FINSCAN moisture meter scan

FINSCAN Moisture meter

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m Kjdpfx Aievbtpsfedl -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm

Condition: new, Year of construction: 2024, Boring and inserting machines Rilesa Vlg 2200 new 2023 Make: Riles Model: Vlg 2200 Description: Condition: new Year: 2023 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Machine Tools equipment in Poland Subcategory: Drills Kdsdsgbpmhopfx Aifjl Subcategory 2: Drilling machines Description DRILL DRILL WITH STORAGE 8 DRILLING UNITS TWO FRONT RIGHT AND LEFT, 3 UPPER AND 3 BACKS Year: 2023 new

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW Kedpfx Asrigxyoifedl fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Year of construction: 1998, condition: ready for operation (used), A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible. Kdjdpewv Umwsfx Aifol

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Kedpfx Aowdutmjifsdl Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Kodpfxeu Damdo Aifjdl

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. Kodpovf E Avofx Aifjdl We accept no liability for the technical specifications or any errors.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, power: 45 kW (61.18 HP), input voltage: 400 V, For sale Spanner Biomass cogenerator station with 9 units. Model - BHKW45-8,0-V1.1 Year - 2015-2017 Kodpfx Aijvcbtrsfsdl Nominal power - 6x45KW, 3X50KW Voltage - 400V Frequency - 50HZ Current - 3 phase Engine - 8.0L Price shown per unit. 1 unit includes: Biomass gasifier, generator that converts the gas with engine to electricity, separate control cabinets for gasifier and generator. Price is discussable. Please see attached documents. Preferred text communication via e-mail or whatsapp.

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Canon imagePRESS C9010 VP’ Object of sale: 1 x Canon imagePRESS C9010 VP with the following equipment: incl. Prisma Controller or Fiery incl. booklet finisher N2 incl. High Capacity Stacker H-1 incl. POD Deck D1 Counter readings: Total: Approx. 1,880,920 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Kedpju Ecl Ejfx Aifedl Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information you can of course also contact us personally.

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Heating power of the press 72kW Maximum capacity of the press up to 2000 m2 / 7.5h Kdsdpsrqzgksfx Aifjl Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821