Planer and moulder

Kälin PIKÄ 4 510

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Giodpfxjudxchs Admjl Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 2007, Technical characteristics : Gijdpfx Adjt R T Hcomsl - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Year of construction: 1994, FOUR-SIDED PLANER WEINIG Type: U 23 B.j 1994 Giedpsp R N Evefx Admol Max working height: 180 mm Max working width: 230 mm 6 spindle

Condition: excellent (used), Year of construction: 2003, Double end tenoner Celaschi 4+4 motors Gsdpovx Afnsfx Admjil Opening side up to 3000 mm

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: Gedpfxjw Dp Ufe Admjil - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: new, Year of construction: 2022, functionality: fully functional, Brand New Friulmac EQ 004 2.5 with feeding belt and a feeding hopper Touch-Screen Operation and automatic adjustment Working length - min 190mm - max 2500mm width - min 30mm - max 250mm thickness - min 12mm - max 35mm Speed - 6 - 25m/min 2 x 2 Giedpfx Adsvupm Demel Hoger - 3kW - 720 rpm Main Profiling Head - 4kW - 7200 rpm For more information I can send you the original documentation

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping Gisdpfx Adou D Amgemel - Connections for compressed air and electricity Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: new, Year of construction: 2026, functionality: fully functional, air demand: 1.13 m³/h, pressure: 7 bar, warranty duration: 24 months, total width: 1,370 mm, total height: 2,080 mm, total length: 1,150 mm, overall weight: 350 kg, Equipment: cabin, lighting, The Vapormatt PUMA is a high-quality and versatile manual wet blasting cabinet from Vapormatt, the leading company in the wet blasting sector and the inventor of this technology in the 1950s. Over more than 70 years of development, Vapormatt has engineered the PUMA to be both ergonomic and efficient. With an optional insertable basket, small batch parts can be processed, and a clamping device enables easy handling of rims or wheels. Large workpieces weighing up to 125 kg can also be placed on the robust stainless steel grid. For easier operation, an optional stainless steel rotary table is available. The integrated recirculating water system with cascade tank, filter unit, and return pump ensures efficient use of water and blasting media. Compared to sandblasting, wet blasting allows for gentler and more uniform processing, thanks to water as the carrier medium. This technique enables you to achieve smooth and consistent surfaces on your parts. Technical data: - Internal dimensions: 1100 x 1100 x 1200 mm (LxWxH) - External dimensions: 1400 x 1200 x 2100 mm (LxWxH) - Pump output: 2.2 kW (400 V / 50 Hz) - Sump volume: approx. 142 L water / approx. 15–40 kg abrasive media - Work surface load capacity: 125 kg Prices are net plus the current applicable statutory VAT and shipping costs. Godpfx Adetqmh Esmoil The images may show the machine including optional accessories, which are available at additional cost. If you are interested, we look forward to hearing from you. We are happy to provide professional and non-binding advice. The European Commission provides a platform for extrajudicial online dispute resolution (the OS platform). This offer serves exclusively as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, online messaging platform). In the first step, we will provide you with a non-binding offer, together with information about our general terms and conditions with legal notice and your right of withdrawal, before any purchase or conclusion of contract takes place.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The machine is currently in use. We offer live demonstration, dismantling loading, installation and training on your site Giodpsv Uab Ejfx Admel

Condition: used, Weinig Powermat 500 planer and moulder for four-sided planing and profiling of wood with CNC control and Powerlock quick-change system. spindle: 7 spindle 1: Bottom / 7.5 kW / 8,000 rpm spindle 2: Right / 7.5 kW / 8,000 rpm spindle 3: Left / 7.5 kW / 8,000 rpm spindle 4: Right / 7.5 kW / 8,000 rpm spindle 5: Top / 7.5 kW / 8,000 rpm spindle 6: Top / 7.5 kW / 8,000 rpm spindle 7: Bottom / 7.5 kW / 8,000 rpm working width: 230 mm working height: 120 mm Gijdpfx Ajxzdwyodmsl feed: 30 m/min / 4 kW Planer table length: 2.500 mm Air cushion table: Yes Control: PowerCom Plus