Remote-controlled tensioning trailer

MÖHRINGER ROBOCONTROL

Condition: good (used), Remotely controlled, hydraulically operated quick-release carriage with hydraulic auxiliary carriage. Fedpfsd Nqrqjx Apdsgf Gauge: 840 mm. Control panel and electrical switchgear cabinet.

Condition: refurbished (used), Year of construction: 2001, Balz Debarking Machine BG 90 6W-GR Year of manufacture: 2001 Completely overhauled in 2022 and not reassembled afterwards Minimum diameter: 14 cm Fgsdpoy Iabdefx Apdjf Maximum diameter: 90 cm With conveyor systems for infeed and outfeed Immediately available – Fully overhauled Location: Austria, near Linz

Year of construction: 1995, condition: ready for operation (used), Manual edger DK 90 consisting of: 2 x under-table crosscut saws, line laser, edger, roller conveyor with slat separator, and tilting table. Naturally equipped with all associated control cabinets and hydraulic power unit. Additionally included are numerous templates and a fixed slat head. Inspection is possible upon prior and mandatory appointment. The price is exclusive of 20% VAT, ex works, excluding dismantling, loading, contract preparation, and customs clearance costs. Fgedeq U R Etepfx Apdsf

Year of construction: 1993, condition: used, functionality: fully functional, Complete Möhringer MN 180/200 resaw line. Cutting height 180 mm. 4 adjustable saws. With infeed/outfeed. Used. Already dismantled. Good condition. Sale on behalf of customer. Fgodsxcidnspfx Apdof

Condition: used, Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, working width: 900 mm, number of blades: 5, power of feed motor: 22 W, ZE 905 in good condition. Sale by customer order! Max. pass-through 90 cm. Feed speed 32 m/min. Central lubrication. Regular service always performed. Runs very smoothly and can be inspected in operation. Machine is being replaced by a new one with Variopress system! Fgodpfxoy R Avvo Apdjf

Condition: used, Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 15,200 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2003 Machine number: 1658 Track width (m): 3.0 Crane type: OBX II Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.2 m Grab: included Crane position: in front of the cabin Cabin side: left Saw: 1.3 m Alpha Fgodpfoyglfdsx Apdsf !! Sale on behalf of customer !!

Year of construction: 1995, condition: excellent (used), Very well-maintained vertical panel saw for cutting sheet material. Equipped with a hydraulic unit and accumulator, and double hydraulic clamping. Attachment kit with measuring roller for the splitting wedge. Electrical control cabinet with control system. Fjdpfx Aeh Eyqvopdjgf Control panel with digital measurement input and operation. Photos show the original condition.

Year of construction: 1990, condition: excellent (used), 1 unit of a mass balancer for reciprocating machinery. Fgjdpfxjfm Ev Rs Apdef Includes complete accessories and mounting parts. Used very little.

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated side board processing line with singulation, trimmer for end trimming, 2 stacking machines, additional discharge, and end trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at a joystick: - Boards are conveyed laterally using a 4-strand overhead chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Nlewsy Uzhfj D A Tmcob - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick assesses: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box, with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats, with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - trimming length 505 mm for the underlying vibration channel - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - automatic lowering of the finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee processed, packaged, and strapped approximately 15,000 boards of side lumber 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping plant has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. A video of the process can be shown via WhatsApp! Fgsdjy Uzldopfx Apdsf

Condition: used, Year of construction: 1993, operating hours: 47,000 h, functionality: fully functional, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, We offer this used Baljer & Zembrod machine for log yards, year of manufacture 1993. Track width: 3m Crane type: OBX II Lifting capacity without grapple: 1900kg/15.2m Grapple: without Crane position: Rear of cab Cab side: Left Fgedjyz Twrspfx Apdjf Saw: 1.3m Alpha With HEB500 running rail Cutting bench with waste scraper chain If you have any questions or require further information, please feel free to send us a message or call us.