Suction position

Höcker Polytechnik

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Equipment and technical data: - Transport fan - 22 kW - Motor 22 kW - 400 V - 2955 rpm - Volume flow 9000 m³/h - 4500 Pa - Suitable for dust and chips - Freely positionable installation - Motor block on the side - Direct drive - Open impeller design - Suction nozzle 400 mm; expanded to 450 mm - With flange ring - Pressure nozzle 400 mm; expanded to 450 mm - With flange ring - Dimensions approx. 1200 x 1100 x 1350 mm - Weight approx. 880 kg Availability: short-term Laedpozdlwtsfx Amroc Location: 63934 Röllbach

Year of construction: 2026, condition: new, IWR 2000D - The fruit washer with mill for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water and, after pre-washing, transported via the conveyor belt where they are thoroughly cleaned with fresh water. Afterwards, the cleaned fruits enter the mill, where they are processed to the desired mash consistency using the selected sieve. The washing system is also equipped with a dosing attachment for pack presses. Technical Information • Nominal capacity: 1500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L per batch • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • Swiveling Rätz mill • Equipped with rollable wheels Lsdpfx Amstu Ikcsreac • Easy to clean • Through the frequency converter, the conveyor capacity can be easily adjusted Dimensions: Length: 3250 mm Width: 840 mm Height: 2270 mm Weight: 160 kg

Condition: good (used), Year of construction: 1994, Working area approx. 2,080 x 1,430 mm, side impact plates on the right and left, filter area approx. 1,800 x 1,300 mm, 2 rows of paper volume filters approx. 650 x 1,800 mm, Ljdepvil Tjpfx Amrjac internal fine filter G4 approx. 1,350 x 2,000 mm, air flow rate 4,500 m³/h, pressure max. 500 Pa, motor 1.1 kW / 1,400 rpm.

Condition: excellent (used), Mobile Extractor Manufactured by Höcker Polytechnik Extractor Standard III A Intake diameter 160 mm Motor 2.2 kW 380 volts Air flow 2460 m3/h Year of manufacture 1992 Transport dimensions: Height with filter 2450 mm without filter 1460 mm Length 1170 mm Width 570 mm Ledpfx Aswl U U Hsmreac Weight 80 kg

Condition: used, CNC cycle-controlled turning machine HARRISON, Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture 1998 Center distance 1250 mm Turning diameter over bed 400 mm Center height 200 mm Turning diameter over cross slide 245 mm Diameter in the crotch 585 mm Ljdpfeh Hvk Ajx Amrsac Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill taper MK 5 Spindle bore 54 mm Spindle head size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Stage 1) 15-275 rpm Spindle speed range (Stage 2) 35-795 rpm Spindle speed range (Stage 3) 110-2500 rpm Feed rate X and Z 0.03 - 0.6 mm/rev Rapid traverse rate X-axis max. 2000 mm/min Rapid traverse rate Z-axis max. 4000 mm/min Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Power connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC - Language in French (France) - Automatic gear range selection in 3 stages (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with different gear ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set of soft jaws - Quick-change tool holder MULTIFIX Size B with 2 inserts - 1 live center - 1 quick-change drill chuck RÖHM, 3-16 mm - Folding chuck guard - Folding work area safety doors - Chip tray with coolant system under the machine bed - Control cabinet fixed to the machine - RS 232 interface Space requirement L x W x H 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Condition: used, Year of construction: 1999, total width: 900 mm, total length: 1,260 mm, total height: 1,450 mm, Empty weight: 389 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 1615 - Main motor power [kW]: 11 - Flow capacity [m³/h]: 5450 Laedpfxsxan Iae Amrjc - Negative pressure [Pa]: 3800 - Rotation speed [rpm]: 1450 - Connection diameter [mm]: 250 - Output diameter [mm]: 250 - Transport dimensions: 1260mm x 900mm x 1450mm (l x w x h) - Transport weight [kg]: 389kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, total width: 1,200 mm, total length: 800 mm, total height: 1,100 mm, Colour: Blue Empty weight: 280 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 2477 - Main motor power [kW]: 7.5 - Flow capacity [m³/h]: 71 - Negative pressure [Pa]: 315 - Rotation speed [rpm]: 2900 - Connection diameter [mm]: 300 - Output diameter [mm]: 300 - Rotor material: Metal - Voltage [V]: 400 - Current consumption [A]: 13.8 Lajdew N I U Hepfx Amroc - Fuse [A]: 16 - Power [kW]: 7.5 - Transport dimensions: 800mm x 1200mm x 1100mm (l x w x h) - Transport weight [kg]: 280kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Ljdpfxji A Ix Hj Amrjac

