Double Mitre Aluminium Circular Sawing

EMMEGI SCA 450

Year of construction: 1997, condition: used, Saw blade diameter: 450 mm Hydropneumatic saw blade feed via 2 hand controls Pneumatic material clamps Minimum quantity spray device Table can be rotated on both sides with locking points at 45° Weight: approx. 650 kg Gsdpfx Ajhxzlbjmbsiw Max. Saw blade diameter: 450 mm mass: about 700 kg

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Hydro 3000.6 Max. Glas-height: 3.000 mm Thickness: 3-22 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 6 brushes (150 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone Giedpswd N Ursfx Ambew LED lights on the outled for inspection

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull Giedol Tuvdepfx Ambsw -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t Gjdofx Hv Hopfx Ambsiw dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: good (used), 1 used surface grinding machine Giodpsxgbb Tefx Ambsw Manufacturer: Jung Model: HF 50 Technical specifications: - Z-axis travel: 400mm - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Equipped with: - Digital readout - Diaform device

Condition: used, Year of construction: 1996, Vollmer CHC 260 Year of manufacture: 1996 Gisdpfxoyuc Ifo Ambsw

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) Gijdpfx Aex Tu N Hombsw controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: excellent (used), functionality: fully functional, Welding machine: FUSION 4H Frame discharge unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning unit Rotary table Cleaning unit (second model) TRIMMER 4A Extraction table Second milling module (INTEGRA Q2) Q-MATIC 2 Gijdoxzzxbjpfx Ambsw Line supervisor laptop

Condition: excellent (used), functionality: fully functional, mileage: 638,700 km, first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, Year of construction: 2019, Equipment: ABS, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, Single-owner vehicle, always serviced exclusively at an official DAF workshop, with full, certified invoices and documentation available. Features: High-roof cab, alloy wheels, metallic paint, stainless steel side bars, PTO/hydraulic system, independent air conditioning, leather interior, manual gearbox, fitted with spoiler, alloy wheels, hydraulic system, in-cab TV, independent climate system, spare wheel, retarder, leather interior, front tires /55, rear tires /70. REGULARLY SERVICED WITH CERTIFIED AND GUARANTEED MILEAGE. Leasing and/or financing options available up to 60 installments, with the best rates available on the market. 12-month warranty available on request. The vehicle description may contain discrepancies compared to actual features, which must be checked on site. This listing does not constitute a contractual obligation under any circumstances. Gisdpfx Asyg H Rujmbew For further information or clarification, please contact the numbers provided, including via WhatsApp Direct. Mr. Paolo Antonio Gorgoni Photo documentation is taken on-site at our locations, so the photos are genuine and show the current condition of the vehicle. Please also note that the system automatically displays equipment and accessories, which may lead to some discrepancies. To ensure maximum accuracy, we invite you to always verify features and specifications directly with us.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 7232, Welding and cleaning center STUERTZ SE-VSM-B and SE-2AS-CNC Used, year of construction 2000 Giedsw Edz Aepfx Ambjw Database with Gealan, Rehau and Aluplast profiles. There is a function for welding HFL windows. Documentation, additional photo and video available. We can carry out installation and commissioning.