CNC Lathe Giuseppe Giana - GGH 1100/760

Giuseppe Giana GGH 1100/760 x 12.000 CNC

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Hodpfjyg I Nfox Akiew Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle motor power: 26 W, spindle speed (min.): 20 rpm, spindle speed (max.): 2,800 rpm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 2,110 mm, total length: 4,636 mm, total width: 2,035 mm, spindle nose: ASA 11, overall weight: 6,900 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DOOSAN model PUMA GT3100L" complete with chip conveyor. Hedpfxjx N R E Aj Akiow

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Hedpfx Akex Ew Dqsiow Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Hodpetk It Sofx Akisw Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls Hjdpfjy D Ngzjx Akiew conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: good (used), functionality: fully functional, empty load weight: 11,800 kg, maximum load weight: 25,500 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/1998, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 245.70 R 17.5, color: red, Year of construction: 1998, Equipment: ABS, sem bertoja extendable cradle, 3 axles with 2nd and 3rd steering, air suspension, abs, year 1998, 5.30m cradle with additional 3.50m extension, height from ground 45cm, extractable module above the axles, adjustable detachable neck, control wire for steering self-steering axles, good condition, INTERDRIVE SRL-PARMA DEALER Hodewg E Rbopfx Akiow

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm Hodpfezc D Ensx Akiow No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Siemens Sinumerik ONE control system, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, 24-position tool changer, Linear axis speeds X/Y/Z 24 m/min, Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor, Renishaw probing system kit, Coolant spray gun, Enclosure roof, Internal high-pressure cooling 20 bar, Bed flushing via M-function, Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator Ø 150 mm, 4th axis package, LEHMANN rotary table EA-520.L, with automatic spindle clamping, Center height: 180 mm, Compact and stable tailstock with large roller bearing, Prepared for automatic clamping, Permissible hydraulic pressure max. 220 bar, Steel clamping bridge L/W 600/270 mm, Base plate steel, Hsdpfx Asza Apaskiow Tropical package, Active cooling unit for control cabinet, Blow-off air externally and internally (through spindle center) can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 2100 spindle hours.

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm Hsdpfx Asy Ty Ihekijw spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: used, functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 82 mm, turning diameter over bed slide: 870 mm, overall weight: 4,000 kg, spindle mount: MK 5, Conventional Lathe Brand: Geminis Model: GE 870 Power: 12.5Hp Distance between centers: 4,000mm Maximum swing over bed: 870mm Maximum swing in gap: 1,100mm Maximum swing over carriage: 580mm Gap length: 340mm Spindle bore: 82mm Speeds: 18 (16-1250) Carriage width: 620mm Tailstock: Morse taper 5 Hjdpfxjyc Rylo Akiew Includes: - 3-jaw chuck 310mm with internal, external, and soft jaws - Faceplate 700mm - Steady rest (closed type) 360mm - DIN backplate for 330mm chuck - Main faceplate / accessory 500mm - Various gears for different thread types Weight: 4,000kg