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Extraction system Höcker Polytechnik Lodpfx Amezc N Dpsrsac Type: MultiStar JP5 Year: 2012 Capacity: 20,000 m³ Motor: 30 kW with briquetting press BrikStar c-3 18 Negative pressure system Filter surface area: 121.3 m² Filter bags: 100 pieces Bag length: 2,300 mm Bag diameter: 170 mm (outside, pressurized) Compressed air connection: 6.0 bar, 1" Operating pressure: 4.5 bar Compressed air consumption: approx. 216 Nl per bag row Footprint L x W: 2,540 x 2,420 mm Space required L x W: 3,500 x 3,380 mm Internal height: 4,430 mm Weight approx.: 1,960 kg Duct bend 90°, 2 mm, 900 x 800 mm, 1 pc Bolted design, galvanized steel sheet, 2 mm duct dimension 1: 900 x 800 mm, duct dimension 2: 900 x 650 mm, shape: asymmetric 460406 duct, 2 mm, 750 mm length, 900 x 800 mm - 2 pcs bolted, galvanized steel sheet, 2 mm 1 blank cover 2 mm, 900 x 800 mm 1 pc for MS xP on BrikStar 1 pc 300 x 2,300 mm on existing briquetting press Manufacturer Gross (approx. 1,100 x 1,100 mm / press height: 1,260 mm)

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Lajdjyym A Sspfx Amrsc

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m Ledpfxjtqqr Ro Amreac - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: used, Year of construction: 2014, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,000 m³/h, overall weight: 900 kg, inlet: 300 mm, negative pressure: 2,900 Pa, rotational speed (max.): 3,000 rpm, We offer our Höcker Polytechnik Vacumobil JT300-L – Industrial Dust Extraction Unit The Höcker Polytechnik Vacumobil JT300-L is a high-performance mobile industrial dust extraction system, designed for continuous operation in demanding woodworking and production environments. Equipped with automatic jet-cleaning (compressed air filter cleaning), this unit ensures consistent suction performance without downtime, making it ideal for workshops running multiple machines simultaneously. Key Specifications: Motor power: 7.5 kW Airflow capacity: 6,000 m³/h Working airflow: 5,100 m³/h Negative pressure: 3,100 Pa Filter surface area: 28 m² Extraction inlet: 300 mm Lasdsygw Rxepfx Amrsc Collection capacity: large multi-bin system 500 liters Main Advantages: Continuous operation thanks to automatic jet-cleaning system High extraction capacity – suitable for multiple machines (CNC, edge banders, planers, etc.) Industrial-grade safety features, including backflow protection and integrated fire safety options Energy-efficient motor technology (IE3 / optional IE5) Robust and reliable German engineering Applications - perfect for: Woodworking workshops CNC machining centers Furniture production Medium to large industrial operations The JT300-L offers nearly double the capacity of smaller models (e.g. JT200), making it the ideal solution for businesses looking to scale up production while maintaining a clean and safe working environment. We also sell our smaller Höcker Polytechnik Vacumobil JT200-L on Machineseeker. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2014, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 3,400 m³/h, noise level: 71 dB, overall weight: 425 kg, extraction connection diameter: 200 mm, nominal flow rate: 3,400 m³/h, negative pressure: 2,900 Pa, rotational speed (max.): 3,000 rpm, We offer this used Höcker Polytechnik VACUMOBIL 200 mobile exhaust system, year of construction 2014. Manufacturer: Höcker Polytechnik Model: VACUMOBIL JT200-L JT = jet cleaning (compressed air filter cleaning) The JT version is an upgraded version of the VT (vibration cleaning) version. The JT200-L is ideal for continuous use (CNC, planing line, nesting) Better continuous operation Less maintenance during intensive use Type of input current: three-phase Negative pressure: 2.900 Pa Laodpjygw Iqsfx Amrec Volume flow: 3.400 m³/h Overall weight: 425 kg Input voltage: 400 V Suction socket: 200 mm Power: 4 kW Rotational speed (max.): 3,000 rpm Input frequency: 50 Hz We also sell our JT300-L model on Machineseeker. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, with dust extraction automatic belt centering tool-free belt change sanding belt 2000 x 150 mm platen sanding area 500 mm belt speed 15/30 m/s weight 120 kg motor with pole change 2.2/3.75 kW dust extraction motor 0.37 kW Lasdsckk Rijpfx Amrec machine dimensions 950 x 430 x 1050 mm Scope of delivery: including sanding belt grit 60 dust bag DELIVERY: FREE TO YOUR DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 2009, total width: 1,400 mm, total length: 1,400 mm, total height: 1,300 mm, Colour: Blue Empty weight: 350 kg - Year: 2009 - Documentation available: No - CE certificate present: No - Serial number: 20902103 - Main motor power [kW]: 37.5 - Flow capacity [m³/h]: 20500 - Negative pressure [Pa]: 5000 - Rotation speed [rpm]: 3000 - Connection diameter [mm]: 660 - Output diameter [mm]: 460 - Type of rotor: Yes - Voltage [V]: 400 - Current consumption [A]: 65 - Fuse [A]: 80 - Power [kW]: 37.5 - Transport dimensions: 1400mm x 1400mm x 1300mm (l x w x h) - Transport weight [kg]: 350kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ljdezavuiepfx Amroac Yorick Diebels