Circular Vibrating Screen / Pre-Screen

Kleemann VU1S 1240ST

Condition: good (used), Year of construction: 1992, functionality: unexamined, overall weight: 18,000 kg, power: 250 kW (339.91 HP), For bulky waste, pallets, residual wood, etc. Hodpsq I Rkdjfx Abdjh Single-shaft shredder with electrohydraulic drive Rotor width: 2500 mm Rotor diameter: approx. 500 mm Electric motor: 250 kW

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m Hsdpfxou Ibu Ro Abdoh transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Year of construction: 2022, condition: new, ZIM T 1210 machine is designed to increase efficiency for production of manholes, conics and rings. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. This machine can produce pipes 300mm – 1200mm diameter and 1000mm height. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There is mortar bunker and mortar filling cart on machines. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. Hsdeirtdpepfx Abdeh The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Condition: reconditioned (used), Year of construction: 2007, - Primary impact crusher, Brand Laron Model IM 16 - Complete assembly, available as mobile or static unit. - New rotor bearings - New rotor blow bars - Front jaw (impact plate) in near-new condition - Production capacity: 800 t/h - Feed opening: 2320 x 1700 mm. Motor: 600 HP - New bearings and supports - New rotor blow bars - Apron feeder: width 2000 mm, length 10,000 mm. Gearbox and 40 HP motor. Feeder condition: semi-new - Disc pre-screen: width 2000 mm, diameter 1000 mm. Gearbox and electric motor - Hopper with 40 m³ capacity. Bolted and sectional for easy transportation - The entire assembly is mounted on a chassis with tractor head coupling and can be transported on dolly axles. We also have secondary hammer mills, screens, and conveyor belts available to complete a plant. Hsdpjimwg Hefx Abdsh

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg Hjdpetzf N Rsfx Abdeh

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Hedsrunu Iepfx Abdoh

Condition: like new (used), Year of construction: 1995, manufacturer: Kleemann year of construction: 1995 type: SHB 10/90 opening size: 1020 x 900 mm Hsdpfor A Dm Sox Abdoh impactor weight: ca. 14,9 to

Year of construction: 1983, condition: good (used), 1 Bracket milling machine make: RECKERMANN, type: KOMBI 900, year 1983 ser. no. 6367P, table size 1.000 x 310 mm, travel X/Y/Z 720 x 220 x 450 mm, tool holders SK 50, HD machine vice, Hodoh E Du Dspfx Abdoh spindle speeds: 3...2800 rpm

Condition: used, Year of construction: 1974, turning diameter over bed slide: 480 mm, center width: 1,500 mm, Center Lathe Manufactured by Heidenreich & Harbeck Type Hanseat 480 Fully overhauled in 2012 Technical Specifications Manufactured by Heidenreich & Harbeck Type: Hanseat 480 Year of construction: 1974, fully overhauled in 2012 Control: Conventional Center distance: 1500 mm Turning diameter over bed: 480 mm Turning diameter over support: 295 mm Spindle speed: 20 – 2190 rpm Dimensions: L 3.50 x W 1.20 x H 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250, built-in Hjdswm D Ilepfx Abdjh - Faceplate D 400 - 10 quick-change tool holders - 1 steady rest All information is provided without guarantee. A live demonstration is possible at any time in our exhibition hall.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, Equipment: rotational speed infinitely variable, Crusher Equipment Including: Special tools, reinforced, 7/7 tool carriers with 4 tools each (tools consist of main, pre-crushing, and post-crushing blades) Shaft speed individually and infinitely adjustable, approx. 0–41 rpm Including post-crushing bar Including tilting skip Drive Unit Drive power: 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swiveling cooler Electrics / Controls Including IFM display Including radio remote control Including four shredding programs (wood, waste, special, and green waste) Discharge Conveyor Including discharge conveyor Custom Equipment Including preliminary armoring of tools Including overband magnet, hydraulically height adjustable – neodymium – Hsdpfx Aou Hgllsbdjh Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional noise-reducing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS