Edge banding machine

Hebrock F4

Condition: new, Year of construction: 2026, Hebrock F 4 For the complete processing of your panels For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Hodpfx Aehqadcodwju Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Double roller pressure (ball-bearing mounted) Transport chain with permanently screwed-on special chain plates Edge router Routing unit Miter saw Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Hjdpfx Asxbyx Tsdwou Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Full load current: 32 amp Main fuse: 35 amp

Condition: new, Year of construction: 2026, Pre-milling unit End Trim saw Top and Bottom Trimming unit Corner Rounding Unit Surface Scraper Touch Screen Controller Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5min. Hedpeglfwtofx Adweu Power consumption: ∅ approx. 7.4kW Electrical connection: 400V/3Ph/50Hz Table height: approx. 900mm Machine dimensions: approx. 4,050x1,300x1,400mm (LxWxH) Weight: approx. 820kg Exhaust connection: ∅ 1x140mm Edge Banding Machine with PLC Premilling (DIA-tools incl.) up to max. 2 mm milling depth Corner rounding unit Radiusmilling R=2 mm Radius edge milling R=2 mm radius profile scraper protection spraying edge

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: Root peeler AE-800, General: Hsdpfxet Av Igs Adwju The root peeler is an advanced device designed specifically for efficiently cleaning and peeling root vegetables such as potatoes, ginger, and carrots. Additionally, by using a soft brush attachment, it can also clean delicate fruits with thin skins. This machine stands out due to its high efficiency, advanced automation, and excellent peeling results. It significantly enhances production efficiency and reduces labor costs by swiftly and effectively removing skins from vegetables. The root peeler employs various peeling techniques, including steam peeling, scrubbing, and brushing. These methods ensure thorough skin removal while maintaining the quality and integrity of the produce. The machine's versatility allows for adjustments in peeling thickness and methods, accommodating different sizes and varieties of vegetables. Key Features: • Efficient Peeling: Equipped with high-speed rotating brushes and impact mechanisms, it ensures rapid and effective skin removal. • Multifunctional Use: Beyond peeling, the machine can clean, grade, and slice vegetables, catering to various processing needs. • Adaptability: It easily adapts to different vegetable sizes and varieties, with simple adjustments. • User-Friendly Operation: Featuring automated controls, the machine is straightforward to operate, understand, and manage. • Labor-Saving: The use of this peeler drastically reduces the need for manual labor, boosting overall production efficiency. • Hygienic and Eco-Friendly: Constructed from food-grade 304 stainless steel, the machine meets food hygiene standards, is easy to clean, and environmentally friendly. Regular cleaning and proper handling are necessary to ensure the equipment operates smoothly and safely, minimizing the risk of accidents from improper use. Overall, this root peeler is a robust and versatile solution for the efficient processing of root vegetables and soft-skinned fruits, making it an indispensable tool in any food processing setup.

Condition: new, functionality: fully functional, Year of construction: 2021, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, working height: 650 mm, machine/vehicle number: SM20215245, Equipment: documentation/manual, Well-maintained Lantech C-1000, right-hand stainless steel model, 2011 Stainless steel version Speed: approximately 25 boxes per minute, suitable for right-hand American folding boxes/Fefco 0200/0201 Hodpfst Dn Hqjx Adwju Also available: Lantech C-2000, C-1000, C-300, C-400, CS-300, MFC-2000, hotmelt, Nordson, Robatech.

Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combi version), robust chain drive, double roller upper pressure with ball bearings, inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Including: Hjdpfjwmdbrsx Adwsu F2/500/10 Whispercut pre-milling head F2/500/20 Combination milling head F2/500/2 Radius cutter R=2mm F2/12 Surface scraper (incl. pneumatic lift)

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks Hsdpfxjxmrwfs Adweu • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: new, Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel stop with micrometric fine adjustment. Slant adjustment of the saw blade up to 45° using a handwheel. Table opening ø190 mm with under-table suction. Milling stop 180 mm. Built-in milling spindle lock. Laying table with telescopic stop, eccentric clamp, degree grid 100% Made in EU (developed, built, quality tested) Technical data: Surface planing unit: Table width: 410 mm Table length: 1800 mm Planing shaft diameter: 100 mm Number of planing knives: 4 pieces Shaft speed: 5000 Motor output power: 5 kW S6 400V (4 kW S1) Thickness unit: Thickness passage, min/max: 4 - 230 mm Feed speed: 7 m/min Milling machine: Useful length of the spindle: 125 mm Height adjustment of the. Spindle: 160 mm Max. tool diameter when profiling: 180 mm when tenoning: 250 mm Spindle speed: 8000/6000/3500/1400 Hsdpfx Asvrvcaodwju Table openings: 190 mm Integral stop: 500 mm Motor output power: 3.8 kW S6 400V (3kW S1) Circular saw: Format table: 2300 x 285 mm Saw blade diameter max/min: 315 mm/250 mm Incline position: 90° - 45° Max. cutting height: 90° 45 ° Saw blade 315: 102/72 Motor output power: 3.8 kW S6 400V (3kW S1) Weight: 900 kg Optional accessories: Reversible blade (no extra charge) Spiral planer shaft Long hole board Scoring unit

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: AE-180, General: The root peeler is an advanced device designed specifically for efficiently cleaning and peeling root vegetables such as potatoes, ginger, and carrots. Additionally, by using a soft brush attachment, it can also clean delicate fruits with thin skins. This machine stands out due to its high efficiency, advanced automation, and excellent peeling results. It significantly enhances production efficiency and reduces labor costs by swiftly and effectively removing skins from vegetables. The root peeler employs various peeling techniques, including steam peeling, scrubbing, and brushing. These methods ensure thorough skin removal while maintaining the quality and integrity of the produce. The machine's versatility allows for adjustments in peeling thickness and methods, accommodating different sizes and varieties of vegetables. Key Features: • Efficient Peeling: Equipped with high-speed rotating brushes and impact mechanisms, it ensures rapid and effective skin removal. • Multifunctional Use: Beyond peeling, the machine can clean, grade, and slice vegetables, catering to various processing needs. Adaptability: It easily adapts to different vegetable sizes and varieties, with simple adjustments. • User-Friendly Operation: Featuring automated controls, the machine is straightforward to operate, understand, and manage. • Labor-Saving: The use of this peeler drastically reduces the need for manual labor, boosting overall production efficiency. • Hygienic and Eco-Friendly: Constructed from food-grade 304 stainless Hsdpfxet Av H Ae Adwju steel, the machine meets food hygiene standards, is easy to clean, and environmentally friendly. Regular cleaning and proper handling are necessary to ensure the equipment operates smoothly and safely, minimizing the risk of accidents from improper use. Overall, this root peeler is a robust and versatile solution for the efficient processing of root vegetables and soft-skinned fruits, making it an indispensable tool in any food processing setup.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Hsdpsxg Tfqsfx Adwsu