Main shaft for chipper canter

Linck GmbH Chipper canter V 25

Year of construction: 2020, condition: new, Designed for plug in complete system on a mobile stainless steel base plate incl. juice pump, with 63KW Wolf Oil boiler, 2 heatexchanger, heat-holding section for approx. 20-30 second and automatic control. Components: Gbodecx R Ddjpfx Afneh Heating circuit, heating pump and expansion tank, 2 heatexchanger for juice preheating / recooling and heation uo to 80°C. 24 m heat-holding section, automatic pneumatic temperature control. Capacity 3000 l juice per hour (depending on juice temperature).

Condition: good (used), Tranklein EK-D 100 double corner cutter Production Germany, Karl Tranklein. Very good condition. This is a professional, production device for rounding corners. Solid cast iron construction ensures precision operation. Two trimming heads. Interchangeable knives. Adjustable margins. One set of knives included. Stack height 100mm Weight 140kg Efficiency 50 cycles/min Power supply 400V Gbedpfx Afowxtguenoh

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. Gedpfx Aetyy Sfsfnebh As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: reconditioned (used), functionality: fully functional, The VK820 single-rotor machine is equipped with an 800 mm rotor and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Alternatively, according to a client's needs, the rotor can be changed to another one (480/620). Gsdpfowfdi Hox Afnobh

Condition: used, functionality: fully functional, tank capacity: 30,200 l, total height: 6,000 mm, inner diameter: 2,800 mm, overall weight: 1,400 kg, TECHNICAL SPECIFICATIONS - Flat bottom tank with 2% slope - Brand: ALFA LAVAL - Total capacity: 30,200 litres Gbjdpsv I A Nlsfx Afnoh - Material: 316 L stainless steel - Interior finish: Cold rolled - Exterior finish: Cold rolled - Temperature controlled ROOF - Conical - 1 off-centre chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor BOTTOM - 2% sloped tray with drain - 1 total drain valve with cap APPENDICES - Tanks compatible and suitable for storing liquid fertiliser - 6-month warranty - Compliant with CE standards

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Gbedotuyr Iopfx Afnoh Hydraulic milling head 22 kW motor Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Gsdpfjgwqk Sjx Afnobh Conveyors system between the machines included.

Condition: excellent (used), Complete planing line from intake to stacker with a Waco 3000 planer and surrounding equipment from System Hall Godpsm Uyknsfx Afnebh

Year of construction: 1999, condition: ready for operation (used), Linck EWD pre-cutting group consisting of: Gbjdpeufr Ndjfx Afnsh - Linck EV 40 infeed table, with 1x pair of turning rollers - EWD FZ 3 (mounted on PF19 frame with guide shafts DM 200mm) 2x drive motors with 75/45kW. 1 pair of pull-out rollers - Centering unit EVW - FR 14 side cutting saw with limit cutter 4 x 50KW + 2x 75kW - Side fabric separating transport - incl. hydraulic unit - without switch cabinets Machine is in very good condition! System can also be overhauled and offered with a new control system!

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h Gbsdpfx Afeuf Sy Asnsh - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar