Milling unit

HOMAG

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting Kdjdpfxox Tqgbj Ag Uog - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Kjdpob A Nm Usfx Ag Ujdg -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Kedpjwd Itmofx Ag Uodg

Condition: used, machine/vehicle number: 005939, Type of edging: Thin edge, Thick edge Kedpex Idxajfx Ag Usdg Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1500 mm Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 17300 rpm at 300 Hz Kdodpfx Ageb A Nnaj Uog -Voltage: 165 V -Hole diameter: 16 mm -Motors: some with right-hand or left-hand threads -Number: 9 motors available Price: per piece -Weight: 3 kg/piece

Condition: excellent (used), Year of construction: 2015, Specification: X/Y: 110m/min Z: 20m/min Working Field X: 3250mm Y: 1400mm (Passage 1600mm) Z: 125mm + 100mm for vacuum pods Kdjdpfx Agoyar Rts Uog 21 vertical drilling spindles 6 horizontal drills in the X direction 4 horizontal drills in the Y direction Grooving saw swivelling in the X & Y direction 10/12Kw main routing spindle Torque support for carrying aggregates (aggregates can not be swivelled) 8 Position tool changer travelling within the support in X & Y direction (not suitable for aggregates) 2 position linear pick up tool changer suitable for aggregates Optimised processing sequence drilling/routing Laser Pin for Vacuum pod positioning Automatic central lubrication Weeke quality pack Energy saving mode 400V 50hz CE

Condition: ready for operation (used), Year of construction: 2013, This HOMAG KAL210 Ambition 2262 edgebander was manufactured in 2013. It features a machine length of 7755 mm, supports edge thickness from 0.4 to 6 mm, and workpiece thickness from 8 to 60 mm. With a feed rate of 18–25 m/min, it is ideal for efficient edgebanding operations. Contact us for more information. Machine Benefits Technical Machine Benefits Kjdpfx Aoyaqbdsg Usdg • Machine length: 7755 mm • Workpiece thickness: 8–60 mm • Weight (kg): 4500 • Number of automatically resettable profiles: chamfer + 1 radius / feed rate: 18–25 m/min / edge thickness: 0. 4–6 mm • Testing is possible. / the machine is in good condition and was used on only one shift.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz Kdodpfx Ajb A Nmpsg Uog -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg

Condition: ready for operation (used), Year of construction: 2001, This HOMAG Optimat KL 78/A20/S2/Z was manufactured in 2001. A robust single-sided edge bander, it features a comprehensive setup including joint milling, a glue premelter, pressure zone, snipping, and flush trimming units. It also boasts advanced contour and groove trimming, profile and surface scrapers, and a buffing unit, all controlled by the Homatic NC 21 unit. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Single-sided edge banding machine with workpiece return • Joint milling • Gluing section with glue premelter • Pressure zone • Snipping unit • Flush trimming • Contour trimming unit fk 13 with automatic tool changer 8-fold Kdjdpsyap Tlofx Ag Uog • Groove trimming unit • Profile scraper // surface scraper • Buffing unit Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 6,175 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 300 mm, total height: 300 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis HOMAG WEEKE Profi BMG 611/60/15/F/AP was manufactured in 2012. A CNC Wood Machining Centre designed for precision and efficiency in woodworking applications. Consider the opportunity to buy this HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC Wood Machining Centre. Contact us for further details regarding this machine. Additional equipment • Safety devices: Laser, bumper • Torque support: Yes • Grooving saw: 90° pivoting • Vertical drilling spindles: 17 • Horizontal X drilling spindles: 2 • Horizontal Y drilling spindles: 2 • Liquid-cooled milling spindle: Yes • Closed drag chain: Yes • Handheld terminal: Yes • HOMAG SaveScan: Yes Machine Benefits Technical Machine Benefits • High spindle speed • Comprehensive safety features • Independent z-axes: 2 • 4th axis: yes • 5th axis: 5-axis spindle • Workpiece support aids available • Machine table: console table • Number of consoles: 12 • Features: automatic table positioning, homag ap table, two stop rows Extra Information Conformity marking: CE mark Kdedsyap S Iopfx Ag Uog Dimensions Machine Depth 6175 mm

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Kdedob A Nx Nopfx Ag Usg -1x motor: 1.5 kW 17300 rpm at 300 Hz -Shaft mounting: Collet Ø 12 mm -Dimensions: 340 x 110 x H150 mm -Weight: 10 kg

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 380 mm, number of axes: 5, This 5-axis HOMAG PROFI BOF 722/58/18/F/K was manufactured in 2005, featuring a machining range of X = 6000 mm, Y = 1800 mm, and Z = 380 mm. It includes a 5-axis fork head replaced in 2019 and two traveling plate changers with 18 slots each. Ideal for advanced woodworking, consider the opportunity to buy this HOMAG PROFI BOF 722/58/18/F/K CNC processing center. Contact us for more information about this machine. Kdsdsx D Hxfepfx Ag Uog • 5-axis fork head (replaced in 2019) • Rear spindle with Flex5 unit • 2 traveling plate changers, 18 slots each • Second vacuum pump, switchable individually Additional equipment • Computer with Windows 10 (new ~1.5 years ago) • WoodWOP 8.1 software

Condition: good (used), Tax cards Kdjdpeb A Nf Tofx Ag Ueg -Replacement cards for: -Homag Type: KFL 53 -Homag Type: KFL 54 -Homag entrance cards -Homag control cards -Homag controller cards -Cabinet: only sold as a complete unit -Weight: 200 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Kodpfxob A Nntj Ag Usdg -Power: 1.85 kW at 17570 rpm at 300 Hz -Voltage: 165 V -Receptacle: Shaft collet -Number: 8 motors available -Price: per piece -Dimensions: 350/75/H160 mm -Weight: 12 kg

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Kodpfx Agox A Hczo Uedg Total number of drilling spindles: 30 Total number of tool changer positions: 72