Lead/traction spindle lathe
EMCO EMCOMAT-17 D

Name: EMCO EMCOMAT-17 D
Brand: EMCO
Availability: InStock

Condition

Used

Location

Aurach

Lead/traction spindle lathe EMCO EMCOMAT-17 D

Show map

Machine data

Machine type:: Lead/traction spindle lathe

Manufacturer:: EMCO

Model:: EMCOMAT-17 D

Condition:: excellent (used)

Price & Location

Location:: Steinauer Weg 2a, 91589 Aurach, Deutschland

Call

Details about the offer

Listing ID:: A20576150

Update:: 30.01.2026

Description

Please read the technical specifications thoroughly. If you are considering the machine as an investment, we kindly request that, for an offer to be made, you provide full identification along with a correct phone number and email address.

EMCO Precision Lathe EMCOMAT 17 D

Including 3-axis EMCO digital display
Year of manufacture: 2007 with CE marking

Centre distance: 700 mm
Centre height: 170 mm
Kdodoxx S R Aspfx Ah Eoh
Swing over bed Ø 340 mm
Swing over cross slide Ø 190 mm
Bed width: 260 mm
Longitudinal slide travel: 600 mm
Cross slide travel: 220 mm
Top slide travel: 110 mm
Cross slide length: 410 mm
Cross slide width: 150 mm
Carriage guide length: 380 mm
Turning tool cross-section: 20 x 20 mm
Distance from turning centre to top slide: 34 mm
Top slide (compound) swivel range: 60 / 120°

Main spindle:

Spindle mounting: DIN 55029 (Camlock)
Spindle bore: Ø 50 mm
Internal taper to DIN 7178 1:22
Front bearing spindle diameter: Ø 70 mm
Max. chuck diameter: Ø 200 mm
Max. face plate diameter: Ø 200 mm
Spindle speeds: 40 - 3000 rpm
Stepless speed control
Number of mechanical speed ranges: 4

Main drive:

Power at 40% duty cycle: 5.3 kW
Max. nominal torque at drive spindle: 640 Nm

Feed:

20 (28) longitudinal feeds Z: 0.045 - 0.787 mm/rev
20 (28) cross feeds X: 0.023 - 0.406 mm/rev

Threads:

20 (28) metric threads (standard)
Pitch: 0.4 – 7.0 mm

Tailstock:

Quill diameter: Ø 50 mm
Quill internal taper: MK 3
Quill stroke: 120 mm
Offset: ±13 mm
Permissible workpiece weights: (between centres) 50 kg, supported by tailstock 150 kg

Weight: 755 kg
Dimensions: 1650 x 1060 x 1635 mm

The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and vocational training.

Equipment:

- EMCO 3-axis digital display with colour screen
- Potentiometer, EMERGENCY STOP button, speed digital display on control panel next to digital display
- 3-jaw chuck
- MULTIFIX tool post head size B
- Electrically interlocked chuck guard
- Quick-collet clamping device
- MICROJET coolant spray system
- Chip guard (rear wall)
- Machine lamp
- Machine feet
- Bed stop

Condition: Very good, from a training facility

"Due to its quality and price, this machine is not suitable for private individuals."

Available from March 2026.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2021

17 listings online

Call

Send inquiry

Telephone & Fax

+49 9804 ... show

These listings may also fit your interest.

Listing

Mindelheim

1,445 km

Guidance and lathe
EmcoEmcomat 17 D

Call

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Kdjdpfx Ahsdctnbe Ejh Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

See details

Listing

Schlüchtern

1,264 km

Lathe
Voest AlpineDA 160

€6,500

ONO plus VAT

Call

Listing

Ubstadt-Weiher

1,261 km

Lead/traction spindle lathe
EmcoEMCOMAT-17 D

€14,500

ONO plus VAT

Call

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 Kdedowvuf Tepfx Ah Ejh >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

See details

Auction

Bayern

1,462 km

Lead/traction spindle lathe
EMCOemcoMAT-17D

Details

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Kdodpfsv Iqlzsx Ah Esh Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

See details

Listing

OIching

1,487 km

CNC lathe
EMCOHyperturn 665 MC plus

Call

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Kodpsw Tg Adefx Ah Eodh Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

See details

Listing

Whirl Thread Machine - Automatic WALDRICH COBURG 16 GLS 25-90

Metzingen

1,339 km

Whirl Thread Machine - Automatic
WALDRICH COBURG16 GLS 25-90

Call

Listing

CNC hard turning machine with sub-spindle EMCO EMCOTURN E45

Korschenbroich

1,034 km

CNC hard turning machine with sub-spindle
EMCOEMCOTURN E45

Call

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Kdsdpfx Ahsw Rrvwe Ejh Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

See details

Listing

Mikkeli

2,273 km

Debarker
Valon Kone820

Call

Condition: reconditioned (used), functionality: fully functional, The VK820 single-rotor machine is equipped with an 800 mm rotor and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Alternatively, according to a client's needs, the rotor can be changed to another one (480/620). Kedpfxjwfdi He Ah Eedh

See details

Listing

Germany

1,414 km

Center Lathe
WMW MikromatDZFG 200x500

Call

Condition: used, Technical details: turning diameter over bed: 350 mm turning diameter over support: 200 mm turning length: 560 mm centre height: 170 mm spindle bore: Ø 32 mm range of revolution per miute: 36...1.800 / 8 step U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW Kodpfx Ahsvadd Ij Eedh weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m -Working stroke longitudinal support=580mm; plan support=170mm; top support 130mm; -Workpiece support via 3-jaw chuck Niles Ø 160mm, speed 2,800 rpm. -Tool holder quick change steel holder Multifix. Equipment: Cooling water pump 4 pieces machine feet Copying device *

See details

Listing

Drilling and Milling M/C HBM 40 H Deluxe

Velen

1,036 km

Drilling and Milling M/C
HBM40 H Deluxe

Call

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 730 x 210 mm connected load frequency 400 V boring feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet Kedpeupw T Dofx Ah Eedh - Swivel spindle head left / right 90 ° - Feed via hand crank

See details

Advertise here