Used Homag Kal370 Ambition 2474 for sale (593)

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2474, year 2015: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank + AirTec System Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 4-motor pneumatic adjustable Dkodpexnb Uvsfx Acqer Radius R2 + multiradius scrapers servomotorical adjustable Glue scrapers servomotorical adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Entry magazine for two bands in rolls automatic Working thickness adjustment servomotorical driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 25m/min. Total length including feeding plate 8365mm Kilometerstatus 1.166.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) Dsdpfx Aoztl Scecqekr - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, machine/vehicle number: 006375, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Dsdpfjp Apx Tex Acqokr Operating Units: 9 nr

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue pots, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm including the piping shown, leading to 200mm Easy-Touch control with color display for easy machine operation 10 programs can be stored Dkodpfx Aszn Afpocqer Units: Top pressure with manual adjustment via crank and SIKO counter Infeed guide with manual adjustment and SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue pots for quick color changes from white to transparent Gluing unit with automatic edge infeed for roll material up to 3 mm Pressure zone with 3 rollers Cut-off saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual in folder form All indexable inserts of the milling units and trimming blades have been replaced or resharpened, saws sharpened, diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses replaced. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: ready for operation (used), Year of construction: 2010, Edgebander manufactured in 2010. This HOMAG KAL 210 Ambition 2264 is a used single-sided edge banding machine. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL 210 Ambition 2264 machine we have for sale. Contact us for further details. Equipment: - Release Agent Spray Unit - Jointing Unit - A20 Glue Application Unit - Pressure Roller Unit - End Trimming Unit - Profile Trimming Unit - Corner Rounding Unit Djdpfxsy Dgm So Acqjkr - Profile Scraping Unit - Glue Joint Scraper - Buffing Unit - Cleaning Spray Unit • Used single-sided edge banding machine

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Dsdszdzmkspfx Acqjkr Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: used, machine/vehicle number: 008148, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 210 AMBITION 2274 Dodoxtugcepfx Acqskr Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 210 AMBITION 2274

Condition: used, machine/vehicle number: 008146, Type of edging: Thin edge, Thick edge Dodsw Tiv Tepfx Acqjkr Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Operating Units: 7 nr

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Dkedex Swf Ujpfx Acqer Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Djdpfewd Itmjx Acqjkr Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 005385, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Dedeg Iy Duepfx Acqskr

