Edgebander

HOLZ-HER

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 161/1-10, functionality: fully functional, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, overall weight: 1,500 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 7 1st unit: Pre-milling unit 2nd unit: Gluing unit 3rd unit: Pressure rollers 4th unit: Edge trimming unit 5th unit: Rough milling unit 6th unit: Corner rounding unit 7th unit: Edge planing unit MACHINE DETAILS Voltage: 400 V Current consumption: 38.85 A Fuse rating: 50 A Dimensions & Weight Dimensions (L x W x H): 5,500 x 1,500 x 2,580 mm Weight: 1,500 kg EQUIPMENT Tools: Pre-milling unit Gluing unit Tools: Pressure rollers Tools: Edge trimming unit Tools: Rough milling unit Tools: Corner rounding unit Hnedoz Ni Rmspfx Abkju Tools: Edge planing unit CE marking

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Hnedsw Ad Rropfx Abksu Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 109/1-606, functionality: fully functional, operating hours: 12,415 h, overall weight: 4,800 kg, No minimum price – guaranteed sale to the highest bidder! Hnjdpfx Ajz Ni Hnjbkeu The machine has the following configuration: Number of units: 11 Pre-milling unit Gluing unit Pressure rollers: Type 1914 Cutting unit: Type KA701 Rough milling unit: Type 1828 Fine milling unit: Type FR701 Edge rounding unit: Type FF701 Radius drawing unit: Type ZK501 Straight edge drawing unit: Type 1856 Brushing unit: Type ES701 Gluing system Gluing system: Glue pot TECHNICAL DETAILS Edge band thickness: 3–20 mm Panel thickness: 8–60 mm Panel width: max. 65 mm Panel length: 180–250 mm Feed speed: 10–25 m/min Feed control: stepless MACHINE DETAILS Voltage: 400 V Current consumption: 45 A Dimensions & Weight Dimensions (L x W x H): 9,050 x 1,200 x 2,200 mm Weight: 4,800 kg Transport packages: 2 units Operating hours: 12,415 h EQUIPMENT Tools for pre-milling unit available Tools for pressure rollers available Tools for cutting unit available Tools for rough milling unit available Tools for fine milling unit available Tools for edge rounding unit available Tools for radius drawing unit available Tools for straight edge drawing unit available Tools for brushing unit available CE marking Documentation

Condition: used, machine/vehicle number: 008492, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR, Laser Premilling Unit: yes Corner Rounding Unit: yes Hsdpfx Abjz S T U Iekenu Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Hnjdszb N T Uspfx Abkju Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Storage location: Nattheim

Condition: used, machine/vehicle number: 008493, Introduction system: with grippers Hsdpfxjz S T Uus Abkenu

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Hnedpezzfr Ejfx Abkeu Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Hnedpfx Ajnxkm Ejbksu Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Hjdpfx Abez St Smekjnu Total length 3700 mm Feed speed 8 m/min. Weight 850 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 6 kW (8.16 HP), workpiece height (max.): 51 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, overall weight: 800 kg, UNO 1302, manufactured in 2007, edge thickness up to 3mm, workpiece height up to approx. 45-51mm, glue application via cartridge system, automatic edge infeed, flush trimming front and rear, combination routing unit for flush and radius routing (3mm), extendable workpiece support, motor power approx. 6kW, L x W x H approx. 3200x1300x1400mm, weight: approx. 800kg. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information is without guarantee. Hedjz R Uuzopfx Abkonu

Condition: used, Surface and thickness planer Scheppach HMC3200, year of manufacture 1993, in good condition, 2.9 kW, 320 mm table width, 1380 mm table length, 150 kg Hnodox H Ugxepfx Abkou Price changes reserved, subject to errors and typographical mistakes.

Condition: good (used), Year of construction: 2008, functionality: fully functional, SINGLE-SIDED EDGE BANDING MACHINE FOR PROCESSING MELAMINE, PVC & SOLID WOOD EDGES using EVA or PUR adhesives Total machine length 5,905 mm Workpiece thickness min./max. 6 - 60 mm, depending on edge thickness Edge band thickness 0.4 - 8 mm, depending on configuration Workpiece width min. 60 mm Workpiece length min. 180 mm Feed rate 18 m/min. without copying, 8 m/min. with copying Router unit with 2 motors at 2.0 kW each, 12,000 RPM pneumatically controlled, operating in both forward and reverse directions Roller platen 820 mm Glue application 1906M cartridge for cartridge magazines for EVA and PUR adhesives, with glue nozzle application unit Pressure zone with one main pressure roller and 2 follower rollers manually adjustable Trimming unit 1918 with 2 motors at 0.22 kW each, 9,000 RPM swiveling 0 - 10 degrees Multi-function router unit 1942 MOT 2 2 router motors at 0.6 kW each, 18,000 RPM, motor-adjustable swiveling 0 - 15 degrees Radius scraping unit 1929 up to max. radius R3 Hnodez R Sw Tspfx Abksu Copy router unit 1832 with 1 motor, 0.22 kW, 9,000 RPM Surface scraping blade 1964 Controlled from above and below Buffing unit 1940 2 motors at 0.12 kW each, swiveling 0 - 5 degrees Control: POWER-PC for efficient setup and changeover Windows-like user interface Simple program selection All information in plain text Extendable support rail approx. 500 mm

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,400 kg, product length (max.): 4,930 mm, Edgebander manufactured in 2019. This HOLZHER STREAMER 1057 XL features a feed speed of 10 m/min and accommodates workpiece thicknesses from 8 to 60 mm. It includes a comprehensive glue application system, infeed and outfeed spraying systems, and various units for trimming, sanding, and scraping. If you are looking to get high-quality edgebanding capabilities, consider the HOLZHER STREAMER 1057 XL machine we have for sale. Contact us for further details. • Feed speed: 10 m/min Hodpfx Ajz R Ribobkenu • Workpiece thickness: 8–60 mm • Edge thickness: 0.4–6 mm • Minimum workpiece length: 160 mm • Minimum workpiece width: 65 mm • Glue application system • Infeed spraying system • Milling unit • Pressure unit with 3 rollers • End trimming unit • Trimming and corner rounding unit • Corner sanding unit • Radius scraper • Flat scraper • Outfeed spraying system

Condition: used, Holz Her Perfect 1422 K + PU Heavy-duty version, for edge banding up to 20 mm thickness Fully automatic roller magazine – crosscut shear Fully automatic edge magazine for strip material Cartridge + PU gluing station Flush trimming Multifunction milling unit, flush – chamfer – radius milling with mechanical digital adjustment Soundproof enclosure Hnjdpfoy Rm Iisx Abkju CE-compliant design Machine is FUNCTIONALLY TESTED and in VERY GOOD CONDITION available ex-stock Lieboch

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Hodpfxszt Twyo Abkenu Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools: