Stationary shredder

LINDNER Jupiter 3200

Year of construction: 2010, condition: used, A shredder with control cabinet, three spare motors and discharge conveyor is available: 1) Lindner Jupiter 3200 shredder, dimensions: 6500x2500x3200mm, weight: 36t, operating hours: 58545h, with hopper, operator panel and hydraulic power unit. 2) Control cabinet for Jupiter 3200, dimensions: 3000x2000x600mm, weight: 980kg, with frequency converter, water cooling units and recooling unit. 3) Spare motor ABB M3BP 315LKA 6, power: 160kW, speed: 994rpm, IE3, dimensions: 1200x800x600mm, weight: 1.41t, is unused. 4) 2x spare motor Schorch 315L IMB3, power: 160kW, speed: 988rpm, dimensions: 1200x800x600mm, weight: 1.3t. 5) Inclined conveyor FC H101 1200/9200, dimensions: 9200x1500x1800mm, weight: 1.7t. The machine was regularly serviced by the manufacturer. During annual rotor maintenance, the rotor was fully hardfaced. The track was retensioned every three months. New motors with energy efficiency class IE3 were installed in 2021. The foreign object flap was replaced in 2024. Two couplings were replaced in 2024. The machine is operational. An on-site inspection is possible. The machine is not connected to the power supply. Bwedpfx As Aa Alkjp Iow

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min Bwodpswlp Hdefx Ap Ijw capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 39,000 kg, rotor length: 3,200 mm, power: 320 kW (435.08 HP), rotational speed (max.): 58 rpm, input voltage: 400 V, Completely Overhauled Machine: Delivery time: November 20, 2026 Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without large contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2 x 160 kW (ABB) Screen perforation: Screen holes 148 mm Control cabinet: complete with (frequency converter - ABB) Cooling system: included Working opening: 3190 x 1750 mm Filling volume: approx. 8 m3 Rotor length: 3190 mm Rotor diameter: 745 mm Rotor speed: 50Hz: 58 rpm Number of rotor knives: 36 pieces Knife dimensions, cutting knives: 145 x 145 mm Counter knives at the bottom: 9 pieces Stripper comb at the top: 9 pieces Bjdpfx Aowkilwop Ioww Feed system, hydraulic: 11 kW Total weight: approx. 39 t Dimensions L x W x H mm: 6250 x 3260 x 3090 mm Hopper: included Delivery time: November 20, 2026

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Bwodpfx Apsrp E Nno Isw

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Bedpfxoua Tbwe Ap Ieww Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: new, - Motor power 7.5 kW - Cutting force 20 tons Cutting channel designed for: - max. roll length 1100 mm - max. roll diameter 900 mm - Machine weight approx. 2500 kg - Tank capacity approx. 100 liters - Hand protection guard in the area of the control panel and opposite Bwjdpfx Apeftnt Nj Ijw - Color scheme: Housing RAL according to customer requirements Protective guard/knife bar RAL 1028 melon yellow Made to order Price and further information on request.

Condition: new, Year of construction: 2023, Coperion ZSK 27 MV Plus extrusion line. Application: Pet food and dental sticks. Bsdsxr Hgxspfx Ap Ieww Year: 2023, never used, still in its original packaging.

Condition: good (used), “Rentec Dinosaurus 2600S” for Sale Manufacturer: Rentec Type: Dinosaurus 2600 S Included Hydraulic-unit and control-unit build in container. With overhauled rotors. Also outlet conveyor in stock which fits to the Rentec Dinosaurs 2600S. Bwodpfevt Tptsx Ap Iew See PDF-file below for more detailed information.

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, input voltage: 400 V, type of input current: three-phase, New conveyor belt equipped with a metal detector. New 110 kW motor with frequency inverter new. Bodpfx Apjwqrrte Ioww Vacuum system with two zones. Erema double-piston screen changer. Die-face cutting system; water cooling; centrifuge; conveying fan. One barrel and two used spare screws

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Bwsdjwhy T Tepfx Ap Iew Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location