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 0-261-04-6713, functionality: fully functional, operating hours: 6,836 h, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 18 m/min, actuation type: electric, total height: 2,300 mm, total length: 5,760 mm, total width: 1,555 mm, overall weight: 2,600 kg, Equipment: CE marking, documentation/manual, HOMAG Optimat KDF 650 C (Ambition 1650 FC) – AIRTEC, Corner Rounding, powerTouch – Single-Sided Edging Machine Key Information: • Manufacturer: HOMAG • Model: Optimat KDF 650 C (Ambition 1650 FC) • Year of Manufacture: 2017 • Condition: Used, ready for operation • Location: Skwierzyna, Poland _____ MACHINE DESCRIPTION Professional single-sided edging machine designed for processing straight edges of workpieces, applying various types of edge banding (roll and wood veneer), and performing complete final processing. The machine features a comprehensive range of equipment, including an AirTec AT 15 unit (seamless edge banding technology), a corner rounding unit 2x WD 60, and a modern powerTouch control system with a touchscreen. Complete automation and pneumatic adjustment of units from the control panel. TECHNICAL DATA • Feed speed: adjustable 8 – 18 m/min • Max. speed with rounding cutter: 11 m/min • Working height: 950 mm • Workpiece thickness: 8 – 60 mm • Edge banding thickness (roll): 0.4 – 3.0 mm • Edge banding thickness (veneer/strip): 0.4 – 12.0 mm • Total machine length: 5,760 mm UNIT CONFIGURATION 1. Pre-milling unit: 2 x 2.2 kW, with diamond heads. Dksdpfx Acey Ec A Ssqsr 2. A12 edging unit: quick-change hot melt adhesive application unit, infrared emitter for heating the edge of the board. 3. AirTec AT 15 unit: Enables processing of laser/functional edge banding using hot air. Ideal joint, no visible glue. 4. Edge banding magazine: automatic for rolls and strips. 5. Pressing zone: 1 main roller pneumatically driven + 3 pressure rollers. 6. Trimming unit: 2 motors x 0.35 kW, flush/chamfer. 7. Longitudinal milling unit: 2 x 0.55 kW, counter-rotating, DFC cutters with pneumatic adjustment, adjustable from the screen. 8. Corner rounding unit (WD 60): 2 x 0.35 kW. Multifunctional unit for complete processing of the end of the workpiece (3D corners). Adjustable from the screen. 9. MZ40 profile scraper: Pneumatically retractable (R1 / R2), adjustable from the screen. 10. Flat scraper (glue joint): For removing excess glue (ready-to-use finish). 11. Polishing unit: 2 motors x 0.18 kW. CONTROL SYSTEM • powerTouch: modern control panel with a 21.5" Full-HD touchscreen. • Intuitive graphical interface, data logger for production data (number of pieces, time, edge banding consumption). • Network operation possible (Ethernet). _____ Additional information for the buyer: • The machine comes from a Polish distribution network (HOMAG Poland). • Complete technical documentation included.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, edge thickness (max.): 20 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm Dkodpfoxzfwbox Acqjr - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, edge thickness (max.): 20 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! Dkjdpoxg Ix Sefx Acqsr TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Dsdpfxszku Rpo Acqokr Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 0-205-11-7632, functionality: fully functional, working width: 1,600 mm, milling spindle speed (max.): 30,000 rpm, working height: 535 mm, working length: 5,800 mm, TECHNICAL DETAILS Working area X-axis: 5,800 mm Working area Y-axis: 1,600 mm Working area Z-axis: 535 mm Number of milling spindles: 2 pcs. Milling spindle 1 Controlled axes: 4 pcs. Max. spindle speed: 30,000 rpm C-axis: Yes Dkjdpfx Acezrmnpeqor Milling spindle 2 Controlled axes: 4 pcs. Max. spindle speed: 30,000 rpm C-axis: Yes Table type: Beam table Table length: 2,500 mm Table width: 1,500 mm Tool clamping system: HSK-F63 Tool changer slots: 36 pcs. Material clamping system: Pneumatic MACHINE DETAILS Software: WoodWOP Dimensions & Weight Installation dimensions (L x W x H): 12,200 x 9,000 x 3,500 mm Overall length: 26,000 mm Empty weight: 9,000 kg Transport packages: 8 pcs. Vacuum system Number of vacuum pumps: 2 pcs. Vacuum pumps: Elmo Rietschle 2BL2141 Connection diameter: 50 mm Voltage: 400 V Current consumption: 91 A EQUIPMENT Infeed and outfeed system Loading system Unloading system Labeling machine Hand control Chip conveyor Vacuum pumps Tools USB stick with CNC documentation CE marking Documentation Safety fence Door interlock switch Safety light curtain

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Dksdszdki Ujpfx Acqsr Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Energy Saving Mode

Condition: excellent (used), Year of construction: 2023, Specification: Workpiece Length X: 3100mm Workpiece Width Y: 1250mm (1405mm to back stop) Workpiece Thickness: 260mm including pod 12Kw 5 axis spindle 12 Vertical Drilling Spindles 4 Horizontal Drilling Spindles in the X Direction 2 Horizontal Drilling Spindles in the Y Direction Grooving Saw, can be swivelled 0-90 LED Pod and Rail positioning Aid 10 Position Fixed Lateral Tool Changer 14 Position Rotating Tool Changer Comfort Package Dkjdpfx Aezgtxqecqer Tool Length Check 2 Vacuum Pumps Supply unit for Pneumatic Clamping Elements Energy Saving Function Powercontrol with powerTouch WoodWop for machine 3D Simulator for Machine 3 Phase 400V 50Hz CE

Condition: used, machine/vehicle number: 007694, Position 1: Panel Feeding and Loading HOMAG-PROFI KAL330/7/A3/WZ Dkodpfx Aowuuf Rscqsr Position 2: bordatriceLottoUno HOMAG-PROFI KAL330/7/A3/WZ Position 3: Panel Return Systems HOMAG-PROFI KAL330/7/A3/WZ

Condition: ready for operation (used), Year of construction: 2016, This 4-axis HOMAG OPTIMAT BHX 200 was manufactured in 2016. It features a rigid steel frame construction and dust-protected linear guideways, ensuring durability and precision. The machine is equipped with digital servo drives and offers rapid traverse speeds of up to 50 m/min on the X/Y axes. If you are looking to get high-quality CNC processing capabilities, consider the HOMAG OPTIMAT BHX 200 machine we have for sale. Contact us for further details. • Measurements width: 50-1,250 mm • Rapid Traverse: X/Y axes: up to 50 m/min; Z-axis: up to 15 m/min • Main electronic connection: 400 V / 50 Hz • Used Vertical CNC Machining Center • Year of manufacture: 2016 • Rigid steel frame construction • Dust-protected linear guideways • Digital servo drives on X, Y, and Z axes • X-axis driven by rack and pinion • Y- and Z-axes driven by ball screws • Maintenance-free servo motors with high-resolution encoders • Integrated dust extraction system for machining units Djdpfjzr Ndgex Acqokr • Additional dust extraction connections • Manual loading and unloading of workpieces • Pneumatic positioning stop • Workpiece length: 200-3,050 mm (with roller conveyor) • Workpiece thickness: 8-80 mm • Air-conditioned electrical cabinet for operation above 35°C • ECO Plus energy-saving mode with automatic standby, drive shutdown, and control system shutdown • The technical data and descriptions are copies of the order confirmation at the time • The information is for informational purposes only and is not binding

