CNC Machine Centres For Routing, Drilling And Edgebanding.

HOMAG CENTATEQ E-310

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 4,200 mm, feed length Y-axis: 1,600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Prepared for one main spindle with gluing unit, mounted to the right of the gantry crossbeam. 5-axis main spindle, 12 kW Drilling head with 31 spindles: 21 vertical and 10 horizontal Duedpfx Acox Irzcexop Grooving saw blade, tiltable 90° Blowing nozzle for 60 mm edge Circular tool magazine for 32 tools, HSKF63 Linear tool magazine with 8 positions Circular magazine with 10 positions Power Edge Pro Duo gluing unit Safety control with bumper Chip conveyor Vacuum pump PowerTouch, WoodWop control software

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Biesse Rover A 1542 CNC Machining Center Working area X: 4140 mm Working area Y: 1560 mm Working area Z: 245 mm 5-axis electrospindle, HSK-F63 interface Vertical drilling heads: 17 Horizontal drilling heads in X: 6 Horizontal drilling heads in Y: 4 Grooving saw blade Dedoyh Nd Repfx Acxjup 25-position tool changer Worktable with 8 beams

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: J10039) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw Dusdpfjl Hycwex Acxsp

Condition: new, :VL 1100A x-travel:1100 mm y-travel:600 mm z-travel:600 mm table-size:1280x600 mm max. table load:1000 kg distance spindle center to column:630 mm distance spindle center to table:100-700 mm rapid traverse in x-y-z axis:36/36/30 m milling feed range:1-10.000 mm/min :10.000 1/min (direkt) spindle drive:11/20,4 kW positioning accuracy:+/- 0,010 mm repeating accuracy:+/- 0,008 mm tool taper:40 BT max. tool diameter:80/130 mm max. tool weight:8 kg max. tool length:300 mm dimensions:4.920x3.510x2.850 mm weight of the machine ca.:7,25 t Brand-new CNC vertical machining center with CNC control Siemens 828D with Shopmill. Incl. the following standard accessories: CNC control Siemens 828D with SHOPMILL including 2-year warranty 1 piece coolant system 1 piece automatic 20-fold tool changer (Model VL-700), Type ?ARM TYPE ATC? 1 piece automatic 24-fold tool changer (Model VL-900, VL-1100, VB-1000, VB-1200, VB-1600), Type ?ARM TYPE ATC? 1 piece Halogen Machine Lamp 1 piece alarm / indicator lamp rigid tapping 1 set of tools 1 piece chip conveyor (chain) 1 piece tool set (water gun, air gun) 1 set foundation blocks and fixture screws heat exchanger for electric cabinet automatic lubrication system full enclosure guard automatic power off Spindle speed of 8000 U / min (Model VL-700, VL-900, VL-1100, VB-1000) Spindle speed of 6000 U / min (Model VB-1200, VB-1600) linear guide (VL-Serie) from THK or Rexroth 1 set of operating manual with spare parts list in German language 400V, 50cps, 3 phs CE version incl. CE Declaration of Conformity belt drive with 10.000 U/min door interlock 8,4? Screen spindle chiller coolant through spindle center tool setter (Blum) Warranty: 12 months Djdpsi E Alzsfx Acxjup More information can be found in the Appendix.

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: Duodpfx Aeyigu Nscxop - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements...

Condition: excellent (used), Numerical Control Type NC 400 (with work cycle management software) Through-feed motorized conveyoring belts (No.) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Dodpfji D D Tfox Acxeup Splindles for each horizontal drilling head (N°) 11 No. 4 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 25 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops OPTION: Front feed hopper/loader (for narrow pieces: Min 60mm - Max 260mm)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Vertical machining center X-axis working area: 3200 mm Y-axis working area: 1250 mm Djdpfoydpg Tex Acxjup Z-axis working area: 60 mm Electrospindle and tooling groups: 6.5 kW electrospindle with HSK-F interface and C coupling axis HSK F63 saw blade unit, max diameter 140 mm HSK F63 group, manually adjustable/tiltable for milling or sawing 8-position tool magazine Lower drilling unit BH21: Processing unit consists of: - 13 independent vertical spindles - 4 independent horizontal spindles, positioned along the X and Y axes, including: - 3 spindles in the X direction (2 units with double output) - 1 spindle in the Y direction (1 unit with double output) Upper drilling unit BH23: Processing unit consists of: - 14 independent vertical spindles - 4 independent horizontal spindles, positioned along the X and Y axes, including: - 3 spindles in the X direction (2 units with double output) - 1 spindle in the Y direction (1 unit with double output) - 1 grooving saw unit, diameter 120 mm, fixed working direction along X bSolid software Perimeter safety fences and safety mat Panel referencing system Machine structure Panel handling unit Worktable Safety devices Electrical and electronic cabinet Transformer and electronic power supply Electrical cabinet air conditioning system Manual QR code laser reader Provision for panel unloading unit Side transfer unit, L = 2200 mm, for returning panel to operator Panel discharge belt Machine weight: 2500 kg Machines in excellent condition

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,500 h, This 5-axis SCM Morbidelli M100 was manufactured in 2019. It features a large working area of 3110 × 1620 mm, 21 vertical and 12 horizontal spindles, and a maximum rotation speed of 8,000 rpm. The machine includes vacuum suction cups and has been used for approximately 1,500 hours. Consider the opportunity to buy this SCM Morbidelli M100 CNC Wood Machining Centre. Contact us for more information about this machine. Duodpfjyab Axsx Acxsp • Machine Condition: Excellent, very little use • Configuration: 5-axis CNC machining centre • Working Area (X × Y): 3110 × 1620 mm • Vertical Spindles: 21 • Horizontal Spindles: 12 • Maximum Rotation Speed: 8000 rpm • Vacuum System: Including vacuum suction cups

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Dusdpfx Ajidmkrjcxop Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Numerical Control "TPA" Albatros. Composed by: 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) Dedpfx Ashvagkjcxsup - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor