Optimization cross-cut saws H&M HM-D 6500-R 2001

H&M HM-D 6500-R

Condition: used, Year of construction: 2002, - Year: 2002 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nwjdewnh T Iopfx Aghjp Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, ATLAS AB 1302 mobile excavator, used condition, empty weight: 11.8 t Nwsdpsw S Ix Rsfx Aghjp

Condition: new, Year of construction: 2025, 20T Premium Plus Ramp, usable internal width 20m. TM-GROUP – the best choice on the market. ⭐️ Galvanized grid on the ramp’s upper section as well! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP - Maximum load capacity: 20 tons - Internal ramp width: 2000 cm - PREMIUM PLUS variant – galvanized grid also on the upper ramp section (highlighted in red in one of the last photos) - ELECTRIC and manual height control from 1m to 1.6m - Galvanized approach grid - Reinforced side railings on both sides - Solid rubber transport wheels - Central ramp handle allowing repositioning with a forklift - Adjustable tilt and flap height - Reinforced dual-sided ramp supports - Moving parts equipped with grease fittings - Ramp also equipped with a hand winch ✅ Approach Grid: Galvanized grating with anti-slip grooves. A secure and stable surface. Both forklift operation and foot traffic benefit from top-tier grip and solid support. Competitors mainly offer ramps with a metal sheet covered in mesh. Our product features a grooved grating, a much more durable solution. It prevents debris from staying on the ramp and ensures forklifts don't slip. ✅ Forklift Bracket – installable on both sides: Convenient and quick mounting for forklift transport in all directions. A specially designed bracket allows for maneuvering the ramp even in confined spaces. ✅ Chain for connection to TIR truck, railcar, or fixed warehouse ramp: A solid steel chain is another strong point of our ramp, preventing unwanted movement during loading operations. ✅ Durable Side Railings: Protective railing with an option to unscrew and mount a frame/roof (roof is optional). ✅ Electric Height Control: Nwodpfx Agowb A Elehop Smooth electro-hydraulic drive using a high-quality pump. Requires 230V, meaning it can be powered from a standard socket. ✅ Dual-Action Manual Pump: Hydraulic pump for height adjustment when electro-hydraulic power isn't available – dual-direction lifting. Perfect solution for uninterrupted operation in any conditions. ⭐️ Available variants include: ⭐️ - Approach widths: 1700 cm, 2000 cm, and 2500 cm in Standard, Premium, and Premium Plus versions - Mobile ramps with capacities of 10 tons, 15 tons, 20 tons, and 25 tons - Approach grid thickness: 3 – 5 cm - Colors: red, blue, black, and green (custom colors available upon request) - Mobile ramp with tarpaulin cover As a manufacturer, we can produce custom ramps tailored to specific needs – various sizes, load capacities, or features. Can't find exactly what you're looking for in the listings? Ask our specialist for a tailor-made solution. Tags: Loading ramp, unloading ramp, mobile ramp, mobile loading dock, loading bay, mobile transfer ramp, mobile loading ramp.

Condition: good (used), Four side planer Weinig Unimat 23 Lamelling machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5,5 kW / 6 - 36 m/min, spindle arrangement: 1- Down ( 5,5 kW ) 2- Right ( 5,5 kW ) 3- Left ( 5,5 kW ) 4- Right ( 5,5 kW ) Nwedpfx Aspq T Rbeghjp 5-Top (11 kW) 6-Bottom (5,5 kW) 7-Top (7,5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table

Year of construction: 1996, condition: good (used), Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW Nwodpfx Agsh Dwl Djhjp feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg Njdpfx Agjvuhumohowp The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 Nsdpeg Hkmrsfx Aghswp - quick change tool holder size B - turning toolholder BD - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Condition: used, mileage: 210,000 km, Year of construction: 1981, Serial number: 104xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20686 Specifications: Model Year: 1981 Mileage: Approx. 210,000 km (subject to change) Transmission: Manual Engine Power: 305 hp Drivetrain: 6x2 Length: 795 cm Width: 248 cm Wheelbase: 420 cm Curb Weight: 10,300 kg Tires: See photos for condition Description: Scania 112H conventional truck from 1981 for sale.The truck starts and runs, and the tipper function works as it should.Some maintenance and repairs should be expected Quick delivery available upon agreement. Km: 210000 HK: 305 Technical approved: no EU-approved until: 21.10.2022 Own weight: 10300 Total Weight: 25500 Payload: 15125 Width: 248 Length: 795 Model: 112H Gearbox: Manual Nsdpfx Agowqwp Rehjwp

Year of construction: 2019, condition: as good as new (ex-display), Aluminum flat conveyor including 4 suspension points Dim: 3000 + 520 x 105mm Conveyor belt width 400mm PVC conveyor belt incl. Studs and wave edge * optional with magnetic deflection roller at the end of the conveyor belt. * optionally with substructure Nwodpfod Ra Ttjx Aghjp * Special designs in all versions possible.

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 3.875,- (net)! Price for transport within Germany (excluding islands): € 550,- (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! Nedpfx Agsddmq Tehswp A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/80 each with 2x3 adjustable. Arms 1.20 m, 500 kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!