Single-side Edge bander

HOMAG KAL 310 /7/A3/S2

Condition: new, empty load weight: 900 kg, maximum load weight: 1,600 kg, overall weight: 2,500 kg, loading space length: 4,200 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Sturdy and high-quality sales trailer as a high loader for snacks or goods. Our* snack bar trailers* from the *SELLERH* range are manufactured with an insulated sandwich body. The sturdy steel frame is welded and hot-dip galvanized for high stability. A lockable personal lock in steel and *not in plastic* is installed in the door. The box body is made of 25 mm polyester sandwich in white. The *car trailer* has four crank supports for jacking up the *snack van*. In other words, an inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: *entry door with personal lock lockable*, *step on drawbar*, *sales hatch on the right* with lifting aids lockable from the inside, electrical distribution, stable *crank supports*, *sandwich body* 25mm outside in white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*. Bjdpopfb Nyofx Ac Tsll

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Blsdpoh E Sghofx Ac Tel Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Bsdpfx Acstk It Sj Tsll Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: new, Year of construction: 2023, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. Bsdpfx Aeku Aiboc Tsll This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Always in stock, available as left-hand and right-hand models with motorized cleaning. Riedex DM-200 Motor power 4.0 kW Ready for connection. Packaged on a pallet! Ready for shipment. Alternatively, also available with JET cleaning. Many different versions are possible ... - with cell wheel lock (if desired, with a subframe) - with briquetting press etc.

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Bedpex A Tk Esfx Ac Tjll Max. panel length: 4300 mm Main saw blade projection: 75 mm No of Grippers: 9

Condition: used, machine/vehicle number: 006042, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 40 mm Bsdpfxewacqlj Ac Tell Operating Units: 9 nr

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Bjdpfx Acei Hn Sro Tell Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. Bjdpeiq U Tqofx Ac Tell The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 950 mm, total width: 970 mm, total height: 2,150 mm, number of chambers: 4, Equipment: CE marking, documentation/manual, Multi-deck oven Wachtel Mini Piccolo 4 TOP electric multi-deck oven with steam injection for 4 trays 600x400mm DMS 2 control system with night start function Exhaust hood with fan Shelf below for 4 trays 600x400 Connection 400V, 2 x 16A CEE plug Dimensions: 970 x 950 x 2150 mm, WxDxH Used oven Quality from a specialist company! Benefit from over 35 years of experience! Options: Water filter Pressure reducer Maintenance contract Training and commissioning We have many more ovens in stock! Bedpfeyy R Ufjx Ac Toll

Condition: excellent (used), SCM T130E Spindle Moulder with Glazing Bead Unit Spindle diameter: 35 mm Total spindle length: 140 mm Variable spindle speed via frequency inverter: up to 10,000 rpm Main motor power: 5.5 kW Unit for cutting glazing bead Unit power: 2.2 kW Electronic spindle height adjustment Electronic fence adjustment 4-roller feed Masterwood Bodpfx Aexbnyrsc Tell Feed speed adjustment via variator CE certified DTR technical documentation Year of manufacture: 2005