Vertical machining center

MAZAK Variaxis 200

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine is equipped with a side mount tool changer with a capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. • Country of origin: USA • Certification: CE • Electrical: 440 V, 3 phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short circuit capacity: 10,000 A • Software version: 100.19.000.1123 • Power on time: 1,056 h • Tool changes: 32,413 • Included machine equipment: coolant system, wash gun, LED work light, fully enclosed working area • Condition: very good condition, low operating hours, well maintained Additional equipment • Machine vise • Touch probe Gbsdpfx Ansywv Tnjrel Technical Specification Taper Size SK 40

Year of construction: 2004, condition: ready for operation (used), X-axis: 750mm, y-axis: 600mm, z-axis: 520mm, C-axis: 360°, B-axis: 180°, max. spindle speed: 18,000/min, control: Siemens SINUMERIK 840D powerline, connected load: 55kVA, length: 4603mm, width: 5250mm, height: 2785mm, weight: approx. 9t, operating hours power on: approx. 65,000h, spindle hours: approx. 19,000h. No defects known, internally maintained, without maintenance reports, with documentation, rotary table, high-pressure internal cooling and Bluhm spindle probe. An inspection on site is possible. Godpfx Ansylbq Hsrobl

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 2,163 mm, total width: 2,005 mm, overall weight: 7,500 kg, product length (max.): 4,438 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over carriage: 630 mm • Recommended turning diameter: 315 mm • Max turning diameter: 376 mm • Max turning length: 1,350 mm • Bar capacity: 102–103 mm • Main spindle • Nose: ASA A2-11 • Bearing diameter: 160 mm • Through-spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s • Live tool speed: 5,000 rpm • Axes • C rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock • Type: Live tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill stroke: 100 mm • Motor / Power • Live tool motor: 7.5 / 1.5 kW Godpfsytt A Rjx Anrebl • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical capacity: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, 40–200 mm diameter range • Three motorized radial Eppinger live toolholders/spindles • Tool presetting system (tool presetter) Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2011, MACHINE SPECIFICATION MAZAK VARIAXIS 500-5X II Robot is not included. - X travel (spindle longitudinal travel): 510 mm - Y travel (table transverse travel): 510 mm - Z travel (spindle vertical travel): 460 mm - A-axis (table tilt): -120° to +30° - C-axis (table rotation): ±360° Spindle: - Spindle motor AC: 22.0 kW / 15 min rating - Rapid traverse X, Y, Z: 52 m/min - Tool magazine: 40 stations - Spindle taper: ISO 40 - Spindle motor AC: 22.0 kW / 15 min - Spindle bearing bore / outer diameter: Ø 80 / 110 mm - Speed range: 35 – 12,000 rpm - Max torque: 143 Nm @ 15% ED Axes details: X-axis (spindle longitudinal travel) - Travel: 510 mm - Rapid feed rate: 52 m/min - Working feed rate: 1 – 52,000 mm/min - Guides: Linear ball guides Y-axis (table transverse travel) - Travel: 510 mm - Rapid feed rate: 52 m/min - Working feed rate: 1 – 52,000 mm/min - Guides: Linear ball guides Z-axis (spindle vertical travel) - Travel: 460 mm - Spindle nose to table top distance: 190 – 650 mm - Spindle nose to table center distance: 140 – 600 mm - Rapid feed rate: 52 m/min - Working feed rate: 1 – 52,000 mm/min A-axis (table tilt) - Range: -120° to +30° - Minimum positioning increment: 0.0001° - Locking torque: 2,156 Nm - Positioning time for 90°: 1.9 s C-axis (table rotation) - Range: ±360° - Minimum positioning increment: 0.0001° - Locking torque: 2,156 Nm - Positioning time for 90°: 1.5 s Accuracy: - Positioning accuracy X, Y, Z: 0.012 mm - Positioning accuracy A, C: 21 / 14 arc sec - Repeatability X, Y, Z: 0.007 mm - Repeatability A, C: 12 / 8 arc sec Tool changer: - Type: Chain with double arm - Number of tool positions: 40 stations - Tool selection: shortest path search - Max tool diameter: Ø 80 mm - Max tool diameter when adjacent pocket is empty: Ø 125 mm - Max tool weight: 8 kg - Max tool length: 300 mm - Tool taper: CAT 40 - Pull stud: ANSI 40 type Mazak - Tool change time (chip-to-chip): approx. 4.5 s Table: - Table size: Ø 500 mm x 400 mm - Max uniformly distributed load: 300 kg - Table equipped with T-slots: 5 slots, 80 mm pitch - Center hole: Ø 50 H6 - Table height above floor: approx. 800 mm Coolant: - Through-spindle coolant: 15 bar - Tank capacity: approx. 250 L - Coolant filtration: filter - Flush nozzle: at spindle nose Miscellaneous: - Floor space (standard machine): approx. 2805 x 2950 mm - Machine height (standard): approx. 2838 mm - Weight: approx. 7,500 kg - Total fuse / power supply requirement: 50 kVA Included / options and features: - 40 tool stations - Tool identification system including pull stud with ID chip - Tool length measurement - Through-spindle coolant 15 bar + Through-Air - Spindle cooling - Machine lighting - Cooling through the ball screws on X, Y, and Z axes - HSM function for 2-D machining - Mazak “Tornado” for threading and milling - Synchronized feed/speed during threading - ISO/EIA programming - CE marking in accordance with European regulations VARIAXIS500II – Quantity: 1 unit MAZAK VARIAXIS 500-II 5X Vertical 5-axis multi-operation machine equipped with Mazatrol Matrix control system for simultaneous (ISO‑programmed) 4- and 5‑axis machining. Options / items listed: - MAZ85330 – 1 pcs – Through-spindle coolant, 15 bar - MAZ80551 – 1 pcs – Chip conveyor to side - MAZ71190X – 1 pcs – High-speed function type 1, only for ISO/EIA - High-speed function MAZACC-3D G05 P2 - Smooth transitions G61.1 - Contour compensation via parameter settings Gbjdpfxeygimlo Anrsl

