

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Bodpfovgmbvox Agzowi Rotating center point

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Bjdpfx Ajmdn Dxsgzowi

Condition: used, Year of construction: 1974, turning diameter over bed slide: 480 mm, center width: 1,500 mm, Center Lathe Manufactured by Heidenreich & Harbeck Bedpfewm D Ilex Agzowi Type Hanseat 480 Fully overhauled in 2012 Technical Specifications Manufactured by Heidenreich & Harbeck Type: Hanseat 480 Year of construction: 1974, fully overhauled in 2012 Control: Conventional Center distance: 1500 mm Turning diameter over bed: 480 mm Turning diameter over support: 295 mm Spindle speed: 20 – 2190 rpm Dimensions: L 3.50 x W 1.20 x H 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250, built-in - Faceplate D 400 - 10 quick-change tool holders - 1 steady rest All information is provided without guarantee. A live demonstration is possible at any time in our exhibition hall.

Condition: excellent (used), Ansemi parallel lathe, Mono FAP 325 ES type, distance between centres mm1500, centre height mm 325, bar passage mm65, motor power kw18, dimensions mm: 3300x1200x1700h weight kg3260 Bedpewcd Hmsfx Agzowi

Condition: refurbished (used), Pressure: 150t Bjdpfx Aegd H Tpjgzowi Length of Stroke: 140mm Table size: 510x530mm