Eddy Current Separator

Goudsmit 1500 mm.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. Dsdpfx Ajua Tbwecyowd SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Dwjdpfx Acjxlngajysd Feel free to contact us if you have any further questions.

Condition: used, functionality: fully functional, usable tank capacity: 25,000 l, Item: AV-12176-Vertical Insulated Tank 25000L Exterior dimensions: Dia Ø 2550/2700 mm Total H 7000 mm. Vertical insulated tank 25.000 L Insulated with 50 mm wool completed with stainless steel trapezoid. Conical top with ventilation / cip. Conical bottom with 3" outlet. Manhole in lower part of cylinder. Powerful topmounted agitator. AISI 904 L Dwjdpfx Acouwdhloyjd

Condition: used, Year of construction: 2018, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 100035372, ICI CALDAIE GSX 3000 steam boiler put into operation in 2019, operation ended in 2024 fully functional Djdpfjzdyntox Acyjwd steam output 3000 kg/h steam pressure 12 bar thermal output 2044 kW thermal input 2246 kW water volume (total / operating level) 7000 l / 5000 l dimensions 2958 x 2650 x 4676 mm weight 10,530 kg flue gas outlet connection Ø 450 mm burner RIELLO R.B-L. RS 300/EV BLU 500 - 3800 kW

Year of construction: 2025, condition: new, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips.  Input material: 0-200 mm  Capacity: approx. 80 m³/h (material-dependent)  Material separation into 2 fractions: 0-25 mm and oversized fraction  To be mounted on customer-owned impact plates or a substructure Technical Data: Dwsdsg I Uqfjpfx Acyed  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area: 6.3 m², Number of shafts: 40 o Drive: 2 x 7.5 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes) o Bearing lubrication positioned externally; optional central lubrication available at an extra cost

Year of construction: 2020, condition: excellent (used), hopper with an integrated conveyor belt, featuring a metering screw at the front. Dwsdpfx Asilqfqecyed Length: 9 meters, width: 2 meters.

Condition: excellent (used), Year of construction: 2003, AZO Single Big-Bag Unloading System – Complete with Screening and Dust Extraction System --> vacuum conveying. - Year of manufacture: 2003 - Dimensions L x W x H: 1600 (+1400 mast) x 1600 x 5000 - Material: Stainless steel - Double vibration motors - Condition: Excellent! - Including hoisting motor. For sale: a robust and complete AZO single big-bag unloading system, suitable for the low-dust and efficient processing of powders, granules, and other bulk goods. Djdpfxozb I H To Acyowd This system is equipped with a heavy-duty crossbeam with a lifting capacity of 2,000 kg, allowing larger big bags to be handled easily. The included lifting beam with electric hoisting motor and remote control has a capacity of 1,250 kg, which ensures safe and user-friendly lifting and positioning of the big bags. For optimal product quality, the system is equipped with a vibrating screen installation, supplied with two different screen decks, making the system flexible for various products and applications. The installation has 2 vibration motors, one on the big bag saddle and one in the vibrating screen itself for optimal vibration. Behind the screen is a dust extraction system with a dust filter, which effectively limits dust formation during unloading and maintains a clean working environment.

Condition: refurbished (used), “SGM DIS 100” for Sale Dwsdpjy U N Exofx Acysd Manufacturer: SGM Magnetics Type: DIS 100 Belt widthness: 1.000 mm (New belt) Included: – New Control-unit Eddy Current Separator is overhauled, sandblasted and painted.

Year of construction: 2016, operating hours: 7,000 h, condition: excellent (used), functionality: fully functional, For sale: Terra Select T60 on crawler chassis Year of manufacture: 2016 with approx. 7,000 operating hours 81 kW JCB engine without Adblue Long discharge conveyors Extra-large feed hopper Djdpfjy Ahi Eex Acyewd Drum: 2,200 mm x 5,500 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,000 h, Equipment: CE marking, Weight: 7/9 tonnes - Electric motor power: 132 kW - Capacity: up to 800 MTPH - Maximum feed size: up to 600 mm - Standard product output sizes: 150/200 mm (little or no fines) (feed opening 1300 x 1500 mm) Field of application: Mineral industry and tunneling Capacity: Up to 882 [t/h] Mass: Depending on equipment, from 7.7 to 9.9 [t] Dodpfxjw Axb Eo Acyjwd Rotor center distance: 600 [mm] Feed: Depending on equipment, up to 800 [mm] Product: Reduction ratio 1:3 Rotor length: From 1000 to 1500 [mm]