Kälin wood shavings production facility

KÄLIN Caster Grinder SL-800

Year of construction: 1999, condition: good (used), Nail lenght range - 50 - 90mm Speed - 100 nails/sec. ( frequency regulator ) Gedpfx Adodmbp Uemjil Management - PLC Simens S5

Condition: used, Pellet presses Manufacturer: Bühler Model: RPWPR 900.138 EX 4 presses - Bühler 3-4 tons per hour 4 mixers Gedpfxew Iy T Se Admoil 4 feed screw conveyors 20 m long stainless steel chain conveyor 16 m long output conveyor Soft starters

Condition: refurbished (used), Year of construction: 2005, operating hours: 6,149 h, overall weight: 19,000 kg, Doppstadt DW 2560 Buffalo - Year of construction 2005 Gsdpsw Ebapefx Admsil - Operating hours 6149 - Engine Mercedes Benz 354PS - Roller : 17 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Double-shaft trimming saw, manufacturer Link, type CSMK 285 A1 B1, with spraying unit Saw head clamping length: 4 x 125 mm Weight: 17,500 kg Extraction device Av 21 CSMA 540 Extraction SE - separation conveyor Giodpfx Aewww Iyedmel Drive power: 4 x 132 kW Feed rate up to 150 m/min

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Gjdpfx Aovwlqqsdmjil Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Deilman S, Second hand but fully renovated dipping tank for wood treatment. 6,5m long, 1,35m wide and 1,5m high with loading platform 6m. Automatic steering with 4 programs of dipping. Ready for work. Can dipp packets 1,2 x 1,2m - ideal for pallet boards Gedpfx Aoudwdwsdmeil

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Giedpfxjimv N Te Admjl

Condition: good (used), Year of construction: 2016, I sell the multirip saw of slovenian production MEBOR VR900. Giedexxgy Sopfx Admjl Cutting height under the blade 160mm / possibility of adjustment Width of cut on the feed wheel max. 900mm. 1 pc. moving head with laser adjustment. Diameter of main saw blade 300 - 500mm. Motor 55 KW. Total weight approx. 4000kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: good (used), Year of construction: 1991, Braun Canali band resaw TB 1100 Unimaster Roller diameter 1100mm With swivel table for diagonal cut Gijdpsucnt Hefx Admol disassembled from our warehouse in 23936 Grevesmühlen

Condition: excellent (used), Buderus Logano SK735-830Kw 6Bar,also available with1200,1400kw Gijdohtf Dkspfx Admol