Injection Moulding Machine

Engel E-DUO 740H/740L/700 combi

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,871 h, clamping force: 7,000 kN, screw diameter: 40 mm, total height: 2,500 mm, overall weight: 20,000 kg, This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. A robust hydraulic injection moulding machine, it features a system size of 8.5 m x 2.5 m x 2.5 m and a total weight of approximately 20,000 kg. It includes dual 3-zone screws and 32 hot runner control circuits. Consider the opportunity to buy this Engel E-Duo 740H-740L-700 combi. Contact us for more information. • 2 x 3-zone screws d50 / 32 hot runner control circuits • Max mold weight (total): 11000 kg / max mold weight per plate: 7300 kg / max distance of the molds center of gravity from clamping surfaces: 315 mm • Opening force (with pressure pad) kN 510 • Opening force: 130 kN • Platen size (H × V): 1510 × 1440 mm • Distance between tie bars (H × V): 1100 × 960 mm • Tie bar diameter: 175 mm • Max. mold weight: 11000 kg • Injection Unit 1 • Injection capacity: 318 cm³ Ffodpex D E Dtsfx Afnou • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s • Injection rate: 281 cm³/s • Nozzle stroke: 600 mm • Heating wattage: 16 kW • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm • Injection Unit 2 • Injection capacity: 318 cm³ • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s • Injection rate: 281 cm³/s • Injection pressure (regenerative): 2400 bar • Nozzle stroke: 600 mm • Heating capacity: 16.2 kW • Number of heating zones incl. nozzle: 6 • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm Dimensions Machine Depth 8500 mm

Condition: like new (used), Year of construction: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. distance between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Mould platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main drive power: 265 kW Oil tank capacity: 1,600 l Ffodpfx Afjw Aw Taonju Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated via the machine control panel Machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical sectors). Machine is still powered, test possible. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operation video, technical documentation, and arrange a convenient date for a visit.

Condition: new, Year of construction: 2025, functionality: fully functional, The granulate mixer is available in 6 versions: Design can be stainless steel or painted steel: Technical specifications : MV 2 The MV 2 for the complete mixing of all plastic granules, due to the forced guidance by screw sleeve. Tank capacity : 120 kg/ 200L L x W x : 700 mm x700mm x height: 1050mm/ 1250mm - screw, removable Fsdpfjd R Atrsx Afnefu - Control for mixing times - suction device - 1 drain - Underframe mobile, castors 100 mm, all with locking brake.

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set Ffodpfx Ajua E H Sofnju - Suitable for single wall pipes up to 220mm

Condition: used, Year of construction: 2019, Suitable for the additive manufacturing of high-precision 3D components using the SLM powder bed process. Materials: Tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, and Inconel. Accessories: Total enclosure, rePLUG "Standard" powder unit for powder storage and powder feed, extraction of metal powders from the process chamber, and automatic sieving. CELOS for LASERTEC SLM Fire extinguishing system al-deco-STD - Extinguishing unit: 5-liter argon cylinder CELOS App II OPTOMET (Basic) software package for automatic prediction and optimization of process parameters for selected materials: Max. travel X-axis: 325 mm Max. travel Y-axis: 325 mm Max. travel Z-axis: 400 mm Installation space size: 300 x 300 x 300 mm³ Ffedpfswhiycsx Afneu Layer thickness: 20 - 100 µm laser type: Ytterbium laser Laser power: max.: 400 W Focus diameter min: 35 µm tank volume: 50 dm³ Connected load approx.: 400 V / 50 Hz Weight approx: 1200 kg colour: Light grey, dark grey, red

Condition: excellent (used), Year of construction: 2017, Measuring range X 24, Y 18, Z 10 mm Magnification 12 - 25 - 38 - 50 x Fsdsu Erf Iopfx Afnjfu MARCELS MASCHINEN AG

Year of construction: 2024, condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Measuring arm opening and closing is motorized specimen diameter 0-30 mm Ffjdpfjiq Hxkex Afnou specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Multi-sensor coordinate measuring center in top condition with warranty and guarantee extensive services Hexagon Optiv 442 multisensor meter equipped with camera, laser and Renishaw probe system. · Measuring range single sensor: 410x410x200mm · Dimensions: 1232x910x1663mm Ffjdpfx Ajdyc Uaofnju · Weight: about 940kg · Max. Load weight: glass plate 30kg · Accuracies: U1 = 1.9 + L / 200; U2 = 2.4 + L / 150; U3 = 2.9 + L / 100 (L = measuring length in mm) · Max. Traversing speed per axis: 200mm / s · Incl. Camera with 2-step zoom · Incl. Laser · Incl. LED ring light · Incl. Renishaw 6-fold button changer · Incl. Renishaw TP200 touch probe · Incl. New frame grabber (Eagle) · Incl. 2-monitor operation · Incl. Windows 7 Ultimate evaluation station · On request including transport, commissioning and calibration

Condition: reconditioned (used), Year of construction: 2015, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 Fedpfx Afjnh Rnujnefu WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Year of construction: 2013, condition: used, machine/vehicle number: 6012, Etikettiergerät / Labeling machine EcoLine 100-XSR Baujahr / Year 2013 - Serial-No. 6012 Durchlassbreite / bandwidth 100mm Stoppgenauigkeit / stopping accuracy +/- 0.5mm Etikettenlänge / label length min. 10mm Etikettenbreite / label width min. 10mm Innen-Durchmesser Etikettenrolle / Inside diameter of label roll 40/76mm Aussen-Durchmesser Etikettenrolle / Outer diameter of label roll 300mm Netzspannung / Voltage 115/230V, 50/60Hz Leistungsaufnahme / power consumption 400 VA Zertifizierung / Certification CE IP-Schutz IP44 (optional IP54) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Ffsdpfx Afjlgz U Sonju Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test