Welding robot

Lorch Lorch Cobot TIG+MIG/MAG Welding System

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 158 h, arm reach: 1,300 mm, Hello, Lsdpfxop E T N Aj An Uoab we are selling a demonstration robot UR10e, was used for a concept study but was discarded.

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Lajdpfoyyybhex An Uob Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2017, Technical details: grinding diameter: 280/320 mm grinding length: 750 mm centre height: 170 mm Lasdpfx Aettxg Ssn Ujb weight of the machine ca.: 22,5 t dimensions of the machine ca.: 4,7 x 3,65 x 3,0 m

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units Lodpfx Ajdfgg Isn Ueab D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Laedsifn N Nspfx An Usb Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: ready for operation (used), Year of construction: 2022, total width: 3,500 mm, product length (max.): 5,000 mm, number of axes: 6, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment • Robot controller and Teach Panel Ledpfx Asx D E Huon Ueab • Bumper (remote protection) and protective foil for TeachPanel • Multifunction flange for magnetic attachment to torch neck • Balancer system for hose attachment • weldControl URCap software • TOUCHSENSE CAP - component search using welding wire or gas nozzle • CAP component OFFSET - for moving and copying programs • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers (safety SPS for 2-station operation) Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: holdONE = torch holder incl. integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools shown in the pictures and the 3 cabinets are included. Extra Information Machine still under power

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: Lajdpfef Dwa Uex An Uob The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Ledpfjwykccsx An Usab

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, A welding robot system is for sale with the following contents: Elite Robot CS620 (1750mm range) with programming flange and software Fronius TPSi 500 Positioner rotateZERO 500 with 1800mm x 800mm intermediate frame Laedpfjv Dvllex An Ueb Machine frame System is ready for welding immediately

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer Fladder - Type Gyro 300 VAC Ex - Working width 1300 mm - Year of manufacture 1999 - Number of brush heads 6 pcs. - Rotating and oscillating grinding unit - 2 vacuum fans - Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection control cabinet - Feed continuously adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate control cabinet, Lasdevvl H Nepfx An Ueb Dimensions: W: 800 mm, depth: 400 mm, height: 1700 mm - Location, in the warehouse - Volt, HZ 400 / 50