Complete sawmill (stationary)

Hauslhof 2-HBB650

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 627 kg, maximum load weight: 2,073 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2, Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Sideboard height: 30cm Loading platform height: 66cm Total weight: 2700kg Payload: 2073kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT 2x 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on wood floor Automatic jockey wheel with 400kg support load Bodpfx Apoghpcaj Ioww 6 noise-reducing lashing eyes with 800kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lamps with reversing light and triangular reflectors Upper frame mounted on rubber bearings Large tipping angle of 51 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Sideboard height increased to 35cm -Black Edition (Powder-coated sideboards and rims in black) -Integrated loading ramps 2800kg -Electric tipping operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work when the vehicle is tilted -Folding crank for rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension sideboards 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm or 180cm Further accessories available on request! Plus shipping to Gera and vehicle registration certificate, 200 € net Pictures are for illustrative purposes and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 10-12-10-064, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,000 mm, saw blade diameter: 500 mm, Equipment: saw blade guard, scorer, ALTENDORF F45 – Panel saw, manufactured in 2010 Equipment according to the Altendorf factory archive, confirmed on July 31, 2026: - Manufacturer / Model: ALTENDORF F45 - Year of manufacture / Machine number: 2010 / 10-12-10-064 - Double sliding table: Table length 3,000 mm - Cutting width: 1,000 mm - Main motor: 5.5 kW (7.5 hp) - Saw blade diameter: max. 500 mm - Control: C-terminal on the machine stand - Scoring unit: 2-axis, with RAPIDO scoring system - Clamping system: Standard (toothed nut) - Table extension: 840 mm - Stops: Angle/miter stop; DUPLEX up to 1,350 mm - Electrical connection: 400 V / 50 Hz Complete video with original audio available in the advertisement. Price upon request. Offer includes free loading onto a truck. Inspection, loading, and transport by arrangement. Scope of delivery according to individual offer. Bodpfjztwvajx Ap Isww Taken over from a carpentry workshop in Reutlingen. Machine location: TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). Consultation and sales handled by DS-Maschinen in Stuttgart.

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Bwedpfxjwa Ax Aj Ap Iow

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg Bjdpfx Apohfufgo Ioww

Condition: good (used), functionality: fully functional, power: 216 kW (293.68 HP), fuel type: diesel, overall weight: 24,000 kg, Year of construction: 2008, operating hours: 9,800 h, Equipment: all wheel drive, cabin, New Holland W270B wheel loader, year of manufacture 2008, approximately 9,800 operating hours, in good condition, immediately ready for use, permissible total weight 24,000 kg, transport and delivery possible, located near Lübeck, viewing possible at any time. Bjdpfxszbuqlj Ap Isww

Condition: new, DEMONSTRATION MACHINE For sale is a like-new band sawmill with a cutting length of 3,700 mm. The demonstration machine is in its original condition, therefore you will receive the full warranty. - Max. log diameter 550 mm - Max. board width 530 mm - Max. cutting length 3,700 mm (3.7 meters), extendable! - Min. cutting length 900 mm (0.9 meters) - Saw band stroke min./max. = 20/540 mm Bsdpfevy Ufvox Ap Ioww - Max. cutting depth 220 mm - Pulley diameter/width = 400/25 mm - Motor power 5.5 kW (4.0 kW S1/100%) - Motor power for height adjustment 0.12 kW - Saw band length 3,200 mm - Saw band speed 15 m/s - Overall length of the basic version 4,600 mm (4.6 meters) - Weight approx. 350 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: band sawmill, log band saw, band saw, machine Reference: R-A0117

Condition: new, Year of construction: 2026, Key features 5 functions in one machine Straightening width: 400 mm Sealing width: 400 mm Max. sealing height: 220 mm Saw blade diameter: 300 mm Cutting height: up to 100 mm (90°) Saw blade tilt: 0–45° Sliding table: 1800 mm Router: spindle Ø30 mm, 4 speeds Drill (mortiser): chuck 16 mm Motor: 3 × 3.0 kW (option 3 × 4.0 kW) Power supply: 380 V Weight: approx. 645 kg Advantages Robust cast iron construction Bwodezl Nz Sepfx Ap Iew Precise aluminum sliding table Fast function change High processing accuracy Suitable for professional woodworking shops Reliable operation with minimal maintenance

Condition: used, Year of construction: 1998, LBL Brenta Oxia -max. cutting height 150mm Bwedpsvw Rnbofx Ap Isw -max. passage width 1000mm -multi-blade saw with fixed saw attachment

Condition: good (used), Year of construction: 1996, Woodworking machine, circular saw VEMA TKS LBM, year of manufacture 1996, with milling and drilling attachment. Data for milling and drilling attachment: Speed: 3,000 rpm, table size: 570 x 300 mm, drilling depth: 150 mm, drilling length: 210 mm, height adjustment: 170 mm, two-jaw chuck: up to 20 mm. Data for saw: Speed 3000-6000 rpm, blade up to 450 mm, cutting height up to 155 mm, bevel cut 0°-45°, table dimensions 1260x1100mm, width can be extended with a fence, length 2200mm, extra table 750x950mm. Bwjdpfx Apohvaphj Ijw

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VRWG3SNACD0000410, Year of construction: 2013, operating hours: 1,601 h, load capacity: 700 kg, fuel type: electric, battery capacity: 180 Ah, battery voltage: 24 V, front tire type: pneumatic tires (air-filled), rear tire type: pneumatic tires (air-filled), Equipment: cabin, lighting, Goupil G3 platform truck, year of manufacture 2013 with full cab Specifications: Goupil G3 Year of manufacture: 2013 Recorded operating hours (h): 1601 Overall height (mm): 1950 Payload (kg): 700 Front tyres: Pneumatic Bwsdpfsy H Evwsx Ap Ijw Rear tyres: Pneumatic Battery year: 2013 Battery capacity (Ah): 180 Battery voltage (V): 24 Extras: Full cab with heating. Front windscreen wiper. STVZO. Indicators etc. Rotating beacon. Note: Vehicle dimensions: L: 3300 mm W: 1250 mm H: 1950 mm Loading platform: L: 1870 mm W: 1040 mm H: 300 mm