Destacking device

MAHROS PONTE C/S

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Fgedpfjfi Tg Hex An Njf Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: good (used), the machine is in good condition, includes electrical cabinets, sharpening machine Fedpfx Anevdyr Ns Njgf

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Fodpfx Answ S Tyas Negf

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, Compact sawing machine with mechanical centering infeed, el.motors 2x75 kW and 2x90 kW, machine can be equipped with edging block and electric-operating cabinet with frequency converters TECHNICAL DETAILS Top diameter: 80-230 mm Maximum log diameter: 350 mm Minimum log length: 2.4 m Fsdpjxfrmwefx An Nogf Cant height in Chipper Canter: 60-232 mm Cant width in Chipper Canter: 70-210 mm Line speed: 70-150 m/min Chip length: 20-30 mm

Condition: new, Dimensions: W2500 / L5250 / H- 2100 Fgsdpfx Asu E Ezpjn Nof

Condition: ready for operation (used), Plant for log processing and sorting, with 2D measuring system KESAT, chain saw and loader LogLift F 165 Z. Infeed Chain conveyors, around the chain saw roller conveyors, sorting chain conveyor. Hydraulicylly driven pushing and lenght stops. Approximate dimensions 20 x 70m. Mesick 92S log measurement frame Control and evaluation PC, Win11 operating system Fgjdsw U Axwepfx An Njf Data output in .csv format Manufacturer and supplier KESAT, a.s. Installation date 03/2024 LOGLIFT F 165Z - all hydraulic cylinders are refurbished.

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Fgsdpsyy A Iqjfx An Nsf Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: good (used), The machine has been overhauled many new parts Fjdpfev Ihdzsx An Nsgf new cables new hydraulic station The machine has been checked, is functional, We can send a video.

Condition: new, number 100 Positionen 28 mm condition neu weight 280 kg Fodpfxou Aw Nge An Nsgf dimensions 1,2 x 0,5 x 1,3 m XXL starter package, consisting of: - 15x – standard clamping pliers - 5x – multi-clamp pliers - 10x – side tensioners with eccentrics - 15x – Loose cam H30 - 10x – Loose cam H100 - 2x – pipe insertion cam series - 10x – quick release bolts - 10x – stop block 15mm - 4x – Right Angle XL - 6x – Right angle - 6x – angle of attack - 1x – box - 1x – Insert holder - 1x – Allen key - Tool trolley

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Fgodpfjt Amc Isx An Nof