Decoilers for Coils

HESSE by COILTECH CMC S 2500 400 M D1300

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Bljdpfx Aeg U Utvecvjf Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: good (used), TECHNICAL DATA Bledpeu Uic Tsfx Acvef AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2017, Cell with TIG-OTC-NH52-NEFC welding robotCountry of origin of the cell: Italy Year of manufacture: 2017 Country of origin of the robot: Japan Brand: OTC NH5 Year of manufacture: 2016 Number of axes: 6 Reach: 866 mm Bsdpjm Uyhhefx Acvjlf Load capacity: 5 kg Control: OTC FD 11 Source: OTC DA 300-P Cell dimensions: Length 3500 mm 1900 width mm Height 2400 mm

Condition: ready for operation (used), motor power 11kW Bledpfx Ajnr Hhiscvef working pressure 10bar capacity 1,59m3/min

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc. Blsdpofv Avvefx Acvof

Condition: excellent (used), Year of construction: 2007, operating hours: 25,181 h, functionality: fully functional, EQUIPMENT: Synchronous spindle Driven tools C-axis Rear-side machining Bledpfxoyk A Ukj Acvjf Parts conveyor belt FMB Turbo bar feeder magazine Chip conveyor

Condition: as good as new (ex-display), Year of construction: 2015, operating hours: 5 h, functionality: fully functional, overall weight: 150 kg, load capacity: 6 kg, arm reach: 1,445 mm, repeat accuracy: 0.06 mm, Industrial welding robot with a payload of 6 kg and a reach of 1445 mm. Bljdpsqcunasfx Acvsf The robot served as a demonstration exhibit.

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Bjdpjm Rpy Rofx Acvslf Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), A precise Kuris textile cutting machine including peripheral equipment is available. Cutting height: 55mm, max. cutting speed: 45m/min, positioning speed: 60m/min, working width: 1930mm, machine weight: approx. 4000kg. Including 50kW vacuum pump and tables. Documentation available. On-site inspection is possible. Bledpfx Acev R Ew Rjvjf

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Bledpfx Acjxmurrsvof