AUTOMATIC BORING (DRILLING) MACHINE

BIESSE Techno FDT

Condition: used, machine/vehicle number: 007805, Max. panel width: 3200 mm Max. panel length: 1200 mm No of Bottom Units: 6 Hfsdpfx Aox A E Susfnoc No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Hjdpfxsw T Sd Te Afnjfc Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 Hfedpfjlwqrtox Afnoc The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: Hfsdpfx Afjdfgg Ijnec A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: ready for operation (used), Year of construction: 2011, Features:* Used telescopic belt conveyor* Condition: fully functional with traces of use* Ideal for fast material transport* Expertly dismantled and packed* Colour: Blue* 2 pcs. in stock* Price per pieceTechnical data:Manufacturer: BuddeBaujahr: 09/11Model: TGF03Total length: 14.530 mmConveyor length: 14.000mmLength retracted: 5.000mmLength extended: 14.000mmOverall width: 1.240mm (incl. switch cabinet)Width: 990mmBelt width: 600mmCondition: good (used)Belt type: GlattBauhöhe: 750mmIndividual weight: 2.200mmIncl. rear counterweights. Telescopic belt conveyorThe telescopic belt conveyor is ideally suited in the order picking zone to interlock machines or workstations and to optimise the internal process. During transport, the telescopic belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the loading or unloading point and also serves, for example, as a connecting section in front of or between production and processing machines. In addition, it enables efficient part transport in operations and warehouses and serves to convey considerable quantities and distances. Customized solutions for your intralogisticsFor roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be pleased to prepare an individual offer for you or advise you on the Hedpfxed S Hkis Afnjfc

Condition: excellent (used), Automatic through-feed ELECTRONIC Drilling LINE (CNC controlled): Also for NARROW PIECES (min. mm 100). W05024F) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - N° 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.5 each), - N° 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) Hjdpfou Tp Sljx Afnefc - N° 4 top vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) - N° 6 top pressing devices + N° 2 endless screws to evacuate the wastes. With CNC - PC DESK TOP (Modul Editor) - software Tooling System W05024G) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.5 each), - No. 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) - No. 3 top vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + N° 2 endless screws to evacuate the wastes. 2nd Drilling Machine connected to the NC of the 1st Machine

Condition: excellent (used), Automatic through-feed ELECTRONIC Drilling LINE (CNC controlled): W05022F) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - N° 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - N° 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) - N° 3 top vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) - N° 5 top pressing devices + N° 2 endless screws to evacuate the wastes. With CNC NC 500 (Software Tooling System + Woodmaster) W05022G) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) - No. 3 top vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) Hfodst Ig A Sepfx Afnec - No. 5 top pressing devices + N° 2 endless screws to evacuate the wastes. 2nd Drilling Machine connected to the NC of the 1st Machine

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 Hodpfxecggy So Afnjfc - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Hedpfjidqd Tox Afnjfc No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Hfodpfx Afeidqf Ronsc Vertical top pressure clamps (N°) 5 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. Hfjdpfxjw E Itis Afnsc The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours: 55,806 h (pump) Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), AUTOMATIC Drilling and Dowels inserting LINE (2 machines): W12054A) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 5 bottom vertical units (each with 2 swivelling drilling heads at various spindles, HP 2.3 ea) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 5 top pressing devices - No. 2 endless screws to evacuate the wastes. With NC (software Modul Tooling System) to control, manage and run the 2 machines of this line W12054B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 8 inserting nozzles, such as Glue injectors and dowel drivers) - No. 3 bottom units (each with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 3 Top pressing devices Hsdpfx Afsvnq Txjnsfc - No. 2 endless screws to evacuate the wastes.

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring Hfedpfx Ajd Nviqefnjc belts out-feed from 2nd multi borer (and dowels inserter)

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: Hsdpfx Afou Afu Ronjfc 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling Hfjdpfxecr U Urj Afnjc “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.