Automatic Loading Panel Saws

HOMAG SAWTEQ B-400 PROFILINE

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 (TAPIO READY) Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Dsdpfx Aoz Erw Hodhocn Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34

Condition: used, machine/vehicle number: 007986, Max. panel width: 1000 mm Dcjdpfxjx A Tgge Adhjn Max. panel length: 2000 mm Length of conveyor: 3500 mm Introduction system: with pushers

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Dodpfxjy In Aps Adhecn Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) Dcedpfxoiidm No Adhon - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Dcsdpfx Ajx Rpgbedhen Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Dodpfxjvxvc Hj Adhscn Year 2007. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 0-250-84-4817, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,250 mm, controller manufacturer: HOMATIC, total height: 2,800 mm, table length: 4,300 mm, table width: 2,250 mm, controller model: PC86 PowerControl, spindle motor power: 12,000 W, Equipment: documentation/manual, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machine Year of manufacture: 2019 IMPORTANT: Available from mid October 2026 Maximum workpiece dimensions: • X-axis: 4300 mm • Y-axis: 2250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm EQUIPMENT / SPECIFICATION MATRIX-PRO working table, size 4300 x 2250 mm - 4 pneumatically retractable stoppers w. sensor monitoring - 3 vacuum pumps, capacity 290/345 m3/h each at 50/60 Hz, total 870/1035 m3/h - 2 vacuum fields with each 2150 x 2250 mm - Safety mats, safety fences with door - Main spindle motor 11 kW, 24.000 rpm - liquid-cooled - spindle with C-axis - tool clamping system HSK F63 Djdpfx Adeztl N Uohjcn - Tracing system SENSO-FLEX, controllable in z-direction - vertical drilling unit w. 21 spindles, drive motor 2.3 kW - 14-fold tool changer (disk type) 1 CONVEYOR ROLLER TABLE 7080 x 2200 mm Control / software: - PowerControl PC86 power touch - WoodWop Machine dimensions 11,60 x 4,50 x 2,80 m Available from week 28/2026

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Dcjdpjx Ebzdefx Adhjn Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: used, Year of construction: 2018, Vertical CNC boring and machining center Workpiece length 200 - 3,050 mm Workpiece width 70 - 850 mm Workpiece thickness 12 - 60 mm Milling spindle 1 unit Main spindle power 5 kW Max. speed 18,000-24,000 rpm (depending on configuration) Tool interface HSK-F63 or ETP25 Tool changer 4-position magazine Vertical boring spindles 13 Horizontal boring spindles X 4 Horizontal boring spindles Y 2 Nut saw X-direction Control system Homag powerTouch / Power Control PC 86 Software WOODWOP 7.x Total connected power 11.5 kW Compressed air requirement 7 bar Machine weight approx. 1,580 kg Installation dimensions (L W H) approx. 2,950 1,984 1,895 mm Djdpfxjzuw Dto Adhjcn CE marking

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) Dcsdpfx Asxmk Ebsdhsn - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...