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This HOMAG Optimat KAL210/6/A20/S2 is designed for jointing straight workpiece edges, gluing, and finishing various edging materials up to 20 mm thickness. It features a feed rate of 18 - 25 m/min and accommodates workpiece thickness from 8 to 60 mm. If you are looking to get high-quality edge banding capabilities, consider the HOMAG Optimat KAL210/6/A20/S2 machine we have for sale. Contact us for further details. • Spindle motor power: Joint milling unit: 2 motors each 3 kW; End trimming unit: 2 motors each 0.8 kW; Pre-milling unit: 2 motors each 1.5 kW • Spindle speed range: Joint milling unit: 9,000 1/min; End trimming unit: 12,000 1/min; Pre-milling unit: 12,000 1/min • Single-sided machine for jointing straight workpiece edges, glueing and finishing of various edging materials from the roll or as strips, up to 20 mm edge thickness, in longitudinal and transverse pass. • Feed rate: 18 - 25 m/min. • Feed rate with form milling FK11 max. 20 m/min. • Workpiece thickness: 8 - 60 mm • Edge material strip max.: 0.4 - 20 mm • Edge material roll: 0.3 - 3 mm • Joint milling unit with electro-pneumatic control of both motors • Gluing unit A20 - 2 rollers • Quickmelt gluing unit • Temperature control electronic with LED display • Magazine 2 rolls manual • For solid edges, strips and rolls • 1 edge feed • 2 roll holders • Pressure zone C • 1 driven pre-press roll diameter 150 mm • 6 pressing rollers diameter 70 mm • Motors can be swivelled manually for bevel cutting • Shape trimming unit FK11 manual • For machining the edge protrusions on the upper and lower edge of the workpiece and for milling of the workpiece front and rear edge • Finishing unit profile PN10 • For chamfering or rounding pre-milled PVC edges • Finishing unit consisting of finishing unit glue joint and buffing unit • Automation package chamfer / radius KAL210/6/A20 • Automatic adjustment of infeed ruler Dsdpfozrg Icjx Acqekr • Automatic adjustment of pressure zone • Pneumatic adjustment from chamfer to straight cut • Pneumatic adjustment of the trimming motors for flush or projection trimming • Pneumatic adjustment of pre-milling unit for flush or projection milling • Automatic adjustment from chamfer to radius milling for form milling • Pneumatic adjustment PN10 / FA11 • Electronic height adjustment • Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

Condition: used, machine/vehicle number: 008696, X axis working area: 7400 mm Y axis working area: 2250 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Dodpfxezrux Ne Acqjkr Total number of tool changer positions: 30

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, Colour: Grey - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes Dedpfxex Ei Syo Acqskr - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), functionality: fully functional, Flat- or glue joint scraping unit Used unit, not reconditioned, without warranty - For removing of glue residuals or leavings from the panel surface in the area of the glue joint. Dodpfxetywuko Acqekr Specification: - consisting of one top and one bottom unit, individually adjustable. - top unit synchronized with top pressure in vertical direction - version with 3 small tracer rollers, individually adjustable, for smooth passage at front and rear edge of panel. IMPORTANT ANNOTATION: version with pneumatic cylinders for lateral cut-in/out controlled by selection of the individual unit in the main control is currently not available. But it is possible to retrofit this feature. Please ask for our quote. Installation and set-up of the unit at your machine is also possible.

Condition: reconditioned (used), functionality: fully functional, Universal Trimming Unit UF11, with frequency inverter Used & reconditioned unit, without warranty For grooving or rebating in edgebanding machines or double end tenoners Specification: - motor can be swiveled steplessly or in rasters from +90 to -90 degrees (each vertical position of motor shaft) - motor 4 kW, 3Ph 400 V, 300 Hz Dksdjztl Rxepfx Acqjr - motor shaft diameter 30 mm - with electro-pneumatic jumping function - inclusive of suitable KEB frequency inverter (used & tested) Upon request the unit can be upgraded to motorised (NC-controlled) adjustments in x- or y-axis. Please ask for our quote. Installation and set-up of the unit at your machine is also possible. Availability 1 - 2 weeks after receipt of order.