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Mazak Variaxis 500-5X II was manufactured in 2007. Ideal for complex and precise machining tasks, this vertical machining center offers versatility and reliability. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis 500-5X II machine we have for sale. Contact us for more information. Additional equipment • Swarf Conveyor Gjdeyalk Hspfx Anrebl Machine Benefits Technical Machine Benefits • A-axis: -120° / +30° • C-axis: 360° Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 630 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: MATRIX, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 25,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, This 5-axis Mazak Variaxis 630-5X T was manufactured in 2009, offering advanced capabilities for complex machining tasks. Ideal for precision engineering, this vertical machining center ensures reliable performance. Consider the opportunity to buy this Mazak Variaxis 630-5X T vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits Gbjdpfxeyallke Anrsl • Number of tools (atc magazine): 80 • High pressure through the spindle: 20 bar Extra Information Machine still under power Technical Specification Taper Size ISO 40

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet Godjvry T Nspfx Anrsbl pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Condition: used, MAZAK QT 20 Gbjdpfx Anjwulzversl Model: OT-20-N-K Turret: 8 positions Motor: 18.5 kW Year: 1988 Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel

Condition: used, Various tool holders from Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken and others. Turning and milling tools with VDI 40 interface. Only for sale per pallet. Pallet 1: EUR 3,220 total Gbsdpfx Anjvpvmterjl 4x driven tool VDI 40 at EUR 580/each 10x tool holder VDI 40 at EUR 90/each Pallet 2: EUR 3,130 total 4x driven tool VDI 40 at EUR 580/each (1x new) 9x tool holder VDI 40 at EUR 90/each Pallet 3 is sold Pallet 4 is sold

Year of construction: 1973, condition: used, bore capacity in steel (diameter) 32 mm arm length 410 - 1000 mm workpiece height max. 765 mm coolant ja boring spindle diameter 38 mm diameter of quill 70 mm spindle stroke 225 mm Godpfx Anogmu A Sorsbl boring spindle MK 4 mm/min spindle turning speed - stepless 70 - 2000 U/min feed range - spindle 0,04 - 0,32 mm/U column diameter 225 mm bore radius max./min max. 1130 mm table surface area 630 x 1320 mm height adjustment 500 mm base plate 1500 x 1000 mm T-slots 4 Stück T-slot - distance 18 mm total power requirement 2,2 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m shift of supports: 590 mm without turntable and tools