Moisture meter

Brookhuis FMI

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. Klsdpfx Agewn D Izs Uol 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Kjdpjg N Nl Dsfx Ag Ujll Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. 1 press loading basket with 10 positions. Kljdpfxsul Uizj Ag Usl 1 BVH 10-stage press with thermal oil heating platens. - Platen size: 3700 x 1900 - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². 1 press unloading basket with lateral evacuation pushers on lifting table. Line currently in operation, available second half of 2025.

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam Klsdpfsc Tmygox Ag Ujl pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: refurbished (used), Year of construction: 2014, load capacity: 180 kg, arm reach: 2,900 mm, We at Binici MB GmbH also have other industrial robots in-house. Ksdpewxxzwofx Ag Uell All our robots are fully functional (with complete accessories). We are at your disposal for good advice

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: Kodpfxjhw Ng Is Ag Uoll PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: excellent (used), Year of construction: 2007, High speed moulder infeed comprising a freestanding flat magazine for use in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 11kW hydraulic unit (max 150m/min). 15kW hydraulic unit (max 200m/min) possible to offer also. Suitable for 300mm wide feed material. A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Ksdpfoggghmjx Ag Uoll

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10 Klsdpfxjcggy Sj Ag Uol

Condition: ready for operation (used), total width: 3,000 mm, total height: 5,350 mm, total length: 15,000 mm, empty load weight: 20,000 kg, Rollenbaan type G met Titan straalwielen Kodewikatopfx Ag Uoll Voor profielen, platen, rollen, buizen... maximale ingangsbreedte: 1100 mm maximale instaphoogte: 550 mm 4 turbines, elk 11 kW werksnelheid: 1,4 2,4 m/min Totaal vermogen: 62 kW Wordt op de vloer geïnstalleerd, geen fundering nodig! Inclusief een grote keuze aan nieuwe reserveonderdelen ter waarde van meer dan 80.000€!

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Klodpfx Agofi Tg Hj Ujl Total installed motor power Kw 30