Gram Equipment RIA 14 production line

Gram Equipment RIA 14

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll Bodpfx Afetiy Ntonewh 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Year of construction: 1996, condition: used, Co-pilot, starfeeder, rounding & backing, gluing, gauzing, book mark suction device, gluing, head & tail banding, pressing, casing-in, case prestacking, case bending, case forming, Kolbus FE 603, Kolbus DS 391 Hard cover book line Consisting of: Kolbus BF 525 - FE 603 - DS 391 Year: 1996 - 2000 - 2002 Description: - Automatic setting - Co-Pilot with touchscreen - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 603 Year: 2000 Description: - Pressing station - Right hand infeed Bwjdpfovw Al Eex Afnsh - Integrated hydraulic - Straight delivery Book stacker Kolbus DS 391 Year: 2002 - Turning device - Delivery in reverse direction - Straight delivery Book production line: Compact 2000 SC Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 125 mm Book block format (max): 270 x 375 x 80 mm Book block format (min): 100 x 125 x 4 mm Max. mechanical speed: 50 cycles/min . Book forming and pressing machine: FE 603 Product size (max): 315 x 385 x 90 mm Product size (min): 70 x 100 x 6 mm Max. mechanical speed: Up to 62 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system Bwodjvgu D Sjpfx Afnoh The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit Bwedpfeu D Amgsx Afnjh - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table Bedpstzmifofx Afnowh -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: new, Year of construction: 2025, functionality: fully functional, air pressure: 6 bar, Tube filling machine, tube filler Efficiency Up to 40 tubes per minute Dosing Range From 5 ml to 270 ml (High precision ensured by servo drives) Tube Diameter From 19 mm to 50 mm Tube Height From 70 mm to 210 mm Tube Material Heat-sealable (laminate/plastic) or aluminum tubes Dosing System Servo Drives (High repeatability) Control System PLC + Intuitive HMI Panel (with recipe saving capability) Formats One tube format included Automatic Tube Filling Machine JTB-40 Fenix | Up to 40 tubes/min | Wide Dosing Range: 5-270ml | Made in Europe. Professional Automatic Tube Filler JTB-40 Fenix - Perfect for Cosmetics, Chemicals and Pharmaceutical Production. We offer for sale the highly efficient, automatic Tube Filling Machine JTB-40 Fenix – a flagship model from Jedliński Packaging, designed for maximum precision and production flexibility. This reliable machine is the ideal solution for companies looking to optimize the tube packaging process for laminate (heat-sealable) and aluminum tubes. With a high output of up to 40 tubes per minute, the JTB-40 Fenix guarantees a significant acceleration of your production lines. Machine Dimensions and Ergonomics The JTB-40 Fenix Tube Filler features a compact, well-thought-out design, making it easy to integrate into existing lines: Height: 1.9 m Length: 1.7 m Width: 1.3 m Main Advantages and Standard Features Precise Dosing: The system based on servo drives ensures accurate dosing of products with various viscosities – perfect for tube filling creams, gels, pastes, and ointments. Process Automation: The machine automatically feeds, orients (using a marker sensor), fills, seals/closes, and codes the tubes, minimizing operator involvement.AISI 316 Materials: All parts in direct contact with the product are made of high-quality AISI 316 stainless steel – the standard required for cosmetics manufacturing and pharmaceuticals. Hot Air Sealing: The version for heat-sealable tubes uses reliable Hot Air sealing technology, ensuring an aesthetic and durable closure. Intuitive Operation: The control panel allows for quick parameter changes and switching between saved recipes.Inspection and ContactThe JTB-40 Fenix machine is available for immediate viewing and testing under load at our company premises. Please contact us to schedule a visit! Seller Contact Details: Bjdpok Abyvsfx Afnewh Company Jedliński Packaging sp. z o.o. Address ul. Wodna 3, 05-090 Raszyn, Poland Location Machine available for viewing and testing at the company's premises Don't miss out! Invest in a new quality of packaging with the JTB-40 Fenix automatic tube filling machine.

Year of construction: 2007, condition: like new (used), Technical data, please see in pdf document. Bjdpfx Aoha Dm Tsfnewh

Condition: new, Year of construction: 2023, total height: 1,850 mm, warranty duration: 12 months, input voltage: 380 V, power: 1.5 kW (2.04 HP), 1000L stainless steel mixer . All tanks are made to order . It is possible to make mixer from 100 to 3000 liters . We make : Mixers , Heaters , Pasteurizers , Cheese boilers and others . Bjdpoqqhzfsfx Afnjwh The given price is an example .

Condition: ready for operation (used), Bitzer refrigerant compressors unit Type: HSK7461-80-40P (x3) Volume: 220 m3/h (x3) Cooling capacity for R404A: 560 kW at - 5°C/40°C, 477 kW at -10°C/40°C, 338 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Bwjdpepgzhujfx Afnoh Condenser Thermofin Type: X-TCH 100.1-25-B-N(D5/S5) Cooling capacity: 963/852 KW Air flow: 295 000 / 234 000 m3/h Number of fans: 10 x 1000 mm Dimensions: 9800 x 2300 x 1600 mm Volume: 229.3 L Weight: 1 929 kg Control panel Dimensions: 2400 x 600 x 2000 mm We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: excellent (used), year of last overhaul: 2023, Seydelmann bowl cutter K206 DC8 Type: K206 DC8 Bowl capacity: 200 ltr Power: 100 kW 380V power supply 6-stage blade speed control 2 Bowl gears 2 Mixing gears Loading into 200 ltr carts Discharge Constructed of stainless steel Soundproofing cover Bwodsqpgqkopfx Afneh Unit dimensions: 2850 mm x 2950 mm x 1500 mm Dimensions of the control cabinet : 1200 mm x 500 mm x 1900 mm Stock: 1 piece Condition: Used